1 |
High speed energy efficient incoherent optical wireless communicationsTsonev, Dobroslav Antonov January 2015 (has links)
The growing demand for wireless communication capacity and the overutilisation of the conventional radio frequency (RF) spectrum have inspired research into using alternative spectrum regions for communication. Using optical wireless communications (OWC), for example, offers significant advantages over RF communication in terms of higher bandwidth, lower implementation costs and energy savings. In OWC systems, the information signal has to be real and non-negative. Therefore, modifications to the conventional communication algorithms are required. Multicarrier modulation schemes like orthogonal frequency division multiplexing (OFDM) promise to deliver a more efficient use of the communication capacity through adaptive bit and energy loading techniques. Three OFDM-based schemes – direct-current-biased OFDM (DCO-OFDM), asymmetrically clipped optical OFDM(ACO-OFDM), and pulse-amplitude modulated discrete multitone (PAM-DMT) – have been introduced in the literature. The current work investigates the recently introduced scheme subcarrier-index modulation OFDM as a potential energy-efficient modulation technique with reduced peak-to-average power ratio (PAPR) suitable for applications in OWC. A theoretical model for the analysis of SIM-OFDMin a linear additive white Gaussian noise (AWGN) channel is provided. A closed-form solution for the PAPR in SIM-OFDM is also proposed. Following the work on SIM-OFDM, a novel inherently unipolar modulation scheme, unipolar orthogonal frequency division multiplexing (U-OFDM), is proposed as an alternative to the existing similar schemes: ACO-OFDMand PAM-DMT. Furthermore, an enhanced U-OFDMsignal generation algorithm is introduced which allows the spectral efficiency gap between the inherently unipolar modulation schemes – U-OFDM, ACO-OFDM, PAM-DMT – and the conventionally used DCO-OFDM to be closed. This results in an OFDM-based modulation approach which is electrically and optically more efficient than any other OFDM-based technique proposed so far for intensity modulation and direct detection (IM/DD) communication systems. Non-linear distortion in the optical front-end elements is one of the major limitations for high-speed communication in OWC. This work presents a generalised approach for analysing nonlinear distortion in OFDM-based modulation schemes. The presented technique leads to a closed-form analytical solution for an arbitrary memoryless distortion of the information signal and has been proven to work for the majority of the known unipolar OFDM-based modulation techniques - DCO-OFDM, ACO-OFDM, PAM-DMT and U-OFDM. The high-speed communication capabilities of novel Gallium Nitride based μm-sized light emitting diodes (μLEDs) are investigated, and a record-setting result of 3.5Gb/s using a single 50-μm device is demonstrated. The capabilities of using such devices at practical transmission distances are also investigated, and a 1 Gb/s link using a single device is demonstrated at a distance of up to 10m. Furthermore, a proof-of-concept experiment is realised where a 50-μm LED is successfully modulated using U-OFDM and enhanced U-OFDM to achieve notable energy savings in comparison to DCO-OFDM.
|
2 |
Study of continuous-phase four-state modulation for cordless telecommunications : assessment by simulation of CP-QFSK as an alternative modulation scheme for TDMA digital cordless telecommunications systems operating in indoor applicationsBomhara, Mohamed A. January 2010 (has links)
One of the major driving elements behind the explosive boom in wireless revolution is the advances in the field of modulation which plays a fundamental role in any communication system, and especially in cellular radio systems. Hence, the elaborate choice of an efficient modulation scheme is of paramount importance in the design and employment of any communications system. Work presented in this thesis is an investigation (study) of the feasibility of whether multilevel FSK modulation scheme would provide a viable alternative modem that can be employed in TDMA cordless communications systems. In the thesis the design and performance analysis of a non-coherent multi-level modem that offers a great deal of bandwidth efficiency and hardware simplicity is studied in detail. Simulation results demonstrate that 2RC pre-modulation filter pulse shaping with a modulation index of 0.3, and pre-detection filter normalized equivalent noise bandwidth of 1.5 are optimum system parameter values. Results reported in chapter 5 signify that an adjacent channel rejection factor of around 40 dB has been achieved at channel spacing of 1.5 times the symbol rate while the DECT system standards stipulated a much lower rejection limit criterion (25-30dB), implying that CP-QFSK modulation out-performs the conventional GMSK as it causes significantly less ACI, thus it is more spectrally efficient in a multi-channel system. However, measured system performance in terms of BER indicates that this system does not coexist well with other interferers as at delay spreads between 100ns to 200ns, which are commonly encountered in such indoor environment, a severe degradation in system performance apparently caused by multi-path fading has been noticed, and there exists a noise floor of about 40 dB, i.e. high irreducible error rate of less than 5.10-3. Implementing MRC diversity combiner and BCH codec has brought in a good gain.
