Tecnécio-99m (99mTc), o produto de decaimento do molibdênio-99 (99Mo), é um dos radioisótopos mais utilizados na medicina nuclear, abrangendo cerca de 80% de todos os procedimentos de radiodiagnóstico médico pelo mundo. Atualmente o Brasil necessita de uma quantidade de aproximadamente 450 Ci de 99Mo por semana. Devido à crise e à escassez em seu fornecimento que vem sendo observada no cenário mundial desde 2008, o IPEN decidiu desenvolver um projeto próprio para produção de 99Mo através da fissão do urânio-235. O objetivo deste trabalho de dissertação foi desenvolver cálculos neutrônicos e temo-hidráulicos para avaliar a segurança operacional de um dispositivo para produção de 99Mo a ser irradiado no núcleo do reator IEA-R1. Neste dispositivo serão alojados dez alvos do tipo dispersão de UAlx-Al com baixo enriquecimento de urânio (LEU) e densidade de 2,889 gU/cm³. Para o cálculo neutrônico foram utilizados os programas computacionais HAMMER-TECHNION e CITATION e as temperaturas máximas atingidas nos alvos foram calculadas com o código MTRCR-IEAR1. Os cálculos demonstram que a irradiação do dispositivo deverá ocorrer sem consequências adversas à operação do reator. A quantidade total de 99Mo foi calculada com o programa SCALE e considerando que o tempo necessário para o processamento químico e recuperação do 99Mo será de cinco dias após a irradiação, teremos disponível para distribuição uma atividade de 99Mo de 176 Ci para 3 dias de irradiação, 236 Ci para 5 dias de irradiação e 272 Ci para 7 dias de irradiação dos alvos. / Technetium-99m (99mTc), the product of radioactive decay of molybdenum-99 (99Mo), is one of the most widely used radioisotope in nuclear medicine, covering approximately 80% of all radiodiagnosis procedures in the world. Nowadays, Brazil requires an amount of about 450 Ci of 99Mo per week. Due to the crisis and the shortage of 99Mo supply chain that has been observed on the world since 2008, IPEN/CNEN-SP decided to develop a project to produce 99Mo through fission of uranium-235. The objective of this dissertation was the development of neutronic and thermal-hydraulic calculations to evaluate the operational safety of a device for 99Mo production to be irradiated in the IEA-R1 reactor core at 5 MW. In this device will be placed ten targets of UAlx-Al dispersion fuel with low enriched uranium (LEU) and density of 2.889 gU/cm³. For the neutronic calculations were utilized the computer codes HAMMER-TECHNION and CITATION and the maximum temperatures reached in the targets were calculated with the code MTRCR-IEAR1. The analysis demonstrated that the device irradiation will occur without adverse consequences to the operation of the reactor. The total amount of 99Mo was calculated with the program SCALE and considering that the time needed for the chemical processing and recovering of the 99Mo will be five days after the irradiation, we have that the 99Mo activity available for distribution will be 176 Ci for 3 days of irradiation, 236 Ci for 5 days of irradiation and 272 Ci for 7 days of targets irradiation.

