Charles University in Prague, Faculty of Pharmacy in Hradec Králové Department of: Pharmaceutical Technology Thesis supervisor: Doc. PharmDr. Zdeňka Šklubalová, Ph.D. Consultant: Mgr. Pavel Ondrejček Student: Soňa Brtnová Title of Thesis: Evaluation of disintegration time of tablets containing theophylline The influence of used fillers on energetic profile of compression, especially influence on disintegration time of tablets with theophylline as a model drug, was studied in this thesis. Four tablet fillers were studied - microcrystalline cellulose Comprecel 102, lactose SpheroLac 100, calcium hydrogen phosphate anhydrous Di- Cafos A150 and calcium hydrogen phosphate dihydrate Di-Cafos D160. Tablets contained different proportion of two fillers, theophylline as a model drug and lubricant magnesium stearate. Tablets were compressed by the same compaction force 10 kN. The force- displacement record was evaluated using the particular energies of compaction process. Parameters of compaction process were influenced mostly by Comprecel 102. According to results there is no possibility to replace Di-Cafos D160 with Di-Cafos A150 in the mixtures. It was also found that SpheroLac 100 and Di-Cafos D160 shows similar behavior. Time of disintegration of tablets is mostly dependent on the used fillers. Tablets...

Charles University in Prague, Faculty of Pharmacy in Hradec Králové Department of Pharmaceutical Technology Consultant: Doc. PharmDr. Zdeňka Šklubalová, Ph.D. Student: Hana Janoutová Title of Thesis: Evaluation of tensile strength of tablets containing theophylline The aim of this thesis was to determine tensile strength of tablets containing theophylline. Tensile strength was studied as a function of the composition of mixtures of the used fillers and especially on their ratio. In the theoretical part, the used materials - lactose SpheroLac 100, microcrystalline cellulose Comprecel 102, dibasic calcium phosphate dihydrate Di-Cafos D160, anhydrous dibasic calcium phosphate Di-Cafos A150, theophylline and magnesium stearate are described. This work also evaluates force-displacement record, tensile strength and various factors that affect tensile strength. Parameters of force-displacement record and tensile strength of the tablets compressed with compresssion force 10 kN were evaluated in the experimental part. The measured results show that higher values of precompression energy (E1) and energy of plastic deformation (E2) were detected in mixtures A, C and E which contain Comprecel 102, and the lowest values were detected in mixtures B which contain Sphero-Lac 100 and Di-Cafos D160. Values of energy...

Charles University in Prague, Faculty of Pharmacy in Hradec Králové Department: Department of Pharmaceutical Technology Consultant: Doc. PharmDr. Zdeňka Šklubalová, Ph.D. Student: Andrea Matyášová Title of Thesis: Evaluation of compressibility of tableting mixtures containing theophylline using a compaction equation This thesis is aimed at the evaluation and comparison of excipients used in production of tablets. The compaction process of these excipients was evaluated using the parameters of the compaction equation. The mixtures of four fillers in various ratios were evaluated. These mixtures contained also theophylline as model drug and magnesium stearate as lubricant. The used three-exponential equation was previously developed by doc. RNDr. Milan Řehula, CSc. By using this compaction equation the volume reductions, speeds of volume reductions and consumed energies were calculated and evaluated. The results of this work showed that particular used fillers have different effect on the compaction process flow. That is caused primarily by different behavior of these materials during compaction and by formation of different types of bonds. Also the need of thorough cleaning and drying of compaction aid before compaction was confirmed.

Charles University in Prague, Faculty of Pharmacy in Hradec Králové Department of: Pharmaceutical Technology Consultant: Doc. PharmDr. Šklubalová Zdeňka, Ph.D. Student: Brunettová Monika Title of Thesis: Determination of flow properties of mixtures for preparation of tablets containing theophylline The aim of this diploma thesis was to characterize the flow properties and moisture content of mixtures for preparation of tablets containing theophylline. Parameters were monitored depending mainly on the content of the fillers, that were dicalcium phosphate, microcrystalline cellulose and lactose. Twenty-five prepared mixtures with different ratios of these fillers were evaluated. Flowability was evaluated by three methods stated in Czech Pharmacopoeia 2009 - compressibility index and Hausner ratio, flow through an orifice and angle of repose. Moisture content was evaluated as a weight loss during drying. Mixtures containing dicalcium phosphate and lactose proved more appropriate in terms of flowability, their flow properties are passable. However, according to the moisture content, mixture with microcrystalline cellulose are more preferable.

