No description available.

Piezoelectric effect was discovered in the 19th century, but the applications of piezoelectric effect were realized until the 20th century. In this paper, piezoelectric actuators, which are made based on piezoelectric effect, are employed to establish a three-degree-of-freedom micro-manipulator. The mechanism of this micro-manipulator is designed as a parallel-type mechanism. The kinematics of the micro-manipulator is also analyzed. In addition, a remote control framework is implemented with a control system and this achievement can be a demonstration for future feasibility of application of this micro-manipulator to robotic systems.

The use of high-precision automated equipment is steadily increasing due in part to the progressively smaller sizes of electronic circuits. Currently, piezoelectric transducers (piezos) dominate as the actuation device for high precision machines, but shape memory alloys (SMA) may be a viable alternative to reduce monetary costs. This work explores the implementation of a low-cost linear macro-micro positioning system. The system consists of a modified printer carriage to provide long range, macro scale linear motion (approximately 200 mm range and 200 µm precision) and a micro scale system (approximately 4 mm range and 5 µm target precision) that uses an SMA actuator. A detailed description of the design and implementation of the system is given in this research. A model of the macro-stage is then generated by first identifying and inverting a simple friction model to linearize the system, thereby allowing for modified least squares (MLS) identification of a linear model. Various controllers are attempted for the macro-stage and compared with an experimentally tuned nonlinear PD controller that is implemented in the final design. A model of the micro-stage is derived through analysis of the SMA actuator. The model for the actuator is separated into two portions, an electro-thermal model, and a hysteresis model. The hysteresis model is derived using the Preisach model, and the electro-thermal model through MLS identification. To control the micro-stage, a PI controller with antiwindup is developed experimentally. The two stages are then executed together in closed loop and the resulting coupling between the two stages is briefly examined. Experimental data used for the modelling and design is presented, along with results of the final macro-micro linear positioning system.

The use of high-precision automated equipment is steadily increasing due in part to the progressively smaller sizes of electronic circuits. Currently, piezoelectric transducers (piezos) dominate as the actuation device for high precision machines, but shape memory alloys (SMA) may be a viable alternative to reduce monetary costs. This work explores the implementation of a low-cost linear macro-micro positioning system. The system consists of a modified printer carriage to provide long range, macro scale linear motion (approximately 200 mm range and 200 µm precision) and a micro scale system (approximately 4 mm range and 5 µm target precision) that uses an SMA actuator. A detailed description of the design and implementation of the system is given in this research. A model of the macro-stage is then generated by first identifying and inverting a simple friction model to linearize the system, thereby allowing for modified least squares (MLS) identification of a linear model. Various controllers are attempted for the macro-stage and compared with an experimentally tuned nonlinear PD controller that is implemented in the final design. A model of the micro-stage is derived through analysis of the SMA actuator. The model for the actuator is separated into two portions, an electro-thermal model, and a hysteresis model. The hysteresis model is derived using the Preisach model, and the electro-thermal model through MLS identification. To control the micro-stage, a PI controller with antiwindup is developed experimentally. The two stages are then executed together in closed loop and the resulting coupling between the two stages is briefly examined. Experimental data used for the modelling and design is presented, along with results of the final macro-micro linear positioning system.

In this work the interactions between neighboring superconducting thin film and ferromagnetic structures, i.e. superconductor-ferromagnet hybrid systems, were studied. A type-II superconducting thin film (Pb82Bi12), was deposited in close proximity to various ferromagnetic structures. These magnetic structures include: (i) alternating iron-brass shims of 275 mu m period, (ii) an array of 4 mu m wide Co stripes with smaller period (9 mu m), (iii) a square array of 50nm diameter, high aspect ratio (5-7) Ni rods with 250nm period. Measurements of critical transport current (IC), resistance (RH(T)) and second critical field (HC2) are reported. A variety of novel effects (enhancement of (IC) and (HC2), matching field effect, field compensation effect, and large hysteresis) are also reported. Using measurements on thin superconducting films atop a Co stripe array with a 9 mu m period, a superconductor-ferromagnet hybrid device (a mechanical superconducting persistent switch) is proposed. In addition, scanning Hall probe microscopy (SHPM) and other imaging techniques were used to characterize the magnetic properties of the systems mentioned. The SHPM was also used to acquire B-H and M-H curves. An additional sharp magnetic needle and electromagnetic coil assembly intended for micromanipulation of small magnetic particles and individual cells was also characterized.