O trabalho de doutorado teve como objetivo desenvolver um modulador óptico baseado em filme magnetostrictivo para aplicação como magnetômetro. A modelagem e simulação do dispositivo foi realizada utilizando software com cálculo por método dos elementos finitos (MEF) e teve como finalidade auxiliar iterativamente os processos de projeto e fabricação do modulador. A originalidade da proposta baseia-se na construção de um guia de onda em óptica integrada recoberto por um filme magnetostrictivo para permitir a modulação , via efeito elasto-óptico, da onda guiada pela aplicação de campos magnéticos externos. O campo magnético aplicado provoca a deformação o material magnetostrictivo que induz uma modificação no perfil de esforço aplicado ao substrato. O substrato tem suas propriedades ópticas alteradas devido ao efeito elasto-óptico, o que provoca mudanças nas propriedades da luz transmitida. O trabalho tem seu início com o estudo e a caracterização de filmes magnetostrictivos de Tb25F275 e Tb23Co77 depositados por sputtering sobre substratos de silício. Uma técnica para preparação das amostras e medição da magnetostricção foi estabelecida e os coeficientes de magnetostrição dos filmes foram determinados a partir das medições diretas dos deslocamentos das amostras, em função dos campos magnéticos aplicados, utilizando a técnica de Atomic Force Microscopy (AFM). Os resultados experimentais obtidos permitiram a realização de simulações por MEF para verificação dos modos de guiamento da luz gerados pelo perfil de esforços induzidos termicamente no processo de deposição do filme magnetostrictivo sobre substrato de B12GeO4 (BGO). Foi modelado e simulado também o efeito da aplicação do campo magnético sobre o guia óptico obtido inicialmente pelo efeito de esforço térmico. No resultado das simulações foi possível verificar as alterações do índice de refração efetivo e da intensidade óptica do modo guiado em função de campos magnéticos aplicados ao modulador. Ao final do trabalho realizaram-se a fabricação de alguns protótipos. Os resultados das caracterizações dos moduladores construídos permitirão, no futuro, ajustar os modelos de simulação elaborados. / The doctoral work aims are the development and simulation of an optical modulator based on the effect of magnetostriction for application as magnetometer. The multiphysics simulations were performed using the Finite Elements Method (FEM). In the manufacturing process of optical modulator integrated optics techniques were applied. The originality of the proposal is based on the construction of an integrated optical waveguide covered by a magnetostrictive film to allow the modulation of the guided wave, through the elasto-optical effect, by the application of external magnetic fields. The applied magnetic field causes deformation of the magnetostrictive material that induces a modification of the stress profile produced in substrate. The substrate has its optical properties altered due to the elasto-optical effect, which causes changes in the properties of transmitted light. The work begins with the study and characterization of TbFe and TbCo2 magnetostrictive films deposited by sputtering on silicon substrates. A method for sample preparation and measurement of magnetostriction was established. The magnetostrictive coefficient of the films was determined from the direct measurement of displacements of samples by AFM technique for magnetic fields applied. The experimental results obtained allowed to perform MEF simulations to verify the light guided modes generated by the profile of thermally induced stress created by deposition process of magnetostrictive film on B12GeO4 (BGO) substrate. It was also modeled and simulated the effect of the application of magnetic field on the optical guide obtained initially by the effect of thermal stress. In simulation results, it was possible to verify the changes of effective refractive index and optical intensity of guided modes as functions of magnetic fields applied to the modulator. At the end of the work, some prototypes were fabricated. The results of characterizations of the built modulators will allow, in the future, adjustments in simulation models.

