21 |
Carrier Recovery in burst-mode 16-QAMChen, Jingxin 30 June 2004 (has links)
Wireless communication systems such as multipoint communication systems (MCS) are becoming attractive as cost-effective means for providing network access in sparsely populated, rugged, or developing areas of the world. Since the radio spectrum is limited, it is desirable to use spectrally efficient modulation methods such as quadrature amplitude modulation (QAM) for high data rate channels. Many MCS employ time division multiple access (TDMA) and/or time division duplexing (TDD) techniques, in which transmissions operate in bursts. In many cases, a preamble of known symbols is appended to the beginning of each burst for carrier and symbol timing recovery (symbol timing is assumed known in this thesis). Preamble symbols consume bandwidth and power and are not used to convey information. In order for burst-mode communications to provide efficient data throughput, the synchronization time must be short compared to the user data portion of the burst. <p> Traditional methods of communication system synchronization such as phase-locked loops (PLLs) have demonstrated reduced performance when operated in burst-mode systems. In this thesis, a feedforward (FF) digital carrier recovery technique to achieve rapid carrier synchronization is proposed. The estimation algorithms for determining carrier offsets in carrier acquisition and tracking in a linear channel environment corrupted by additive white Gaussian noise (AWGN) are described. The estimation algorithms are derived based on the theory of maximum likelihood (ML) parameter estimation. The estimations include data-aided (DA) carrier frequency and phase estimations in acquisition and non-data-aided (NDA) carrier phase estimation in tracking. The DA carrier frequency and phase estimation algorithms are based on oversampling of a known preamble. The NDA carrier phase estimation makes use of symbol timing knowledge and estimates are extracted from the random data portion of the burst. The algorithms have been simulated and tested using Matlab® to verify their functionalities. The performance of these estimators is also evaluated in the burst-mode operations for 16-QAM and compared in the presence of non-ideal conditions (frequency offset, phase offset, and AWGN). The simulation results show that the carrier recovery techniques presented in this thesis proved to be applicable to the modulation schemes of 16-QAM. The simulations demonstrate that the techniques provide a fast carrier acquisition using a short preamble (about 111 symbols) and are suitable for burst-mode communication systems.
|
22 |
Pairwise Multiple Comparisons Under Short-tailed Symmetric DistributionBalci, Sibel 01 May 2007 (has links) (PDF)
In this thesis, pairwise multiple comparisons and multiple comparisons with a control are studied when the observations have short-tailed symmetric distributions.
Under non-normality, the testing procedure is given and Huber estimators, trimmed mean with winsorized standard deviation, modified maximum likelihood estimators and ordinary sample mean and sample variance used in this procedure are reviewed.
Finally, robustness properties of the stated estimators are compared with each other and it is shown that the test based on the modified maximum likelihood estimators has better robustness properties under short-tailed symmetric distribution.
|
23 |
On Multivariate Longitudinal Binary Data Models And Their Applications In ForecastingAsar, Ozgur 01 July 2012 (has links) (PDF)
Longitudinal data arise when subjects are followed over time. This type of data is typically dependent, due to including repeated observations and this type of dependence is termed as within-subject dependence. Often the scientific interest is on multiple longitudinal measurements which introduce two additional types of associations, between-response and cross-response temporal dependencies. Only the statistical methods which take these association structures might yield reliable and valid statistical inferences. Although the methods for univariate longitudinal data have been mostly studied, multivariate longitudinal data still needs more work. In this thesis, although we mainly focus on multivariate longitudinal binary data models, we also consider other types of response families when necessary. We extend a work on multivariate marginal models, namely multivariate marginal models with response specific parameters (MMM1), and propose multivariate marginal models with shared regression parameters (MMM2). Both of these models are generalized estimating equation (GEE) based, and are valid for several response families such as Binomial, Gaussian, Poisson, and Gamma. Two different R packages, mmm and mmm2 are proposed to fit them, respectively. We further develop a marginalized multilevel model, namely probit normal marginalized transition random effects models (PNMTREM) for multivariate longitudinal binary response. By this model, implicit function theorem is introduced to explicitly link the levels of marginalized multilevel models with transition structures for the first time. An R package, bf pnmtrem is proposed to fit the model. PNMTREM is applied to data collected through Iowa Youth and Families Project (IYFP). Five different models, including univariate and multivariate ones, are considered to forecast multivariate longitudinal binary data. A comparative simulation study, which includes a model-independent data simulation process, is considered for this purpose. Forecasting independent variables are taken into account as well. To assess the forecasts, several accuracy measures, such as expected proportion of correct prediction (ePCP), area under the receiver operating characteristic (AUROC) curve, mean absolute scaled error (MASE) are considered. Mother' / s Stress and Children' / s Morbidity (MSCM) data are used to illustrate this comparison in real life. Results show that marginalized models yield better forecasting results compared to marginal models. Simulation results are in agreement with these results as well.
