This study focuses on the effects of mixing temperature, binder content, and dust content on the performance of Stone Matrix Asphalt (SMA). Mixes produced at different mixing temperatures and with or without added polymer modified binder (Pb) and/or bag house dust (BHD) were evaluated. Two different types of specimens: laboratory mixed laboratory compacted, and plant mixed laboratory compacted were evaluated by Cantabro Mass Loss (CML) testing in an unaged condition or after a laboratory conditioning protocol (CP) was applied. Additional Pb and BHD were added to plant produced mixes in the laboratory before mixing. Results showed that mixing temperature affected behavior in some cases. Specimens with lower air void (Va) levels performed better than those with higher Va levels. Additional polymer modified binder and BHD, when added together, meaningfully improved mixture results in terms of CML values.

The subject of this thesis is the issue of reduction of the operating temperatures in the production and laying asphalt mixtures with a more specific focus on influencing the functional properties of these mixtures, especially low-temperature parameters. The thesis is notionally divided into two parts. The first part refers to the low-temperature asphalt mixtures and the second part pays the attention to asphalt mixtures with an added R-material. For production of asphalt mixtures in the first part of thesis were used five additives and for the second part were used a total of four different asphalt mixtures which differs in the participation of added R-material. Both parts are divided into a theoretical part, which discusses the existing experience, the use of these mixtures and the practical part, which analyses in detail the tested mixture ( the composition and preparation of tested specimens ) and deals with the result of laboratory test. In particular, it is a test of asphalt mixture resistance against the formation of frost cracks according to ČSN EN 12697-46 and by comparing the individual mixtures in comparison with the reference sample and among each other.