O trabalho de doutorado teve como objetivo desenvolver um modulador óptico baseado em filme magnetostrictivo para aplicação como magnetômetro. A modelagem e simulação do dispositivo foi realizada utilizando software com cálculo por método dos elementos finitos (MEF) e teve como finalidade auxiliar iterativamente os processos de projeto e fabricação do modulador. A originalidade da proposta baseia-se na construção de um guia de onda em óptica integrada recoberto por um filme magnetostrictivo para permitir a modulação , via efeito elasto-óptico, da onda guiada pela aplicação de campos magnéticos externos. O campo magnético aplicado provoca a deformação o material magnetostrictivo que induz uma modificação no perfil de esforço aplicado ao substrato. O substrato tem suas propriedades ópticas alteradas devido ao efeito elasto-óptico, o que provoca mudanças nas propriedades da luz transmitida. O trabalho tem seu início com o estudo e a caracterização de filmes magnetostrictivos de Tb25F275 e Tb23Co77 depositados por sputtering sobre substratos de silício. Uma técnica para preparação das amostras e medição da magnetostricção foi estabelecida e os coeficientes de magnetostrição dos filmes foram determinados a partir das medições diretas dos deslocamentos das amostras, em função dos campos magnéticos aplicados, utilizando a técnica de Atomic Force Microscopy (AFM). Os resultados experimentais obtidos permitiram a realização de simulações por MEF para verificação dos modos de guiamento da luz gerados pelo perfil de esforços induzidos termicamente no processo de deposição do filme magnetostrictivo sobre substrato de B12GeO4 (BGO). Foi modelado e simulado também o efeito da aplicação do campo magnético sobre o guia óptico obtido inicialmente pelo efeito de esforço térmico. No resultado das simulações foi possível verificar as alterações do índice de refração efetivo e da intensidade óptica do modo guiado em função de campos magnéticos aplicados ao modulador. Ao final do trabalho realizaram-se a fabricação de alguns protótipos. Os resultados das caracterizações dos moduladores construídos permitirão, no futuro, ajustar os modelos de simulação elaborados. / The doctoral work aims are the development and simulation of an optical modulator based on the effect of magnetostriction for application as magnetometer. The multiphysics simulations were performed using the Finite Elements Method (FEM). In the manufacturing process of optical modulator integrated optics techniques were applied. The originality of the proposal is based on the construction of an integrated optical waveguide covered by a magnetostrictive film to allow the modulation of the guided wave, through the elasto-optical effect, by the application of external magnetic fields. The applied magnetic field causes deformation of the magnetostrictive material that induces a modification of the stress profile produced in substrate. The substrate has its optical properties altered due to the elasto-optical effect, which causes changes in the properties of transmitted light. The work begins with the study and characterization of TbFe and TbCo2 magnetostrictive films deposited by sputtering on silicon substrates. A method for sample preparation and measurement of magnetostriction was established. The magnetostrictive coefficient of the films was determined from the direct measurement of displacements of samples by AFM technique for magnetic fields applied. The experimental results obtained allowed to perform MEF simulations to verify the light guided modes generated by the profile of thermally induced stress created by deposition process of magnetostrictive film on B12GeO4 (BGO) substrate. It was also modeled and simulated the effect of the application of magnetic field on the optical guide obtained initially by the effect of thermal stress. In simulation results, it was possible to verify the changes of effective refractive index and optical intensity of guided modes as functions of magnetic fields applied to the modulator. At the end of the work, some prototypes were fabricated. The results of characterizations of the built modulators will allow, in the future, adjustments in simulation models.

Thesis (Ph.D.); Submitted to the University of California, Berkeley, CA (US); 21 Dec 2004. / Published through the Information Bridge: DOE Scientific and Technical Information. "LBNL--56768" Urban, Jeffry Todd. USDOE Director. Office of Science. Office of Basic Energy Sciences (US) 12/21/2004. Report is also available in paper and microfiche from NTIS.