|
3 |
Study of continuous-phase four-state modulation for cordless telecommunications. Assessment by simulation of CP-QFSK as an alternative modulation scheme for TDMA digital cordless telecommunications systems operating in indoor applicationsBomhara, Mohamed A. January 2010 (has links)
One of the major driving elements behind the explosive boom in wireless revolution is the advances in the field of modulation which plays a fundamental role in any communication system, and especially in cellular radio systems. Hence, the elaborate choice of an efficient modulation scheme is of paramount importance in the design and employment of any communications system. Work presented in this thesis is an investigation (study) of the feasibility of whether multilevel FSK modulation scheme would provide a viable alternative modem that can be employed in TDMA cordless communications systems. In the thesis the design and performance analysis of a non-coherent multi-level modem that offers a great deal of bandwidth efficiency and hardware simplicity is studied in detail. Simulation results demonstrate that 2RC pre-modulation filter pulse shaping with a modulation index of 0.3, and pre-detection filter normalized equivalent noise bandwidth of 1.5 are optimum system parameter values. Results reported in chapter 5 signify that an adjacent channel rejection factor of around 40 dB has been achieved at channel spacing of 1.5 times the symbol rate while the DECT system standards stipulated a much lower rejection limit criterion (25-30dB), implying that CP-QFSK modulation out-performs the conventional GMSK as it causes significantly less ACI, thus it is more spectrally efficient in a multi-channel system. However, measured system performance in terms of BER indicates that this system does not coexist well with other interferers as at delay spreads between 100ns to 200ns, which are commonly encountered in such indoor environment, a severe degradation in system performance apparently caused by multi-path fading has been noticed, and there exists a noise floor of about 40 dB, i.e. high irreducible error rate of less than 5.10-3. Implementing MRC diversity combiner and BCH codec has brought in a good gain. / Higher Education Ministry
|
4 |
Algorithmes et architectures de récepteurs pour les systèmes multiporteuses par paquets d'ondelettes.Gautier, Matthieu 27 April 2006 (has links) (PDF)
L'objectif de cette étude est de répondre à la question de faisabilité de l'utilisation des ondelettes pour les modulations multiporteuses.<br />Par le biais du formalisme des ondelettes, il est possible de construire une base de fonctions orthogonales permettant de mettre au point un système de communication multiporteuses qui réduirai la sensibilité aux interférences introduites par le canal de propagation. Cette modulation multiporteuses est appelée DWMT (Discrete Wavelet MultiTone). Ses avantages et ses inconvénients sont développés en comparaison à la modulation multiporteuses mise en application actuellement : la modulation OFDM (Orthogonal Frequency Division Multiplexing).<br /><br /> La modulation DWMT est dans un premier temps évaluée dans un contexte de transmission en présence d'un brouilleur bande étroite. Cette modulation permet d'obtenir des formes d'ondes modulantes aux lobes secondaires très atténués et donc plus robustes à ce type d'interférences. Les résultats obtenus ont montré que la modulation DWMT est peu sensible aux interférences bande étroite. La transmission à travers un canal multi-trajets reste le scénario le plus important à traiter dans une étude d'un système de communication.<br /><br /> Dans ces conditions, c'est essentiellement l'utilisation d'un préfixe cyclique qui donne à la modulation OFDM des résultats intéressants en terme de taux d'erreur binaire. Lorsque le préfixe cyclique n'est pas une solution utilisée, la bonne localisation fréquentielle des formes d'ondes DWMT permet de réduire les interférences et les performances de la modulation DWMT sont légèrement supérieures à celles de la modulation OFDM.
|
5 |
Novel feedback and signalling mechanisms for interference management and efficient modulationAbu-alhiga, Rami January 2010 (has links)
In order to meet the ever-growing demand for mobile data, a number of different technologies have been adopted by the fourth generation standardization bodies. These include multiple access schemes such as spatial division multiple access (SDMA), and efficient modulation techniques such as orthogonal frequency division multiplexing (OFDM)-based modulation. The specific objectives of this theses are to develop an effective feedback method for interference management in smart antenna SDMA systems and to design an efficient OFDM-based modulation technique, where an additional dimension is added to the conventional two-dimensional modulation techniques such as quadrature amplitude modulation (QAM). In SDMA time division duplex (TDD) systems, where channel reciprocity is maintained, uplink (UL) channel sounding method is considered as one of the most promising feedback methods due to its bandwidth and delay efficiency. Conventional channel sounding (CCS) only conveys the channel state information (CSI) of each active user to the base station (BS). Due to the limitation in system performance because of co-channel interference (CCI) from adjacent cells in interference-limited scenarios, CSI is only a suboptimal metric for multiuser spatial multiplexing optimization. The first major contribution of this theses is a novel interference feedback method proposed to provide the BS with implicit knowledge about the interference level received by each mobile station (MS). More specifically, it is proposed to weight the conventional channel sounding pilots by the level of the experienced interference at the user’s side. Interference-weighted channel sounding (IWCS) acts as a spectrally efficient feedback technique that provides the BS with implicit knowledge about CCI experienced by each MS, and significantly improves the downlink (DL) sum capacity for both greedy and fair scheduling policies. For the sake of completeness, a novel procedure is developed to make the IWCS pilots usable for UL optimization. It is proposed to divide the optimization metric obtained from the IWCS pilots by the interference experienced at the BS’s antennas. The resultant new metric, the channel gain divided by the multiplication of DL and UL interference, provides link-protection awareness and is used to optimize both UL and DL. Using maximum capacity scheduling criterion, the link-protection aware metric results in a gain in the median system sum capacity of 26.7% and 12.5% in DL and UL respectively compared to the case when conventional channel sounding techniques are used. Moreover, heuristic algorithm has been proposed in order to facilitate a practical optimization and to reduce the computational complexity. The second major contribution of this theses is an innovative transmission approach, referred to as subcarrier-index modulation (SIM), which is proposed to be integrated with OFDM. The key idea of SIM is to employ the subcarrier-index to convey information to the receiver. Furthermore, a closed-form analytical bit error ratio (BER) of SIM OFDM in Rayleigh channel is derived. Simulation results show BER performance gain of 4 dB over 4-QAM OFDM for both coded and uncoded data without power saving policy. Alternatively, power saving policy maintains an average gain of 1 dB while only using half OFDM symbol transmit power.
