Master’s thesis deals with diagnostics and reconstruction of neo-gothic chapel in Medlice. Summary of appropriate testing methods for this chapel is compiled. Visual examination of whole structure have been performed by diagnostics. Masonry element strength was found out at specimens which had were taken out from structure (drill cores and whole bricks). Masonry elements also was tested by Schmidt hammer LB. Mortar was tested by Kucera’s drill. Masonry strength required for static calculation was computed from achieved values. After examination of all structure defects have been designed reconstruction by post-tensioning.

The dissertation deals with selected issues in the field of the calculation of the response of building structures which are excited with dynamic non-stationary displacement loading of its ground. Seismic load has been assumed. Procedures, how to work with seismic records with respect to the accuracy of dynamic calculations, how to modify the response spectrum to ensure the reliability, how to generate synthetic accelerogram requiring more accurate response, are recommended. Synthetic akcelerogram has been generated by own approaching, which has been used as the excitation function in the experimental seismic testing of autoclaved concrete brick building in model scale. Response values of motion in the measured points of the experiment were compared with the linear and nonlinear dynamic calculations by using the finite element method models. Different levels of detail of the numerical models have been used. The shear wall behaviour has been modelled by using constitutive models with brittle failure as well as using of non-linear interaction interface with possible delamination between the masonry bricks. The behaviour of the mathematical model of wall systems has been calibrated with respect to the measured data at shear wall experiments in real and model scale of walls.

The subject of the master thesis is design of a new detached office building for public administration of Czech Republic Police as a district department in Brno-Černovice. It is presented as a form part of project documentation for a building construction. The building has a cellar and two above-ground floors. It is founded on a strip foundation and pads. The building is roofed by green roof. There are office rooms, sanitary facilities, archives, interrogation rooms, pre-trial detention cells, garages, storage rooms and dog cages in the above-ground part. In the basement, there are technical facilities and shooting range backround. Structural system of the building is wall longitudinal masonry system from clay blocks. The ceiling structure is from cast-in-place reinforced concrete. The part of the building is with ventilated facade a nd rest is insulated with contact thermal insulation.

The thesis is focused on the technological project of an indoor tennis hall construction in Uherský Brod. It is completely embracing the construction of the hall in terms of a carcass with its roofing. It reveals a technical report that describes the construction with reference to the used construction materials, positioning in the site and looking into its impact of the building on the environment. The following aim of the thesis is also a design of a machinery needed to implement the object. It also shows an assessment of machines and mechanization transport routes in terms of road traffic, a time and financial plan of construction, a draft and design of the equipment construction site, an analysis of economic costs of the construction, a material resources plan for the construction, a technological regulation of a flat roof and a quality test scheme along the construction.