Tecnécio-99m (99mTc), o produto de decaimento do molibdênio-99 (99Mo), é um dos radioisótopos mais utilizados na medicina nuclear, abrangendo cerca de 80% de todos os procedimentos de radiodiagnóstico médico pelo mundo. Atualmente o Brasil necessita de uma quantidade de aproximadamente 450 Ci de 99Mo por semana. Devido à crise e à escassez em seu fornecimento que vem sendo observada no cenário mundial desde 2008, o IPEN decidiu desenvolver um projeto próprio para produção de 99Mo através da fissão do urânio-235. O objetivo deste trabalho de dissertação foi desenvolver cálculos neutrônicos e temo-hidráulicos para avaliar a segurança operacional de um dispositivo para produção de 99Mo a ser irradiado no núcleo do reator IEA-R1. Neste dispositivo serão alojados dez alvos do tipo dispersão de UAlx-Al com baixo enriquecimento de urânio (LEU) e densidade de 2,889 gU/cm³. Para o cálculo neutrônico foram utilizados os programas computacionais HAMMER-TECHNION e CITATION e as temperaturas máximas atingidas nos alvos foram calculadas com o código MTRCR-IEAR1. Os cálculos demonstram que a irradiação do dispositivo deverá ocorrer sem consequências adversas à operação do reator. A quantidade total de 99Mo foi calculada com o programa SCALE e considerando que o tempo necessário para o processamento químico e recuperação do 99Mo será de cinco dias após a irradiação, teremos disponível para distribuição uma atividade de 99Mo de 176 Ci para 3 dias de irradiação, 236 Ci para 5 dias de irradiação e 272 Ci para 7 dias de irradiação dos alvos. / Technetium-99m (99mTc), the product of radioactive decay of molybdenum-99 (99Mo), is one of the most widely used radioisotope in nuclear medicine, covering approximately 80% of all radiodiagnosis procedures in the world. Nowadays, Brazil requires an amount of about 450 Ci of 99Mo per week. Due to the crisis and the shortage of 99Mo supply chain that has been observed on the world since 2008, IPEN/CNEN-SP decided to develop a project to produce 99Mo through fission of uranium-235. The objective of this dissertation was the development of neutronic and thermal-hydraulic calculations to evaluate the operational safety of a device for 99Mo production to be irradiated in the IEA-R1 reactor core at 5 MW. In this device will be placed ten targets of UAlx-Al dispersion fuel with low enriched uranium (LEU) and density of 2.889 gU/cm³. For the neutronic calculations were utilized the computer codes HAMMER-TECHNION and CITATION and the maximum temperatures reached in the targets were calculated with the code MTRCR-IEAR1. The analysis demonstrated that the device irradiation will occur without adverse consequences to the operation of the reactor. The total amount of 99Mo was calculated with the program SCALE and considering that the time needed for the chemical processing and recovering of the 99Mo will be five days after the irradiation, we have that the 99Mo activity available for distribution will be 176 Ci for 3 days of irradiation, 236 Ci for 5 days of irradiation and 272 Ci for 7 days of targets irradiation.

A breed-and-burn molten salt reactor (BBMSR) concept is proposed to address the Generation IV fuel cycle sustainability objective in a once-through cycle with low enrichment and no reprocessing. The BBMSR uses separate fuel and coolant molten salts, with the fuel contained in assemblies of individual tubes that can be shuffled and reclad periodically to enable high burnup. In this dual-salt configuration, the BBMSR may overcome several limitations of previous breed-and-burn (B$\&$B) designs to achieve high uranium utilisation with a simple, passively safe design. A central challenge in design of the BBMSR fuel is balancing the neutronic requirement of large fuel volume fraction for B$\&$B mode with the thermal-hydraulic requirements for safe and economically competitive reactor operation. Natural convection of liquid fuel within the tubes aids heat transfer to the coolant, and a systematic approach is developed to efficiently model this complex effect. Computational fluid dynamics modelling is performed to characterise the unique physics of the system and produce a new heat transfer correlation, which is used alongside established correlations in a numerical model. A design framework is built around this numerical model to iteratively search for the limiting power density of a given fuel and channel geometry, applying several defined temperature and operational constraints. It is found that the trade-offs between power density, core pressure drop, and pumping power are lessened by directing the flow of coolant downwards through the channel. Fuel configurations that satisfy both neutronic and thermal-hydraulic objectives are identified for natural, 5$\%$ enriched, and 20$\%$ enriched uranium feed fuel. B$\&$B operation is achievable in the natural and 5$\%$ enriched versions, with power densities of 73 W/cm$^3$ and 86 W/cm$^3$, and theoretical uranium utilisations of 300 $\mathrm{MWd/kgU_{NAT}}$ and 25.5 $\mathrm{MWd/kgU_{NAT}}$, respectively. Using 20$\%$ enriched feed fuel relaxes neutronic constraints so a wider range of fuel configurations can be considered, but there is a strong inverse correlation between power density and uranium utilisation. The fuel design study demonstrates the flexibility of the BBMSR concept to operate along a spectrum of modes ranging from high fuel utilisation at moderate power density using natural uranium feed fuel, to high power density and moderate utilisation using 20$\%$ uranium enrichment.