New materials can be fabricated using small scaled building blocks as a repetition unit. Nanoparticles with their unique size-tuneable properties from quantum confinement can especially be utilised to form two- and three-dimensional ordered assemblies to introduce them into what would normally be considered to be incompatible matrices. Furthermore, new collective properties that derive from the ordered arrangement of the building blocks, are accomplished. Additionally, different materials can be combined by mixing different building blocks during self-assembly, so that size ranges and material combinations that are difficult to achieve by other means can be formed. The arrangement of small particles into highly ordered arrangements can be realised via self-assembly. To achieve such assemblies, highly monodisperse nanoparticular building blocks with a size distribution below 5 % have to be synthesised. The production and variation in the size of both lead chalcogenide and noble metal nanoparticles is presented in this work. Moreover, the syntheses of multicomponential nanoparticles (PbSe/PbS and Au/PbS) are investigated. Non-classical crystallisation methodologies with their varyious self-assembly mechanisms are used for the formation of highly symmetrical mesocrystals and supracrystals. Analogous to classical crystallisation methods and their formation processes the interparticle interactions, attractive as well as repulsive, determine the resulting crystalline structure. Variation of the environmental parameters consequently leads to structural variation due to the changing interparticle interactions. In contrast to classical crystallisation the length scale of the interparticle forces stays constant as the size dimension of the self-assembled building unit is changed. Two different non-classical crystallisation pathways are investigated in this work. One pathway focuses on the slow destabilisation of nanoparticles in organic media by the addition of a non-solvent. In this approach optimisation of parameters for the formation of highly symmetrical three-dimensional mesostructures are studied. Furthermore, to shine some light onto the mechanism of self-assembly, the intrinsic arrangement of the building units in a mesocrystal and the steps of non-solvent addition are analysed. The mechanistic investigations explain the differences observed in mesocrystal formation between metal and semiconductor nanoparticles. The lower homogeneity of the building units of the metal nanoparticles leads to smaller and less defined superstructures in comparison to semiconductor building blocks. Another pathway of non-classical crystallisation is the usage of electrostatic interactions as the driving force for self-assembly and supracrystal formation. Therefore, the building blocks are transferred into aqueous media and stabilised with oppositely charged ligands. The well-know procedure for metal nanoparticles was adapted for semiconductor materials. The lower stability of these nanoparticles in aqueous solution induces an agglomeration of the semiconductor nanoparticles without including oppositely charged metal nanoparticles. The destabilisation effect can be increased by the addition of equally charged metal nanoparticles in a salting out type process. In comparison to the slow formation of mesocrystals achieved via destabilisation in an organic media (up to 4 weeks), the salting out procedure takes place within two hours, but the faster agglomeration causes a less well defined assembly of the building units in the mesocrystals. Moreover, the arrangement of semiconductor nanoparticles with organic molecules such as polymers and proteins was investigated in order to use the nanoparticles as a light harvesting component. In combination with the directly bound polymer the charge carrier may be directly transferred to the conductive thiophene-based polymer, so that infrared light can be transformed into an electrical signal for use in further applications such as solar cells. The advantage of the nanoparticle-protein system is the self-assembly across a liquid-liquid interface and additionally a Förster resonance energy transfer can occur at this phase boundary. Hence, it is possible to transfer highly energetic photons directly to biological samples without destroying the biological material.

New materials can be fabricated using small scaled building blocks as a repetition unit. Nanoparticles with their unique size-tuneable properties from quantum confinement can especially be utilised to form two- and three-dimensional ordered assemblies to introduce them into what would normally be considered to be incompatible matrices. Furthermore, new collective properties that derive from the ordered arrangement of the building blocks, are accomplished. Additionally, different materials can be combined by mixing different building blocks during self-assembly, so that size ranges and material combinations that are difficult to achieve by other means can be formed. The arrangement of small particles into highly ordered arrangements can be realised via self-assembly. To achieve such assemblies, highly monodisperse nanoparticular building blocks with a size distribution below 5 % have to be synthesised. The production and variation in the size of both lead chalcogenide and noble metal nanoparticles is presented in this work. Moreover, the syntheses of multicomponential nanoparticles (PbSe/PbS and Au/PbS) are investigated. Non-classical crystallisation methodologies with their varyious self-assembly mechanisms are used for the formation of highly symmetrical mesocrystals and supracrystals. Analogous to classical crystallisation methods and their formation processes the interparticle interactions, attractive as well as repulsive, determine the resulting crystalline structure. Variation of the environmental parameters consequently leads to structural variation due to the changing interparticle interactions. In contrast to classical crystallisation the length scale of the interparticle forces stays constant as the size dimension of the self-assembled building unit is changed. Two different non-classical crystallisation pathways are investigated in this work. One pathway focuses on the slow destabilisation of nanoparticles in organic media by the addition of a non-solvent. In this approach optimisation of parameters for the formation of highly symmetrical three-dimensional mesostructures are studied. Furthermore, to shine some light onto the mechanism of self-assembly, the intrinsic arrangement of the building units in a mesocrystal and the steps of non-solvent addition are analysed. The mechanistic investigations explain the differences observed in mesocrystal formation between metal and semiconductor nanoparticles. The lower homogeneity of the building units of the metal nanoparticles leads to smaller and less defined superstructures in comparison to semiconductor building blocks. Another pathway of non-classical crystallisation is the usage of electrostatic interactions as the driving force for self-assembly and supracrystal formation. Therefore, the building blocks are transferred into aqueous media and stabilised with oppositely charged ligands. The well-know procedure for metal nanoparticles was adapted for semiconductor materials. The lower stability of these nanoparticles in aqueous solution induces an agglomeration of the semiconductor nanoparticles without including oppositely charged metal nanoparticles. The destabilisation effect can be increased by the addition of equally charged metal nanoparticles in a salting out type process. In comparison to the slow formation of mesocrystals achieved via destabilisation in an organic media (up to 4 weeks), the salting out procedure takes place within two hours, but the faster agglomeration causes a less well defined assembly of the building units in the mesocrystals. Moreover, the arrangement of semiconductor nanoparticles with organic molecules such as polymers and proteins was investigated in order to use the nanoparticles as a light harvesting component. In combination with the directly bound polymer the charge carrier may be directly transferred to the conductive thiophene-based polymer, so that infrared light can be transformed into an electrical signal for use in further applications such as solar cells. The advantage of the nanoparticle-protein system is the self-assembly across a liquid-liquid interface and additionally a Förster resonance energy transfer can occur at this phase boundary. Hence, it is possible to transfer highly energetic photons directly to biological samples without destroying the biological material.

