A rise in the need for dynamic energy allocation has been associated with the saturation of available portable wireless electronic devices. Currently, the methods for transmitting this energy efficiently have been limited to a number of options, including near field resonant magnetic coupling. Previous research with mid-range (dâ 4r) wireless power transfer has resulted in coupling efficiencies of close to 40%. In order to increase efficiency in transfer a more directive transmission system was developed using a phased array. Coupling networks were used to shift the resonance of the coupling device, leading to a tightly coupled network by array phasing. Coupling networks for the phased array were optimized using a hybrid combination of a full wave Method of Moments simulation with circuit simulation. Results were validated in a full wave simulator, and field results were shown during resonance. S-parameter results show simulated transfer efficiencies of 70% (-1.5dB) for a phased array structure and 62.3% (-2.4dB) for a single feed structure. Single feed prototyping S-parameter results show coupling efficiencies of 25% (-5.9dB). All coupling measurements are at a distance 4r with reference to the largest transmitting coupler. / Master of Science

This research has its basis in developments within the field of inductive powering and wireless power transfer, WPT, and more specifically one the branch within this field, which is called magnetic resonance coupling. This principle enables efficient power transfer from a transmitting unit to a receiving unit at a distance of some times the unit diameter. The developments within magnetic resonant coupling are together with the possibilities and challenges of today’s smart textile industry the starting point to investigate a novel textile-based product concept for WPT by combining both technologies. Multiple textile samples, consisting of cotton and electrically conductive copper yarns, were produced by weaving technique, additional assembling of electronic components were performed manually and several measurements were carried out to investigate the sample characteristics and the sample performance in terms of power transfer. The produced samples showed to behave similarly to conventional inductors and were able to transfer power over some distance.