A numerical study aimed at probabilistically assessing the coastal hazard posed by tsunamis induced by one-dimensional submarine rigid landslides that experience translational failure is presented. The numerical model here utilized is the finite-difference recreation of a linear, fully dispersive mild-slope equation model for wave generation and propagation. This recreated model has the capability to simulate submarine landslides that detach into multiple rigid pieces as failure occurs. An ad-hoc formulation describing the combined space-time coherency of the landslide is presented. Monte Carlo simulations are employed, with an emphasis on the shoreward-traveling waves, to construct probability of exceedance curves for the maximum dimensionless wave height from which wave statistics can be extracted. As inputs to the model, eight dimensionless parameters are specified both deterministically in the form of parameter spaces and probabilistically with normal distributions. Based on a sensitivity analysis, the results of this study indicate that submarine landslides with large width to thickness ratios and coherent failure behavior are most effective in generating tsunamis. Failures modes involving numerous slide pieces that fail in a very compact fashion, however, were observed to induce bigger waves than more coherent landslides. Rapid weakening in tsunami generation potential for some of the parameter combinations suggests that the hazard posed by submarine landslide tsunamis is strongly dependent on source features and local conditions and is only of concern for landslides of substantial dimensions.

Simulation models based on the elliptic mild or steep slope wave equation are frequently used to estimate wave properties needed for the engineering calculations of harbors. To increase the practical applicability of such models, a method is developed to include the effects of rubble mound structures that may be present along the sides of entrance channels into harbors. The results of this method are found to match those of other mathematical models (i.e. parabolic approximation & three-dimensional solution) under appropriate conditions, but they also deviate from results of parabolic approximations in some cases because dissipation can create angular scattering. Comparison with hydraulic model data also shows that this approach is useful for designing pocket wave absorbers that are used to reduce wave heights in entrance channels.