Continuous transportation demand growth in recent years has led to many traffic issues in urban areas. Among the most challenging ones are traffic congestion and the associated vehicular emissions. Efficient design of traffic signal control systems can be a promising approach to address these problems. This research develops a real-time signal control system, which optimizes signal timings at an under-saturated isolated intersection by minimizing total vehicular emissions. A combination of previously introduced analytical models based on traffic flow theory has been used. These models are able to estimate time spent per driving mode (i.e., time spent accelerating, decelerating, cruising, and idling) as a function of demand, vehicle arrival times, saturation flow, and signal control parameters. Information on vehicle activity is used along with the Vehicle Specific Power (VSP) model, which estimates emission rates per time spent in each operating mode to obtain total emissions per cycle. For the evaluation of the proposed method, data from two real-world intersections of Mesogion and Katechaki Avenues located in Athens, Greece and University and San Pablo Avenues, in Berkeley, CA has been used. The evaluation has been performed through both deterministic (i.e. under the assumption of perfect information for all inputs) and stochastic (i.e. without having perfect information for some inputs) arrival tests. The results of evaluation tests have shown that the proposed emission-based signal control system reduces emissions compared to traditional vehicle-based signal control system in most cases.

For Heavy-duty vehicles (HDVs), the distribution of vehicle miles traveled (VMT) by vehicle type is the most significant parameters for onroad mobile source emissions modeling used in the development of air quality management and regional transportation plans. There are two approaches for the development of the HDV VMT distribution; one approach uses HDV registration data and annual mileage accumulation rates, and another uses HDV VMT counts/observations collected with the FHWA truck classification. For the purpose of emissions modeling, the FHWA truck classes are converted to those used by the MOBILE6.2 emissions rate model by using either the EPA guidance or the National Research Council conversion factors. However, both these approaches have uncertainties in the development of onroad HDV VMT distributions that can lead to large unknowns in the modeled HDV emissions. This dissertation reports a new heavy-duty vehicle visual classification and activity estimation method that minimizes uncertainties in current HDV conversion methods and the vehicle registration based HDV VMT estimation guidance. The HDV visual classification scheme called the X-scheme, which classifies HDV/truck classes by vehicle physical characteristics (the number of axles, gross vehicle weight ratings, tractor-trailer configurations, etc.) converts FHWA truck classes into EPA HDV classes without losing the original resolution of HDV/truck activity and emission characteristics. The new HDV activity estimation method using publicly available HDV activity databases minimizes uncertainties in the vehicle registration based VMT estimation method suggested by EPA. The analysis of emissions impact with the new method indicates that emissions with the EPA HDV VMT estimation guidance are underestimated by 22.9% and 25.0% for oxides of nitrogen and fine particulate matter respectively within the 20-county Atlanta metropolitan area. Because the new heavy-duty vehicle visual classification and activity estimation method has the ability to provide accurate HDV activity and emissions estimates, this method has the potential to significantly influence policymaking processes in regional air quality management and transportation planning. In addition, the ability to estimate link-specific emissions benefits Federal and local agencies in the development of project (microscale), regional (mesoscale), and national (macroscale) level air quality management and transportation plans.