Η παρούσα διδακτορική διατριβή αποτελεί ένα συνδυαστικό ερευνητικό προϊόν που στοιχειοθετείται από την ανάπτυξη υπολογιστικών εργαλείων επεξεργασίας και ανάλυσης θαλάσσιων γεωφυσικών δεδομένων και την εφαρμογή τους σε πρωτογενή δεδομένα, συλλεγμένα από το Εργαστήριο Θαλάσσιας Γεωλογίας και Φυσικής Ωκεανογραφίας (Ε.ΘΑ.ΓΕ.Φ.Ω) του πανεπιστημίου Πατρών, κατά το διάστημα 2005 – 2011. Τα πεδία στα οποία συγκεντρώνεται το κέντρο βάρους της διατριβής είναι: 1) τα συστήματα ακουστικής ταξινόμησης πυθμένα και 2) η χαρτογράφηση και παραμετροποίηση εμφανίσεων των πολύ σημαντικών θαλάσσιων ενδιαιτημάτων της Ποσειδώνιας και των κοραλλιογενών σχηματισμών στο Ιόνιο και στο Αιγαίο πέλαγος. Έτσι αναπτύχθηκαν και παρουσιάστηκαν εκτενώς τα λογισμικά εργαλεία SonarClass και TargAn, που αναφέρονται αντίστοιχα στην αυτόματη ακουστική ταξινόμηση πυθμένα και την παραμετροποίηση περιοχών ενδιαφέροντος σε εικόνες ηχοβολιστών ευρείας σάρωσης και εφαρμόστηκαν για την χαρτογράφηση λειμώνων ποσειδώνιας στη Ζάκυνθο και κοραλλιογενών σχηματισμών (τραγάνας) στις Κυκλάδες νήσους. Παράλληλα και επεκτείνοντας το εύρος των ερευνητικών προϊόντων αυτής της διατριβής, αναπτύχθηκαν επίσης: 1) το λογισμικό SBP-Im-An για τη γεωαναφορά και ψηφιοποίηση παλαιών αναλογικών καταγραφών τομογράφων υποδομής πυθμένα, 2) το λογισμικό χωροστάθμησης θαλάσσιων γεωμαγνητικών δεδομένων MagLevel και 3) το λογισμικό ποσοτικοποίησης αλιευτικών ιχνών σε δεδομένα ηχοβολιστών ευρείας σάρωσης PgStat, με αντίστοιχες σημαντικές εφαρμογές σε πρωτογενή δεδομένα. Η παρούσα διατριβή επιδεικνύει πρωτοτυπία τόσο σε επίπεδο ανάπτυξης νέων μεθόδων ανάλυσης και επεξεργασίας γεωφυσικών δεδομένων όσο και σε επίπεδο παρουσίασης εφαρμογών τους σε περιοχές μελέτης με ιδιαίτερο περιβαλλοντικό ενδιαφέρον αλλά και σε πεδία έρευνας για τα οποία το ενδιαφέρον της σύγχρονης θαλάσσιας επιστημονικής κοινότητας βρίσκεται στο απόγειό του. / The present PhD thesis is a combinational research product concerning the development of software tools for the processing and analysis of marine geophysical data and their application to original data, collected by the Laboratory of Marine Geology and Physical Oceanography (L.M.G.P.O), university of Patras, Greece, during the period 2005-2011. The fields that this thesis focuses on are: 1) the Acoustic Seabed Classification Systems and 2) the mapping and quantification of very important marine habitats that specifically are the Posidonia Oceanica Prairies and the Coralline formations in the Aegean and Ionian seas. The software tools SonarClass and TargAn, that respectively refer to the Acoustic Seabed Classification and the quantification of Regions Of Interest in swath sonar imagery are presented and applied to the cases of Posidonia Oceanica in Zakinthos Isl. (Ionian Sea) and Coralline formations in Cyclades Isl. (Aegean Sea). Additionally and extending the range of the research products of this thesis, other software tools that are presented are: 1) the SBP-Im-An for the recreation (georeferencing and digitization) of old analog Sub Bottom Profiler recordings, 2) the MagLevel for the tie line leveling of marine geomagnetic data and 3) the PGStat for the quantification of trawl marks in swath sonar imagery, all of them with significant applications to original data. This thesis demonstrates originality due to both the development of new methods for the analysis and processing of marine geophysical data and the applications to study areas with particular environmental interest and research fields for which the attention of the marine scientists is at its peak.

This master's thesis focuses on the utilization of an artificially created weak magnetic field for navigation in 3D space. The theoretical part of this work deals with the general properties of the magnetic field and with its description. The next section of the theoretical part contains an overview of measuring principles for magnetic field measurements. Based on various types of measuring principles, the thesis elaborates on commercially available miniature sensors for magnetic field measurement with a measuring range up to 10 mT. The work focuses mainly on the magnetoresistive principle and fluxgate sensors. Furthermore, the theoretical part contains descriptions of methods for modeling the magnetic field of simple permanent magnets and various magnet assemblies. Lastly, the theoretical part involves a patent search of devices used for locating magnets that are installed in an intramedullary nail, which is used in intramedullary stabilization used on fractures of human bones. By locating the magnet in the nail, it is possible to precisely determine the position of the mounting holes. The practical part of the thesis deals with the analysis of magnetic field behavior in the vicinity of various magnetic assemblies, which were modeled in COMSOL Multiphysics using the finite element method. The models were created with the aim of analysing the behaviour of the magnetic field in the vicinity of the magnets and at the same time to find possible analytical functions that could be used to determine the position of the magnet in space relative to the probe. The result of this work is an analysis of various assemblies, which contains graphs of different dependencies and prescription of polynomial functions that approximate these dependencies. Another part of the thesis is the design of a probe that serves to locate the magnetic target. The work describes two possible methods of localization. For the differential method, a user interface in LabVIEW was created. The probe based on this method is fully capable of locating the magnet in the 2D plane. The state space search method is described only in theory.