Master of Science / Department of Geology / Allen W. Archer / The Morrowan middle Bloyd sandstone of northwest Arkansas records a fluvial to estuarine transition in a drowned incised valley system. Lower portions of outcrops contain fluvially deposited, planar-tabular cross-stratified sandstone with a uni-directional southwest paleoflow. Intervals with dune scale, intricately interwoven trough cross-stratification with northeastern paleoflow is attributed to strong tidal and wave influence in the outer estuary. Upwards the middle Bloyd changes into a muddy mid-estuarine interval with heterolithic bedding and a bi-directional northeast-southwest paleoflow. Overlying this interval a marine sand about one meter in thickness can be found containing bryozoan and crinoid fossils. Overlying the middle Bloyd, the marine Dye Shale member of the Bloyd Formation marks the transition to a dominantly marine setting.

For the same reasons which prompted its ratification in 1990 as the Global Stratotype Section and Point for the Mid-Carboniferous boundary, namely, section completeness, abundant fossils, and excellent exposure, the Morrowan Arrow Canyon Bird Spring strata is recommended as a candidate standard sequence stratigraphic reference for the Morrowan portion of the Lower Absaroka I supersequence. The stratigraphic architecture of Morrowan strata in Arrow Canyon was largely controlled by high-amplitude (100-m), high-frequency sea-level changes. Outcrop data and facies stacking patterns define 59 fifth-order fundamental cycles. These fundamental cycles stack into ten third-order sequences with an average duration of 320 ka. Changes in both cycle thickness and fundamental cycle type indicate that the second-order sea-level curve of Golonka and Keissling for the Lower Absaroka Ia supersequence should be modified to reflect rising sea-level from the Mid-Carboniferous boundary with maximum flooding conditions ~120 to 135 meters above the Mid-Carboniferous boundary, followed by falling sea-level to ~6 meters below the Morrowan-Atokan boundary in Arrow Canyon. Additionally, cycle diagnostic conodonts and foraminifera permit correlation of selected third-order sequences to basins containing time-equivalent strata.

The Pennsylvanian Marble Falls Formation in the Llano Uplift region of the southern Fort Worth Basin (Central Texas) is a Morrowan-Atokan mixed carbonate-siliciclastic unit whose deposition was influenced by icehouse glacioeustatic sea-level fluctuations and foreland basin tectonics. Previous interpretations of the Marble Falls Formation focused on outcrop data at the fringes of the Llano Uplift. This study uses a series of 21 cores to create a facies architectural model, depositional environmental interpretation, and regional sequence stratigraphic framework. On the basis of core data, the study area is interpreted to have been deposited in a ramp setting with a shallower water upper ramp area to the south and a deeper water basin setting to the north. Analysis of cores and thin sections identified 14 inner ramp to basin facies. Dominant facies are: (1) burrowed sponge spicule packstone, (2) algal grain-dominated packstone to grainstone, (3) skeletal foraminiferal wackestone, and (4) argillaceous mudstone to clay shale. Facies stacking patterns were correlated and combined with chemostratigraphic data to improve interpretations of the unit’s depositional history and form an integrated regional model. The Marble Falls section was deposited during Pennsylvanian icehouse times in a part of the Fort Worth Basin with active horst and graben structures developing in response to the Ouachita Orogeny. The resulting depositional cycles reflect high-frequency sea-level fluctuations and are divided into 3 sequences. Sequence 1 represents aggradational ramp deposition truncated by a major glacioeustatic sea-level fall near the Morrowan-Atokan boundary (SB1). This fall shifted accommodation basinward and previously distal areas were sites of carbonate HST in Sequence 2 deposition following a short TST phase. Sequence 3 represents the final phase of carbonate accumulation that was diachronously drowned by Smithwick siliciclastics enhanced by horst and graben faulting. These findings contribute to our understanding of the depositional response to glacioeustatic sea-level changes during the Pennsylvanian and can also form the basis for constructing a sedimentological and facies analog for Morrowan to Atokan shallow- to deepwater carbonates in the Permian Basin and the northern Fort Worth Basin. / text