|
24 |
Investigating interatomic solid state potentials using Crystal-GRID: a study of applicability; DissertationHauschild, Timo 31 March 2010 (has links) (PDF)
Dissertation
|
25 |
On Intraclass Correlation CoefficientsYu, Jianhui 17 July 2009 (has links)
This paper uses Maximum likelihood estimation method to estimate the common correlation coefficients for multivariate datasets. We discuss a graphical tool, Q-Q plot, to test equality of the common intraclass correlation coefficients. Kolmogorov-Smirnov test and Cramér-von Mises test are used to check if the intraclass correlation coefficients are the same among populations. Bootstrap and empirical likelihood methods are applied to construct the confidence interval of the common intraclass correlation coefficients.
|
26 |
<原著>共通被験者デザインにおける等化係数の周辺最尤法による推定野口, 裕之, NOGUCHI, Hiroyuki G. 25 December 1990 (has links)
国立情報学研究所で電子化したコンテンツを使用している。
|
27 |
Gaussian copula modelling for integer-valued time seriesLennon, Hannah January 2016 (has links)
This thesis is concerned with the modelling of integer-valued time series. The data naturally occurs in various areas whenever a number of events are observed over time. The model considered in this study consists of a Gaussian copula with autoregressive-moving average (ARMA) dependence and discrete margins that can be specified, unspecified, with or without covariates. It can be interpreted as a 'digitised' ARMA model. An ARMA model is used for the latent process so that well-established methods in time series analysis can be used. Still the computation of the log-likelihood poses many problems because it is the sum of 2^N terms involving the Gaussian cumulative distribution function when N is the length of the time series. We consider an Monte Carlo Expectation-Maximisation (MCEM) algorithm for the maximum likelihood estimation of the model which works well for small to moderate N. Then an Approximate Bayesian Computation (ABC) method is developed to take advantage of the fact that data can be simulated easily from an ARMA model and digitised. A spectral comparison method is used in the rejection-acceptance step. This is shown to work well for large N. Finally we write the model in an R-vine copula representation and use a sequential algorithm for the computation of the log-likelihood. We evaluate the score and Hessian of the log-likelihood and give analytic solutions for the standard errors. The proposed methodologies are illustrated using simulation studies and highlight the advantages of incorporating classic ideas from time series analysis into modern methods of model fitting. For illustration we compare the three methods on US polio incidence data (Zeger, 1988) and we discuss their relative merits.