Conventional energy sources are diminishing and non-renewable, take million years to form and cause environmental degradation. In the 21st century, we have to aim at achieving sustainable, environmentally friendly and cheap energy supply by employing renewable energy technologies associated with portable energy storage devices. Lithium-ion batteries can repeatedly generate clean energy from stored materials and convert reversely electric into chemical energy. The performance of lithium-ion batteries depends intimately on the properties of their materials. Presently used battery electrodes are expensive to be produced; they offer limited energy storage possibility and are unsafe to be used in larger dimensions restraining the diversity of application, especially in hybrid electric vehicles (HEVs) and electric vehicles (EVs). This thesis presents a major progress in the development of LiFePO4 as a cathode material for lithium-ion batteries. Using simple procedure, a completely novel morphology has been synthesized (mesocrystals of LiFePO4) and excellent electrochemical behavior was recorded (nanostructured LiFePO4). The newly developed reactions for synthesis of LiFePO4 are single-step processes and are taking place in an autoclave at significantly lower temperature (200 deg. C) compared to the conventional solid-state method (multi-step and up to 800 deg. C). The use of inexpensive environmentally benign precursors offers a green manufacturing approach for a large scale production. These newly developed experimental procedures can also be extended to other phospho-olivine materials, such as LiCoPO4 and LiMnPO4. The material with the best electrochemical behavior (nanostructured LiFePO4 with carbon coating) was able to delive a stable 94% of the theoretically known capacity. / Konventionelle Energiequellen sind weder nachwachsend und daher nachhaltig nutzbar, noch weiterhin langfristig verfügbar. Sie benötigen Millionen von Jahren um gebildet zu werden und verursachen in ihrer Nutzung negative Umwelteinflüsse wie starke Treibhausgasemissionen. Im 21sten Jahrhundert ist es unser Ziel nachhaltige und umweltfreundliche, sowie möglichst preisgünstige Energiequellen zu erschließen und nutzen. Neuartige Technologien assoziiert mit transportablen Energiespeichersystemen spielen dabei in unserer mobilen Welt eine große Rolle. Li-Ionen Batterien sind in der Lage wiederholt Energie aus entsprechenden Prozessen nutzbar zu machen, indem sie reversibel chemische in elektrische Energie umwandeln. Die Leistung von Li-Ionen Batterien hängen sehr stark von den verwendeten Funktionsmaterialien ab. Aktuell verwendete Elektrodenmaterialien haben hohe Produktionskosten, verfügen über limitierte Energiespeichekapazitäten und sind teilweise gefährlich in der Nutzung für größere Bauteile. Dies beschränkt die Anwendungsmöglichkeiten der Technologie insbesondere im Gebiet der hybriden Fahrzeugantriebe. Die vorliegende Dissertation beschreibt bedeutende Fortschritte in der Entwicklung von LiFePO4 als Kathodenmaterial für Li-Ionen Batterien. Mithilfe einfacher Syntheseprozeduren konnten eine vollkommen neue Morphologie (mesokristallines LiFePo4) sowie ein nanostrukturiertes Material mit exzellenten elektrochemischen Eigenschaften hergestellt werden. Die neu entwickelten Verfahren zur Synthese von LiFePo4 sind einschrittig und bei signifikant niedrigeren Temperaturen im Vergleich zu konventionellen Methoden. Die Verwendung von preisgünstigen und umweltfreundlichen Ausgangsstoffen stellt einen grünen Herstellungsweg für die large scale Synthese dar. Mittels des neuen Synthesekonzepts konnte meso- und nanostrukturiertes LiFe PO4 generiert werden. Die Methode ist allerdings auch auf andere phospho-olivin Materialien (LiCoPO4, LiMnPO4) anwendbar. Batterietests der besten Materialien (nanostrukturiertes LiFePO4 mit Kohlenstoffnanobeschichtung) ergeben eine mögliche Energiespeicherung von 94%.