The development of highly selective and active, long-lasting, robust, low-cost and environmentally benign catalytic materials is the greatest challenge in the area of catalysis study. In this context, core-shell structures where the active sites are embedded inside the protecting shell have attracted a lot of researchers working in the field of catalysis owing to their enhanced physical and chemical properties suppress catalyst deactivation. Also, a new active site generated at the interface between the core and shell may increases the activity and efficiency of the catalyst in catalytic reactions especially for oxide shells that exhibit redox properties such as TiO2 and CeO2. Moreover, coating oxide layer over metal nanoparticles (NPs) can be designed to provide porosity (micropore/mesopore) that gives selectivity of the various reactants by the different gas diffusion rates. In this thesis, we will discuss the concept of catalyst stabilization against metal sintering by a core-shell system. In particular we will study the mechanistic of forming core-shell particles and the key parameters that can influence the properties and morphology of the Pt metal particle core and SiO2 shell (Pt@SiO2) using the reverse micro-emulsion method. The Pt@SiO2 core-shell catalysts were investigated for low-temperature CO oxidation reaction. The study was further extended to other catalytic applications by varying the composition of the core as well as the chemical nature of the shell material. The Pt NPs were embedded within another oxide matrix such as ZrO2 and TiO2 for CO oxidation reaction. These materials were studied in details to identify the factors governing the coating of the oxide around the metal NPs. Next, a more challenging system, namely, bimetallic Ni9Pt NPs embedded in TiO2 and ZrO2 matrix were investigated for dry reforming of methane reaction at high temperatures. The challenges of designing Ni9Pt@oxide core-shell structure with TiO2 and ZrO2 and their tolerance of the structure to the conditions of dry reforming of methane will be discussed.

Third phase formation is an undesirable phenomenon during the PUREX process, which is a continuous liquid-liquid extraction approach for the reprocessing of uranium and plutonium from spent nuclear fuel. When third phase formation occurs, the organic extraction solution splits into two layers. The light upper layer, which is commonly named the light organic phase, contains a lower concentration of metal ions, tri-n-butyl phosphate (TBP) and nitric acids but is rich in the organic diluent. The heavy lower layer, which is commonly named the third phase, contains high concentrations of metal ions, TBP and nitric acids. As the third phase contains high concentrations of the uranium and plutonium complexes it can thus cause processing and safety concerns. Therefore, a comprehensive understanding of the mechanism of third phase formation is needed so as to improve the PUREX flowsheet. To investigate third phase formation through molecular simulations, one should first obtain reliable molecular models. A refined model for TBP, which uses a new set of partial charges generated from our density functional theory calculations, was proposed in this study. To compare its performance with other available TBP models, molecular dynamics simulations were conducted to calculate the thermodynamic properties, transport properties and the microscopic structures of liquid TBP, TBP/water mixtures and TBP/n-alkane mixtures. To our knowledge, it is only TBP model that has been validated to show a good prediction of the microscopic structure of systems that consist of both hydrophobic and hydrophilic species. This thesis also presents evidence that the light-organic/third phase transition in the TBP/n-dodecane/HNO3/H2O systems, which is relevant to the PUREX process, is an unusual transition between two isotropic, bi-continuous micro-emulsion phases. The light-organic /third phase coexistence was first observed using Gibbs Ensemble Monte Carlo (GEMC) simulations and then validated through Gibbs free energy calculations. Snapshots from the simulations as well as the cluster analysis of the light organic and third phases reveal structures akin to bi-continuous micro-emulsion phases, where the polar species reside within a mesh whose surface consists of amphiphilic TBP molecules. The non-polar n-dodecane molecules are outside this mesh. The large-scale structural differences between the two phases lie solely in the dimensions of the mesh. To our knowledge, the observation of the light-organic/third phase coexistence through simulation approaches and a phase transition of this nature have not previously been reported. Finally, this thesis presents evidence that the microscopic structure of the light organic phase of the Zr(IV)/TBP/n-octane/HNO3/H2O system, which is also related to the PUREX process, is different from that of the common hypothesis, where such system is consisted of large ellipsoidal reverse micelles. Snapshots from simulations, hydrogen bonding analysis and cluster analysis showed that the Zr4+, nitrate, TBP and H2O form extended aggregated networks. Thus, as above, we observe a bi-continuous structure but this time with embedded local clusters centred around the Zr4+ ions. The local clusters were found to consist primarily of Zr(NO3)4·3TBP complexes. This finding provides a new view of the structure of the Zr(IV)/TBP/n-octane/HNO3/H2O system.

La nécessité de délivrer des médicaments directement dans les cellules est grandissante avec le développement des thérapies géniques. Les peptides pénétrants (Cell Penetrating Peptides : CPP) représentent une possibilité pour administrer ces médicaments dans les cellules sans effet délétère sur la membrane. Ce sont des peptides d’une dizaine d’acides aminés, généralement cationiques. Ils sont capables de traverser la membrane cellulaire, et conservent cette propriété lorsqu’une cargaison leur est attachée. Cependant, leurs mécanismes d’entrée ne sont toujours pas tous connus. Nous avons caractérisé quelques aspects des mécanismes permettant aux CPP de traverser directement la membrane plasmique à l’aide de trois techniques biophysiques. i) Nous avons ainsi pu mettre en évidence le rôle des sulfates d’héparane comme partenaire d’adhésion forte du CPP pénétratine, à l’aide d’un outil de mesure de force : le Biomembrane Force Probe. ii) Nous avons montré la possibilité pour la pénétratine de franchir la bicouche lipidique (sans mécanisme cellulaire actif) si celle-ci est suffisamment riche en lipides chargés négativement. Ce passage a été étudié sur bicouches modèles, formées à l’interface entre gouttelettes obtenues par émulsion inverse dans de l’huile en présence de lipides. iii) Pour visualiser la translocation de CPP à l’échelle de la molécule unique nous avons développé un montage original de microscopie à onde évanescente sur bicouche suspendue. / Gene therapy relies on an efficient and specific delivery of drugs into targeted cells. For this purpose, the use of carriers that will help the drugs to cross the membrane, without introducing deleterious effect due to the membrane disruption, are promising. A family of such carriers is known as Cell Penetrating Peptides (CPPs). These peptides are short, about ten amino acids, and often cationic. They are able to translocate through the membrane with different cargos and deliver them into the cytosol. However the mechanisms are still, to a great extent, unknown. We used three biophysical techniques to gain insights into the mechanisms leading to the translocation of a CPP. i) We found the heparan sulfates to be the strongest partner of the CPP penetratin at the cell surface. This adhesion has been pointed out using the Biomembrane Force Probe, a force measuring tool. ii) We evidenced the translocation of penetratin through the lipid bilayer (without any cell mechanism) as long as it contains enough negatively charged lipids. This has been carried out using model bilayers formed at the interface between droplets generated by an inverted emulsion: water in an oil and lipid mixture. iii) To view the translocation of CPPs at the single molecule level we developed a total internal reflection fluorescence microscope (TIRFM) on a suspended bilayer.

No description available.