This final thesis concerns the new building of mixed-use building in Hořice. It has one floor partly below ground level and three floors above ground. There are garages for residential area, warehouse and boiler room in 1PP. There are offices and their base in the 1st and 2nd floor. There are 4 residental units in the 3rd floor. The building is designed in a shape of a rectangle. The roof is flat. There is the contact thermal insulation. There is designed gas boiler for heating. The supporting structure of the ceiling is monolithic concrete slab.

As a result of changes in the society, such as the increasing mobility, increasing spatial demandindgness of inhabitants and the onset of digital technologies, the architects and urbanists have been searching for new ways of urban housing developments. One of these ways is densification, i.e. an intensive use of the urban space. An intensive urban structure uses up the potential of a place to its maximum, solves several issues simultaneously and is a functional hybrid, the home of potential suburbanizers and a place of social contacts. It comes from the efforts to solve the particular issue of an over-populated, collapsing city. The aim of the thesis is to show contemporary approaches to the issue of intensive urban structures and to map out both the built and unbuilt projects. The thesis creates a system of their categorization and taxonomy. There is always a mixture of functions in play from the functional perspective. One can distinguish five categories according to the spacial conception. These categories are as follows: multiplicity, porousness, hybridity, connectivity and verticality. The public and semi-public spaces thus move to the higher levels of the city, into the city level, urban balcony or the hybrid landscape. The built projects usually tend to be impulses, in relation to the original city, to develop and revitalize the devastated city areas, brownfields, even urban sprawls. Based on the findings of this thesis, diploma and pre-diploma project assignments have been created at the architecture department at FAST VUT in Brno and the approaches to the issue have been tested in the pedagogical process. The survey in the second part of the thesis looks for the answer to the question of whether the potential inhabitants of an intensive urban structure exist, and who these people might be.

Diploma thesis focuses on the processing of detailed documentation for newly-built mixed-use building in Frýdek-Místek. The building has three above ground floors. On the first floor there is a restaurant with facilities. On the second and third floor there are office spaces. The building has combined support system, which is a reinforced concrete slab carried by masonry wall system of sand-lime blocks and reinforced concrete columns. The entire building is insulated using external contact thermal insulation system outside the first floor, which is designed ventilated facade with thermal insulation of mineral wool. The roof of the building is designed as a non-walkable flat single roof.

The final thesis is focused on the annex of complex of mixed-use buildings toward the church in Brno-Lisen. A pair of buildings consists of a one-storey Building a community of Salesians and two-storey building with parish office. The group of buildings is located on the southern slope in the housing estate of a block of flats from the 80s. Objects vertically copy a curve of the slope and is increasing to the dominant church building. Block of buildings are adjacent by shorter side to the church building and form a small enclosed courtyard inside. The buildings are designed at brick ceramic blocks, buildings are withnout cellar, with flat green roof. Living rooms are located on the southern facade, the north is reserved for corridors. The entrance to the courtyard is connected to the existing service road. Pedestrian approach builds on the existing surrounding landscaping.

Subject of this final thesis is to develop project documents of a new mixed-use building in Havířov. The building has three floors and basement car park. On the first floor there is a café and shops. On the second and third floor there are office spaces. Structural sytem of building is cast-in-place concrete frame. Exterior building envelope is made of sand-lime bricks with ventilated facade with thermal insulation of mineral wool insulation. The roof of the building is designed as a non-walkable warm flat roof.

Mixed-use building in Prostějov The aim of this master´s thesis is to elaborate the project documentation of a mixed-use building in Prostějov. The thesis consists of three parts: architectural-construction part, building services and elective part. The building has two above-ground floors. On the first floor there are storerooms, utility room, sanitary facilities and restaurant with kitchen and storerooms. The second floor is an office floor for one company which includes offices, dayroom, copyroom, meeting room and sanitary facilities. The building is founded on reinforced concrete foundation. The horizontal load-bearing and non-load-bearing structures are designed from ceramics blocks. The building is insulated by ETICS. The vertical load-bearing structures are designed from Spiroll slabs. The building has a green flat roof. There are parking spaces on the grounds. The building will be heated and cooled with a heat pump. It will also have an air condition. Part of electricity demand is covered by photovoltaics. In the third part of thesis, I replace frequently used materials with environmental ones in my project and compare them in terms of thermal engineering, acoustics and price. I used DEKSOFT, Hluk+, Autocad and Revit software. All structures comply with the valid standards and regulations.

The master thesis designs a mixed-use building in Ledeč nad Sázavou. The thesis consists of three parts. First part presents the project documentation of architectural-construction. Second part proposes the technical equipment of the building. Third part is assessment of the designed building by methodology for multicriteria evaluation of buildings SBToolCZ. The building is located in undeveloped and slightly sloping land. The building has three above-ground floors. There are three different operations in the building, which are a café and an electrical shop and an office part. There is a café, an electrical shop, technical and storage facilities on the first floor. The second and third floor is an office part and company apartment. Structurally, the building is solved by a two-wax load bearing system. The building is founded on footing and foundation slab. Load bearing vertical elements are walls, columns and posts. Externall wall is designed from ceramics block with and mineral insulation. Horizontal load-bearing structures are designed as cast-in-place reinforced slabs. The building has a flat roof. In the building is air condition and cooling system and heating. Part of electricity demand is covered by photovoltaics on the roof. All drawings and visualization are designes in software ArchiCAD.

The subject of the diploma thesis is a project documentation of a multifunctional building within the scope of the implementing documentation. The main goal of the thesis is the design of the layout, construction and material solution, completed by design of the fire safety solutions and assessment in terms of building physics. The multifunctional building has one underground floor and nine above-ground floors. In the basement there are technical facilities of the building and a parking area, in the 1st floor there are business premises, in one part of the 2nd floor there is a gym and the remaining areas are used for administrative purposes as well as the entire 3rd to 9th floor. The construction system is designed as a reinforced concrete monolithic skeleton, completed by a reinforced concrete core. Ceiling structures are monolithic reinforced concrete locally supported slabs. The building is founded on the concrete slab placed on drilled shafts. The main element of the outer wall is curtain walling, which is made from a mullion-transom system.

The aim of the urban – architectural study is to connect the historic city centre with the so far problematic and neglected areas along to the viaduct via rehabilitation and conversion of industrial buildings and filling up the city structure with new volumes in order to integrate the area within the organism of the city. Creative efforts are supported by analysis of post-industrial cityscape generally and its problems. The focus will be on sustainable principles, connectivity, eco-friendly transport and creating quality public spaces.

First of all, the work should point out the possibilities of activating the non-functioning post-industrial area. The aim is to remove the “wedge” into the center and to bring missing urban activities to the site. For this purpose, I suggest the completion of a city blocks with a housing function, a square with a food market, a city park, and a connection to the surrounding of industrial buildings. The aim is to integrate the site into the city through the completion and rehabilitation of industrial houses. The great creative challenge is to preserve the genius loci of this post-industrial landscape.