Part 1 The viscosity of silicate melts is a fundamental physical property that determines the mobility and transport behaviour of magma on the surface and in planetary interiors. The viscosity of liquid fayalite (Fe2SiO4), the Fe-rich end-member of the abundant upper mantle mineral olivine, was determined up to 9.2 GPa and 1850 °C using in situ falling sphere viscometry and X-ray radiography imaging. The viscosity of liquid fayalite was found to decrease with pressure both along the melting curve and an isotherm, with temperature having very little influence on viscosity at high pressure. This work is the first to determine the viscosity of a highly depolymerized silicate melt at high pressure as only recent advances in experimental techniques have allowed the difficulties associated with studying depolymerized liquids at high pressure to be overcome. The results are in contrast with previous studies on moderately depolymerized silicate melts such as diopside and peridotite which found viscosity to initially increase with pressure. In accordance with recent in situ structural measurements on liquid fayalite, the viscosity decrease is likely a result of the increase in Fe-O coordination with pressure. The results show that the behaviour of silicate melts at depth is strongly dependent on the melt structure and composition. Part 2 The magnitude of the thermal anomaly at hotspot locations has a fundamental influence on the dynamics of mantle melting and therefore has an important role in shaping the surface of our planet. The North Atlantic Igneous Province (NAIP) is the surface expression of a major mantle plume and is unique in the fact that it has a complete magmatic history. The highest 3He/4He volcanic rocks on Earth are found in the early NAIP picrites of West Greenland and Bafin Island and high 3He/4He rocks are still erupted on Iceland today. However, the relationship between 3He/4He and mantle plumes has remained enigmatic. The main aim of this work is to use the ideal opportunity provided by the NAIP to investigate the relationship between temperature, mantle melting dynamics and helium isotopes within a mantle plume. The magmatic temperatures of a suite of picrites and primitive basalts spanning the spatial and temporal range of the NAIP was determined using traditional olivine-melt thermometry, a forward mantle melting model and the newly developed Al-in-olivine thermometer. This study is the first to provide a detailed petrologic approach to investigating the mantle temperature of the NAIP throughout its magmatic history and is the first to compare all three techniques in detail. The Al-in-olivine thermometer was found to be the most robust proxy for mantle temperature. The early stage of volcanic activity in the NAIP is associated with the arrival of the ancestral Iceland plume head and resulted in a uniform temperature anomaly with Al-in-olivine temperatures 250-300° above that of ambient MORB across an area 2000 km in diameter. In addition, the temperature of the plume is shown to have been subject to large temperature fluctuations on a timescale of 107 years and is currently increasing, which has had profound effects on the melting dynamics and bathymetry of the North Atlantic region. Using existing and new 3He/4He measurements, no clear relationship between 3He/4He and temperature is observable. However, it is noted that the maximum 3He/4He of primitive basalts from the NAIP has decreased through time. These relationships are explicable if the high 3He/4He reservoir is located in either the core or the core-mantle boundary (CMB), from which helium diffuses into the lower mantle. The high 3He=4He signature is incorporated into a plume when it breaks away from the base of the mantle and over the lifetime of the plume, the 3He/4He source is gradually depleted. The temperature of the plume can vary independently in responses to heat flow at the CMB, which is in turn related to changes in mantle convection. Global plate tectonics and mantle processes are therefore intricately linked with melting dynamics at hotspot locations.

No description available.

Yes / Thermal stability is of major importance in polymer extrusion, where product quality is dependent upon the level of melt homogeneity achieved by the extruder screw. Extrusion is an energy intensive process and optimisation of process energy usage while maintaining melt stability is necessary in order to produce good quality product at low unit cost. Optimisation of process energy usage is timely as world energy prices have increased rapidly over the last few years. In the first part of this study, a general discussion was made on the efficiency of an extruder. Then, an attempt was made to explore correlations between melt thermal stability and energy demand in polymer extrusion under different process settings and screw geometries. A commodity grade of polystyrene was extruded using a highly instrumented single screw extruder, equipped with energy consumption and melt temperature field measurement. Moreover, the melt viscosity of the experimental material was observed by using an off-line rheometer. Results showed that specific energy demand of the extruder (i.e. energy for processing of unit mass of polymer) decreased with increasing throughput whilst fluctuation in energy demand also reduced. However, the relationship between melt temperature and extruder throughput was found to be complex, with temperature varying with radial position across the melt flow. Moreover, the melt thermal stability deteriorated as throughput was increased, meaning that a greater efficiency was achieved at the detriment of melt consistency. Extruder screw design also had a significant effect on the relationship between energy consumption and melt consistency. Overall, the relationship between the process energy demand and thermal stability seemed to be negatively correlated and also it was shown to be highly complex in nature. Moreover, the level of process understanding achieved here can help to inform selection of equipment and setting of operating conditions to optimise both energy and thermal efficiencies in parallel. / This work was funded through an inter-disciplinary research programme (Grant No. EP/G059330/1) by the EPSRC-UK. The technical assistance provided by Ken Howell, Roy Dixon and John Wyborn is greatly appreciated.