|
28 |
Estimação de maxima verossimilhança para processo de nascimento puro espaço-temporal com dados parcialmente observados / Maximum likelihood estimation for space-time pu birth process with missing dataGoto, Daniela Bento Fonsechi 09 October 2008 (has links)
Orientador: Nancy Lopes Garcia / Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Matematica, Estatistica e Computação Cientifica / Made available in DSpace on 2018-08-11T16:45:43Z (GMT). No. of bitstreams: 1
Goto_DanielaBentoFonsechi_M.pdf: 3513260 bytes, checksum: ff6f9e35005ad9015007d1f51ee722c1 (MD5)
Previous issue date: 2008 / Resumo: O objetivo desta dissertação é estudar estimação de máxima verossimilhança para processos de nascimento puro espacial para dois diferentes tipos de amostragem: a) quando há observação permanente em um intervalo [0, T]; b) quando o processo é observado após um tempo T fixo. No caso b) não se conhece o tempo de nascimento dos pontos, somente sua localização (dados faltantes). A função de verossimilhança pode ser escrita para o processo de nascimento puro não homogêneo em um conjunto compacto através do método da projeção descrito por Garcia and Kurtz (2008), como projeção da função de verossimilhança. A verossimilhança projetada pode ser interpretada como uma esperança e métodos de Monte Carlo podem ser utilizados para estimar os parâmetros. Resultados sobre convergência quase-certa e em distribuição são obtidos para a aproximação do estimador de máxima verossimilhança. Estudos de simulação mostram que as aproximações são adequadas. / Abstract: The goal of this work is to study the maximum likelihood estimation of a spatial pure birth process under two different sampling schemes: a) permanent observation in a fixed time interval [0, T]; b) observation of the process only after a fixed time T. Under scheme b) we don't know the birth times, we have a problem of missing variables. We can write the likelihood function for the nonhomogeneous pure birth process on a compact set through the method of projection described by Garcia and Kurtz (2008), as the projection of the likelihood function. The fact that the projected likelihood can be interpreted as an expectation suggests that Monte Carlo methods can be used to compute estimators. Results of convergence almost surely and in distribution are obtained for the aproximants to the maximum likelihood estimator. Simulation studies show that the approximants are appropriate. / Mestrado / Inferencia em Processos Estocasticos / Mestre em Estatística
|
29 |
Grid-Based RFID Indoor Localization Using Tag Read Count and Received Signal Strength MeasurementsJeevarathnam, Nanda Gopal 26 October 2017 (has links)
Passive ultra-high frequency (UHF) radio frequency identification (RFID) systems have gained immense popularity in recent years for their wide-scale industrial applications in inventory tracking and management. In this study, we explore the potential of passive RFID systems for indoor localization by developing a grid-based experimental framework using two standard and easily measurable performance metrics: received signal strength indicator (RSSI) and tag read count (TRC). We create scenarios imitating real life challenges such as placing metal objects and other RFID tags in two different read fields (symmetric and asymmetric) to analyze their impacts on location accuracy. We study the prediction potential of RSSI and TRC both independently and collaboratively. In the end, we demonstrate that both signal metrics can be used for localization with sufficient accuracy whereas the best performance is obtained when both metrics are used together for prediction on an artificial neural network especially for more challenging scenarios. Experimental results show an average error of as low as 0.286 (where consecutive grid distance is defined as unity) which satisfies the grid-based localization benchmark of less than 0.5.
|
30 |
Sensory Integration During Goal Directed Reaches: The Effects of Manipulating Target AvailabilityKhanafer, Sajida January 2012 (has links)
When using visual and proprioceptive information to plan a reach, it has been proposed that the brain combines these cues to estimate the object and/or limb’s location. Specifically, according to the maximum-likelihood estimation (MLE) model, more reliable sensory inputs are assigned a greater weight (Ernst & Banks, 2002). In this research we examined if the brain is able to adjust which sensory cue it weights the most. Specifically, we asked if the brain changes how it weights sensory information when the availability of a visual cue is manipulated. Twenty-four healthy subjects reached to visual (V), proprioceptive (P), or visual + proprioceptive (VP) targets under different visual delay conditions (e.g. on V and VP trials, the visual target was available for the entire reach, it was removed with the go-signal or it was removed 1, 2 or 5 seconds before the go-signal). Subjects completed 5 blocks of trials, with 90 trials per block. For 12 subjects, the visual delay was kept consistent within a block of trials, while for the other 12 subjects, different visual delays were intermixed within a block of trials. To establish which sensory cue subjects weighted the most, we compared endpoint positions achieved on V and P reaches to VP reaches. Results indicated that all subjects weighted sensory cues in accordance with the MLE model across all delay conditions and that these weights were similar regardless of the visual delay. Moreover, while errors increased with longer visual delays, there was no change in reaching variance. Thus, manipulating the visual environment was not enough to change subjects’ weighting strategy, further i
|
Page generated in 0.1218 seconds