No description available.

Over the past few years, the Utah Department of Transportation (UDOT) has developed a system called the Signal Performance Metrics System (SPMS) to evaluate the performance of signalized intersections. This system currently provides data summaries for several performance measures including: 1) Purdue Coordination Diagram, 2) Speed, 3) Approach Volume, 4) Purdue Phase Termination Charts, 5) Split Monitor, 6) Turning Movement Volume Counts, 7) Arrivals on Red, and 8) Approach Delay. There is a need to know the accuracy of the data that are being collected by the Wavetronix SmartSensor Matrix and displayed in the SPMS. The TAC members determined that the following factors would affect the accuracy of radar-based traffic sensors the most: sensor position, number of approach lanes, and volume level. The speed limit factor was added to the study after most of the data collection was completed. The purpose of this research was to collect data at various intersections to determine the accuracy of the data collected by the Wavetronix SmartSensor Matrix.A Mixed Model Analysis of Variance (ANOVA) was employed to analyze the effects that each factor had on the accuracy of the traffic volume count. A total of 14 tests were performed to examine the effects of the factors on traffic volume count accuracy. The sensor position factor was not found to be a statistically significant factor affecting the accuracy of traffic volume counts. The effect of speed limit on traffic volume count accuracy was determined to be inconclusive due to the lack of samples to be tested. The remaining two factors, volume level and number of approach lanes, were found to have a statistically significant effect on the accuracy of traffic volume counts. Based on these two factors, a matrix was created to meet the needs of UDOT to present accuracy values on the SPMS website. This matrix includes the mean, 95 percent confidence interval of the mean, standard deviation, number of samples, and the minimum number of samples needed.