Spelling suggestions: "subject:"moisture.using"" "subject:"moisturesensor""
1 |
Evaluation of commercially available moisture-sensing devices to monitor feather wetness2015 March 1900 (has links)
The ability to detect moisture in broiler feathers for five moisture-sensing devices using varying techniques, an infrared (IR) camera, and one type of moisture-sensitive paper was evaluated in two experiments; using artificial feather beds in laboratory settings and in field conditions using live birds. In the first experiment (lab testing-phase I), seven levels of moisture were applied once per day to the swatches with four different feather densities to account for moisture variation and feather density present in commercial barn conditions. True moisture of the feathers was determined gravimetrically on a daily basis. Using the five devices, 20 readings each were acquired from each of the swatches. The average temperatures of a selected area from images captured using an IR camera along with average device readings were compared with the true moisture content. Moisture-sensitive paper images were analyzed in Photoshop and Matlab prior to statistical analysis. Data from all devices, the IR camera, and moisture-sensitive paper were analyzed using SAS Procedure GLM to define relationships between the true moisture content and the readings. The devices were analyzed based on their accuracy, consistency and sensitivity using adjusted-R2, standard error, and regression slope, respectively. The data from all devices and techniques were significantly correlated with feather swatch moisture content (P<0.05). Results from the first experiment suggested potential to measure feather moisture by several of the tested devices. While feather density presented as a challenge during this experiment, it was not considered as a significant issue when evaluating the devices. The “Hay” and “Construction 1” sensors showed the most promise in detecting feather moisture and
iv
were selected for further testing using live birds. The two devices had relatively higher accuracy, consistency, and sensitivity compared to other devices and techniques.
The second experiment (field testing – phase II) evaluated the two selected devices (Hay and Construction 1 sensors) in various commercial broiler settings. Device readings were acquired from the back, wing, and breast feathers. A sample of back feathers from each bird was collected to determine the true moisture. Statistical analyses of data were the same as in experiment 1. Although the initial study, conducted within a lab setting, denoted a significant relationship between true moisture content and device readings, testing within the field environments showed the devices to perform poorly. Readings from both devices and for all the locations tested demonstrated a lack of sensitivity, accuracy, and consistency for measuring moisture in feathers of live birds.
|
2 |
Evaluation of capacitance moisture sensors for use in municipal solid wasteSchmidt, Patrick 03 March 2010
Current municipal solid waste (MSW) practices have encouraged rapid waste degradation (stabilization) as an alternative to past methods of isolating the waste from the surrounding environment. There are challenges to rapid-stabilization technology, in particular, the management of the in-situ MSW moisture content.<p>
The primary objective of this study was to evaluate the use of capacitance moisture probes for the purpose of measuring the moisture content within MSW. Capacitance moisture probes have not previously been used in MSW, however their use in agriculture is extensive and knowledge of their potential for monitoring MSW is limited.<p>
The specific objectives of this research were to: i) establish a laboratory based correlation between sensor data and volumetric moisture content in MSW, ii) establish a correlation between field-installed capacitance sensors and moisture content derived from continuous-depth in-situ sampling of MSW, and iii) demonstrate the ability of capturing advancing/receding moisture fronts with the field-installed capacitance sensors.<p>
Laboratory trials were conducted using hand-compacted MSW at volumetric moisture contents ranging from 15%-55% and a manual type of capacitance sensor. This series of laboratory trials successfully produced a correlation between sensor output and volumetric moisture content.<p>
To evaluate the sensors in a real-world application, two configurations of capacitance moisture probes were installed in the field: i) an in-place, continuous-time capacitance probe, and ii) a portable, continuous-depth at discrete time, capacitance probe.<p>
Field results indicated that capacitance moisture probes were able to capture the passing of both an artificially and naturally induced moisture front, though quantitative correlation between the in-situ moisture content of the sampled MSW and the readings of the sensors could not be achieved.<p>
The reasons for this were a combination of three factors:<p>
1. The introduction of void-space during sensor installation significantly reduced sensor output;<p>
2. Poor MSW sampling technique resulted in 57% recovery (causing the exact origin of samples to be unknown); and<p>
3. The sampling technique disturbed the MSW samples, resulting in incorrect volumetric moisture contents in the samples.
|
3 |
Evaluation of capacitance moisture sensors for use in municipal solid wasteSchmidt, Patrick 03 March 2010 (has links)
Current municipal solid waste (MSW) practices have encouraged rapid waste degradation (stabilization) as an alternative to past methods of isolating the waste from the surrounding environment. There are challenges to rapid-stabilization technology, in particular, the management of the in-situ MSW moisture content.<p>
The primary objective of this study was to evaluate the use of capacitance moisture probes for the purpose of measuring the moisture content within MSW. Capacitance moisture probes have not previously been used in MSW, however their use in agriculture is extensive and knowledge of their potential for monitoring MSW is limited.<p>
The specific objectives of this research were to: i) establish a laboratory based correlation between sensor data and volumetric moisture content in MSW, ii) establish a correlation between field-installed capacitance sensors and moisture content derived from continuous-depth in-situ sampling of MSW, and iii) demonstrate the ability of capturing advancing/receding moisture fronts with the field-installed capacitance sensors.<p>
Laboratory trials were conducted using hand-compacted MSW at volumetric moisture contents ranging from 15%-55% and a manual type of capacitance sensor. This series of laboratory trials successfully produced a correlation between sensor output and volumetric moisture content.<p>
To evaluate the sensors in a real-world application, two configurations of capacitance moisture probes were installed in the field: i) an in-place, continuous-time capacitance probe, and ii) a portable, continuous-depth at discrete time, capacitance probe.<p>
Field results indicated that capacitance moisture probes were able to capture the passing of both an artificially and naturally induced moisture front, though quantitative correlation between the in-situ moisture content of the sampled MSW and the readings of the sensors could not be achieved.<p>
The reasons for this were a combination of three factors:<p>
1. The introduction of void-space during sensor installation significantly reduced sensor output;<p>
2. Poor MSW sampling technique resulted in 57% recovery (causing the exact origin of samples to be unknown); and<p>
3. The sampling technique disturbed the MSW samples, resulting in incorrect volumetric moisture contents in the samples.
|
4 |
Unmanned ground vehicle system to collect soil moisture dataFlynt, Austin Edward 10 December 2021 (has links) (PDF)
With an increased interest in precision agriculture, it is important to identify efficient ways to monitor soil moisture. Soil moisture can be monitored using handheld sensors, but this method is laborious and time consuming. Remote methods, such as radar systems can be used as well, but these methods require ground truth data to verify their accuracy. It becomes clear that to collect this data regularly and reliably, a mobile robotic device is necessary. This thesis proposes to implement mobile robot take soil moisture measurements with less human effort than existing methods while maintaining the same accuracy. This soil moisture data collection system uses an unmanned ground vehicle (UGV) to take measurements with position data. This system uses an actuator inserted soil moisture probe, and a radio frequency identification (RFID) sensing system that uses buried moisture sensing tags. Field testing of both measurement systems showed that the actuator-based system worked reliably.
|
5 |
Polymers with Integrated Sensing CapabilitiesKunzelman, Jill Nicole 26 March 2009 (has links)
No description available.
|
Page generated in 0.0565 seconds