The Early Pennsylvanian (Bashkirian/Morrowan) Bridal Veil Limestone of north-central Utah was deposited in the eastern portion of the rapidly subsiding Oquirrh basin. The 420 meter-thick Bridal Veil Limestone displays distinct cyclicity formed by stacked, meter to decameter scale high-frequency sequences and their constituent parasequences. Though no one ideal cycle may be defined for the Bridal Veil Limestone, each high-frequency sequence and parasequence contains a general shallowing upward trend that ranges from anaerobic to dysaerobic mudstone at the base to skeletal wackestone to mud-dominated packstone, capped by heterozoan grain-rich carbonates or siliciclastic tidalites. Cycles bounded by exposure surfaces, indicated by micro-brecciation, rhizoliths, laminated calcite or silica crusts, rip-up clasts, centimeter-scale teepee structures, and/or pronounced erosional relief are termed high-frequency sequences. Those bounded by marine flooding surfaces are defined as parasequences. Thusly defined, the Bridal Veil Limestone is divided into 25 high-frequency sequences designated BVL-1 through BVL-25. Overall, two distinct sets of high-frequency sequences may be observed in the Bridal Veil Limestone. Sequences comprising the lower half of the formation (BVL-1 through BVL-12) are thicker, muddier, and less sand-prone than sequences in the upper half of the formation (BVL-13 through BVL-25), indicating an overall change in oxygenation, depositional texture, and accommodation upward in the section. Tracing of key beds and surfaces between the Thorpe Hills, Lake Mountain, and the Wasatch Range (spanning a distance greater than 50 miles) reveals that deposition was remarkably uniform across the southeastern part of the Oquirrh basin which we herein designate the Bridal Veil sub-basin and distinct from coeval formations in the southern Oquirrh basin, Ely basin, and Wyoming shelf. Mudstone and wackestone textures comprise a large portion of the formation by volume. Grain-rich carbonates are almost exclusively heterozoan in composition, indicating that the sub-basin was subphotic to aphotic through Early Pennsylvanian time.

The Black Prince Limestone of southeastern Arizona has been assigned to the Morrowan on the basis of several long-ranging fossils. Since these were not especially diagnostic, the exact time represented by the Black Prince within the Morrowan was uncertain. To date the Black Prince more precisely, six sections were systematically sampled for conodonts. The condonts found, especially Neognathodus bassleri, Rachistognathus muricatus, Idiognathoides convexus, and Spathoqnathodus coloradoensis, indicate a middle Morrowan to early Derryan age for the Black Prince in the study area. Four conodont zones can be recognized: the Neognathodus bassleri Zone, the Idiognathodus sinuosis.- Streptognathodus anteeccentricus Zone , the Idiognathoides convexus Zone, and the Spathognathodus coloradoensis-Neognathodus columbiensis Zone. These zones compare favorably with the zonation previously established in the type Morrowan. This biostratigraphic evidence suggests that the hiatus between the Black Prince and Horquilla Limestones increases in magnitude from southeastern to south-central Arizona. The Black Prince represents a sequence of tidal flat and shallow subtidal carbonate deposits. Mudstones and sparsely fossiliferous wackestones with low fossil diversity and abundance characterize the tidal-flat facies. Grainstones, packstones, and fossiliferous wackestones with high fossil diversity and abundance characterize the shallow subtidal facies.

The Bridal Veil Falls Limestone (lowest 400 meters of the Permo-Carboniferous Oquirrh Group) is well exposed on the flanks of Cascade Mountain (Wasatch Front and adjacent mountain ranges) near Provo, Utah. Because of its excellent exposure and location in the heart of the Oquirrh depocenter, this area was selected to develop a sequence stratigraphic framework for Morrowan rocks that may be applied throughout the Oquirrh basin (NW Utah and southern Idaho) as well as the adjacent Ely and Bird Springs troughs. Eleven partial to complete sections of the Bridal Veil Falls Limestone were measured along the west and north flanks of Cascade Mountain and the south end of Mt. Timpanogos. There the limestone is comprised principally of mud-rich carbonate lithofacies punctuated by thin, and sometimes discontinuous quartzose sandstone beds. The predominance of muddy to grain-rich heterozoan limestone microfacies suggests deposition on a west-dipping low energy carbonate ramp that prograded westward throughout Morrowan time. Sandstones reflect transport of siliciclastics from the incipient Weber shelf (located to the NE) during episodes of sea-level lowstand. The Bridal Veil Falls Limestone is subdivided into 21, third and fourth order depositional sequences ranging in thickness from 3 to 60 meters, and 62 parasequences. Parasequences are commonly asymmetrical, reflecting rapid flooding followed by protracted shoaling and/or sea level drop. Selected cycles are recognized in the Lake Mountains, Thorpe Hills, and the southern Oquirrh Mountains to the west of Cascade Mountain indicating that Parasequences delineated at Cascade Mountain are regionally extensive over an area of at least 300 square kilometers.