|
6 |
Estimation de canal radio-mobile à évolution rapide dans les systèmes à modulation OFMDHijazi, Hussein 25 November 2008 (has links) (PDF)
Cette thèse s'inscrit dans le cadre des systèmes radiocommunications numériques pour des récepteurs mobiles basés sur la modulation multi-porteuse OFDM. L'objectif est de proposer des algorithmes d'estimation de canal et de suppression d'IEP pour les <br />récepteurs OFDM à grande mobilité en liaison descendante. Notre démarche est d'estimer les paramètres de propagation du canal physique tels que les retards et les variations temporelles des gains complexes du canal à trajet multiples, au lieu du canal discret équivalent. Nous avons développé une approximation à base de polynôme pour l'évolution des gains complexes d'un canal multi-trajet de type Rayleigh avec un spectre de Jakes. En se basant sur cette modélisation polynomiale, nous avons présenté une étude théorique sur les Bornes de Cramér-Rao Bayésiennes (BCRBs) pour l'estimation des gains complexes du canal, en supposant les délais des trajets connus. Enfin, nous avons développé et analysé trois algorithmes itératifs d'estimation des variations temporelles des gains complexes (à l'intérieur d'un symbole OFDM) et de suppression d'IEP pour des récepteurs à grande mobilité. Les deux premiers sont basés sur l'interpolation (passe-bas ou polynomiale) des valeurs moyennes estimées et sur un égaliseur SSI. Ils ont montré de bonnes performances pour des récepteurs à vitesses modérées (i.e., fd.T <= 0.1). Le troisième algorithme est basé sur une modélisation AR et un filtre de Kalman pour estimer les coefficients polynomiaux des gains complexes, et sur un égaliseur QR. Il a fait preuve de bonnes performances pour des récepteurs à vitesses très élevées (i.e. , fd.T> 0.1).
|
7 |
Les codes à métrique de rang et leurs applications dans les réseaux Smart Grid / Rank metric codes and their applications in Smart Grid networksYazbek, Abdul Karim 05 December 2017 (has links)
Cette thèse a pour cadre les transmissions sur les réseaux CPL-BE et les réseaux de capteurs à faible capacité. L'état de l'art classique sur la protection de l'information dans la transmission par réseaux de capteurs fait référence à l'utilisation de codage distribué où les relais implémentent des opérations de parité (mélange des flux) sur les data issues des capteurs. Cependant, il est difficile, de par la nature variable de la qualité des liens en liaisons sans fil, de contrôler la qualité du codeur équivalent construit et de maintenir ses performances au cours du temps. C'est pourquoi nous nous sommes orientés dans cette thèse vers la recherche de schémas de codage différents qui résistent mieux à la variation de qualité des liaisons à travers le réseau. Notre choix s'est porté sur le codage par sous-espace inspiré des travaux de Gabidulin. Le but est de former un code qui utilise une métrique simple et résistante pour sécuriser les transmissions sur le réseau. Les codes à métrique de rang répondent bien à ce besoin car il n'y a qu'à contrôler le rang de la matrice obtenue en réception pour vérifier l'intégrité de la transmission. Les codes à métrique de rang et leur algorithme de décodage ont été étudiés dans un premier temps. Puis, les performances du code LRPC proposé concaténé avec les codes convolutifs sont testées dans des schémas de transmission des contextes différents. / This thesis considers the context of transmissions on CPL-BE networks and low-capacity sensor networks. The state of the art on information protection intransmission by sensor networks refers to the use of distributed coding, where therelays implement parity operations (mixing of streams) on data transmitted by thesensors. However, due to the varying nature of the quality of the wireless links, it is difficult to control the quality of the equivalent encoder constructed and to maintain its performance over time. Therefore, in this thesis, we have focused on the search for different coding schemes that are better resist the variation in the quality of the links across the network. Our choice was based on the sub-space coding inspired by Gabidulin's work. The goal is to form a code that uses a simple and resistant metric to secure transmission across the network. Rank metric codes respond well to this need because it only has to control the rank of the matrix obtained in reception to verify the integrity of the transmission. The rank metric codes and their decoding algorithm were studied in a first step. Then, the performance of the proposed LRPC code concatenated with the convolutional codes is tested in transmission schemes of different contexts.
|
Page generated in 0.1073 seconds