Hyperspectral remote sensing image data, such as that recorded by AVIRIS with 224 spectral bands, provides rich information on ground cover types. However, it presents new problems in machine assisted interpretation, mainly in long processing times and the difficulties of class training due to the low ratio of number of training samples to the number of bands. This thesis investigates feasible and efficient feature reduction and image classification techniques which are appropriate for hyperspectral image data. The study is reported in three parts. The first concerns a deterministic approach for hyperspectral data interpretation. Multigroup and multiple threshold spectral coding procedures, and associated techniques for spectral matching and classification, are proposed and tested. By coding on subgroups of bands using one or three thresholds, spectral searching and matching becomes simple, fast and free of the need for radiometric correction. Modifications of existing statistical techniques are proposed in the second part of the investigation A block-based maximum likelihood classification technique is developed. Several subgroups are formed from the complete set of spectral bands in the data, based on the properties of global correlation among the bands. Subgroups which are poorly correlated with each other are treated independently using conventional maximum likelihood classification. Experimental results demonstrate that, when using appropriate subgroup sizes, the new method provides a compromise among classification accuracy, processing time and available training pixels. Furthermore, a segmented, and possibly multi-layer, principal components transformation is proposed as a possible feature reduction technique prior to classification, and for effective colour display. The transformation is performed efficiently on each of the highly correlated subgroups of bands independently. Selected features from each transformed subgroup can be then transformed again to achieve a satisfactory data reduction ratio and to generate the three most significant components for colour display. Classification accuracy is improved and high quality colour image display is achieved in experiments using two AVIRIS data sets.

As well as the many benefits associated with the evolution of multispectral sensors into hyperspectral sensors there is also a considerable increase in storage space and the computational load to process the data. Consequently the remote sensing ommunity is investigating and developing statistical methods to alleviate these problems. / The research presented here investigates several approaches to reducing the dimensionality of hyperspectral remotely sensed data while maintaining the levels of accuracy achieved using the full dimensionality of the data. It was conducted with an emphasis on applications in maximum likelihood classification (MLC) of hyperspectral image data. An inherent characteristic of hyperspectral data is that adjacent bands are typically highly correlated and this results in a high level of redundancy in the data. The high correlations between adjacent bands can be exploited to realise significant reductions in the dimensionality of the data, for a negligible reduction in classification accuracy. / The high correlations between neighbouring bands is related to their response functions overlapping with each other by a large amount. The spectral band filter functions were modelled for the HyMap instrument that acquires hyperspectral data used in this study. The results were compared with measured filter function data from a similar, more recent HyMap instrument. The results indicated that on average HyMap spectral band filter functions exhibit overlaps with their neighbouring bands of approximately 60%. This is considerable and partly accounts for the high correlation between neighbouring spectral bands on hyperspectral instruments. / A hyperspectral HyMap image acquired over an agricultural region in the south west of Western Australia has been used for this research. The image is composed of 512 × 512 pixels, with each pixel having a spatial resolution of 3.5 m. The data was initially reduced from 128 spectral bands to 82 spectral bands by removing the highly overlapping spectral bands, those which exhibit high levels of noise and those bands located at strong atmospheric absorption wavelengths. The image was examined and found to contain 15 distinct spectral classes. Training data was selected for each of these classes and class spectral mean and covariance matrices were generated. / The discriminant function for MLC makes use of not only the measured pixel spectra but also the sample class covariance matrices. This thesis first examines reducing the parameterization of these covariance matrices for use by the MLC algorithm. The full dimensional spectra are still used for the classification but the number of parameters needed to describe the covariance information is significantly reduced. When a threshold of 0.04 was used in conjunction with the partial correlation matrices to identify low values in the inverse covariance matrices, the resulting classification accuracy was 96.42%. This was achieved using only 68% of the elements in the original covariance matrices. / Both wavelet techniques and cubic splines were investigated as a means of representing the measured pixel spectra with considerably fewer bands. Of the different mother wavelets used, it was found that the Daubechies-4 wavelet performed slightly better than the Haar and Daubechies-6 wavelets at generating accurate spectra with the least number of parameters. The wavelet techniques investigated produced more accurately modelled spectra compared with cubic splines with various knot selection approaches. A backward stepwise knot selection technique was identified to be more effective at approximating the spectra than using regularly spaced knots. A forward stepwise selection technique was investigated but was determined to be unsuited to this process. / All approaches were adapted to process an entire hyperspectral image and the subsequent images were classified using MLC. Wavelet approximation coefficients gave slightly better classification results than wavelet detail coefficients and the Haar wavelet proved to be a more superior wavelet for classification purposes. With 6 approximation coefficients, the Haar wavelet could be used to classify the data with an accuracy of 95.6%. For 11 approximation coefficients this figure increased to 96.1%. / First and second derivative spectra were also used in the classification of the image. The first and second derivatives were determined for each of the class spectral means and for each band the standard deviations were calculated of both the first and second derivatives. Bands were then ranked in order of decreasing standard deviation. Bands showing the highest standard deviations were identified and the derivatives were generated for the entire image at these wavelengths. The resulting first and second derivative images were then classified using MLC. Using 25 spectral bands classification accuracies of approximately 96% and 95% were achieved using the first and second derivative images respectively. These results are comparable with those from using wavelets although wavelets produced higher classification accuracies when fewer coefficients were used.

This thesis presents an automatic soil texture classification system using hyperspectral soil signals and wavelet-based statistical models. Previous soil texture classification systems are closely related to texture classification methods, which use images for training and testing. Although using image-based algorithms is a straightforward way to conduct soil texture classification, our research shows that it does not provide reliable and consistent results. Rather, we develop a novel system using hyperspectral soil textures, better known as hyperspectral soil signals, which provide rich information and intrinsic properties about soil textures. Hyperspectral soil textures, in their very nature, are nonstationary and time-varying. Therefore, the wavelet transform, which is proven to be successful in such applications, is incorporated. In this study, we incorporate two wavelet-domain statistical models, namely, the maximum likelihood (ML) and the hidden Markov model (HMM) for the classification task. Experimental results show that this method is reliable and robust. It is also more effective and efficient in terms of practical implementation than the traditional image-based methods.