Thesis (M.S.)--Ohio State University, 2008. / Title from first page of PDF file. Includes bibliographical references (p. 116).

There is no abstract available for this thesis.

This creative project was undertaken to determine the effectiveness and possible usefulness of a small, laboratory sized plastic blow molder. The design of this machine was similar to those units used in industry but fabricated on a much smaller scale.The blow molder was of the vertical extrusion type. It was actuated by a hydraulic cylinder, and the plastic was melted by means of electric heating bands.The extruded plastic parison was formed by two matching mold halves, and air introduced through a needle valve to expand the hot plastic to the shape of the mold cavity.

This creative project involved an in-depth study of the transfer molding process and the engineering and fabrication procedures related to the development of a hand transfer mold. The investigator made a study of and constructed the equipment required for transfer molding a knife handle.The creative project outlines the compression molding process, describes the variations of the transfer molding process, and lists and compares the advantages and disadvantages of the compression and transfer molding processes. The creative project also suggests a series of operating instructions that may be used with the transfer mold.

This creative project involved the design and construction of a plastics blow molding machine for educational use. Many industrial machines were found which performed plastics blow molding but studies revealed that no equipment had been designed particularly for school use.This project covered all elements of the design of a plastics blow molding machine concluding with the construction of a working model. In this process a complete set of working drawings was developed as illustrated in this paper.The operation of the machine proved successful but with evidence that improvements could be made.

Thesis (M.S.)--University of Wisconsin--Madison, 1963. / Typescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaf 68).

Thesis (MTech (Mechanical Engineering))--Peninsula Technikon, Cape Town, 2004 / Most very large moulds are manufactured in Europe, especially in Germany and Italy. The main reason being that South Africa does not have enough very large size CNC machines on which these could be machined. A large size mould half can be split into two or more smaller parts for machining purposes and then reassembled later. In this way many large size moulds, especially rotational moulds can be manufactured on medium size CNC machines. Since the large component has been split into small parts, these can be distributed to different subcontractors to machine simultaneously, and thereby reducing the total manufacturing lead-time. The project then uses three case studies to advance the proposed concept for mould manufacture. A small size rotational mould for a model drum is manufactured to confirm that Pentech had both the infrastructure and required skill to make a rotational mould of any sort. Then a medium size rotational mould of a steering wheel is manufactured. This case study is the key and longest stage in this project; it consists of the full process of mould subdivision followed by full mould manufacture, some subcontracting of parts and lastly full product testing. Finally, a part of a large size mould was manufactured for purpose of investigating all aspects around the subcontracting ofmould parts. In the first case study the clamping strategy used through out as an integral part of the subdivision strategy is proven. The second case study using the medium size rotational mould successfully demonstrates the subdivision concept, along with its material savings. This second case study also introduces the idea of including CNC lathe parts. Lastly, the third case study using a large size rotational mould proves the contractibility of the mould segments using NC files, despite certain industry leaders believing that machine shops would not be interested in accepting work on the basis ofNC files

No description available.

Thesis (MTech (Mechanical Engineering))--Peninsula Technikon, 2003. / Word processed copy. Summary in English. Includes bibliographical references (leaves 60-63). Also available online.

Thesis (Ph. D.)--Hong Kong University of Science and Technology, 2004. / Includes bibliographical references (leaves 218-244). Also available in electronic version. Access restricted to campus users.