Charles University in Prague, Faculty of Pharmacy in Hradec Králové Department of: Pharmaceutical technology Consultant: Doc. PharmDr. Sklubalova Zdenka, Ph.D. Student: Marketa Hofmanova Title of Thesis: Measurement of stress relaxation of mixtures of microcrystalline cellulose and calcium hydrogen phosphate intended for the preparation of tablets with theophylline The powder mixtures with theophylline were studied from the aspect of viscoelastic properties of used materials and tablets tensile strength. In the theoretical part the thesis concerned with description of materials which were used in the mixtures. They are: Microcrystalline cellulose Comprecel 102, calcium hydrogen phosphate anhydrate Di-Cafos A150, calcium hydrogen phosphate dihydrate Di-Cafos D160 and lactose SpheroLac 100. The thesis also deals with the stress relaxation test. The stress relaxation test, its evaluation by several methods and its use in the pharmacy and in different fields are described. The experimental part deals with viscoelastic characteristics of the mixtures. These characteristics were evaluated by stress relaxation test with maximal compression force 10 kN and dwell time 180 s. Also the tensile strength was evaluated. The highest values of parameters of elasticity A1-3 and plasticity P1-3 were measured in...

Charles University in Prague, Faculty of Pharmacy in Hradec Králové Department of Pharmaceutical Technology Consultant: Doc. PharmDr. Šklubalová Zdeňka, Ph.D. Student: Barbora Vitverová Title of Thesis: Evaluation of elastic recovery of tablets containing theophylline This diploma thesis deals with evaluation of elastic recovery of tablets containing theophylline. The axial and radial elastic recovery is evaluated. Used materials are characterized in a theoretical part. It concerns microcrystalline cellulose Comprecel 102, lactose SpheroLac 100, calcii hydrogenphosphas anhydrous Di- Cafos A150, calcii hydrogenphosphas dihydrate Di-Cafos D160, magnesii stearas and theophylline. Further, compression process and its evaluation are described and also the elastic recovery of tablets after compression, its calculation and factors which can influence it. The experimental part of thesis deals with the elastic recovery of tablets. The tablets were compressed by compression strength 10 kN and the height and diameter were measured after 0, 3, 6 and 24 hours after compressing. The elastic recovery of tablets was calculated from these values. The dimensions of tablets at the maximal compression strength 10 kN were used as the initial values. From results is obvious that the highest elastic recovery is...

This diploma thesis was processed in the years 2018-2019 at the Institute of Horticultural Engineering of the Faculty of Horticulture of the Mendel University in Brno. The aim of this study was to verify and determine the yield of grapevine seed oil during pressing on a screw press with an emphasis on its working setting, especially on the revolutions per minute during pressing. Various possibilities of using marc and the seeds themselves were analyzed. However, we have focused on different ways of separation, seed drying technology and especially pressing methods. In the practical part were compared the results of the thousand grain weight, density of seeds, press performance and values of oil yield, as well as the content and density of oil in six selected varieties of Vitis vinifera L. Furthermore, a chapter dealing with the cost of operation was elaborated.

No description available.

Řešenou součástí je část kanálu pro odpadové odstřižky tiskařského stroje. Relativně jednoduchá součást vhodná k výrobě tvářením za studena. Diplomová práce navrhuje zhotovení komponenty lisováním. Po shrnutí základních teorií dále navrhuje varianty výroby. Pro vybranou sestavuje technologický postup a navrhuje kroky tváření. Návazně odvozuje návrh konstrukce postupového nástroje. V neposlední řadě se věnuje ekonomickému vyhodnocení výroby, ročnímu výrobnímu množství a vypočítává bod zvratu pro dané řešení.

The thesis presents a proposal of production of a molded part from the aluminum alloy of group 2024 (dural). Based on the theoretical study and the requirements of the company was designed a cutting tool with a rounded edge for cutting the unfolded shape of the part on the eccentric press LEN 40 C. A new forming tool from textite material for fluid press Quintus QFC was designed. The parts of the cutting tool were designed primarily from normalized (purchased) parts. Manufactured punch and shearing die are made of commonly available tool steels and processed on the attached drawings. The result of the thesis is a recommendation to invest in a specialized workplace for the production of a unfolded shape and reduction of laboriousness adjusting after forming.