This master thesis contents alternative design of three spans single-railed steel bridge and its main bearing structures. The bridge is located in km 19,459 on the track Děčín - Oldřichov. Crossing barrier is highway D8. The span is 28,38 m + 41,28 m + 28,38 m. The main bearing structure consists of solid steel beams with variable height of 2,3 m ~ 3,8 m, which are in the axial distance of 6 meters and reinforced with lengthwise and transverse stiffeners. The lower bridge deck with a continuous ballast bed consists of reinforced concrete bath, which is coupled with steel cross beams. All elements of the structure are made out of steel S 355. For design of the following standards have been used: ČSN EN 1991-2, ČSN EN 1993, ČSN EN 1994 – 2.

This thesis deals with the diagnostics reinforced concrete girder bridge near the village Bílčice. The aim is to inspect the bridge, to describe disorders and their causes, propose and evaluate diagnostic methods to obtain the necessary data for determining the load capacity bridge.

The subject of Diploma thesis is the design of bridge on the highway Jánovce - Jablonov and his static solution. Selected variant is made from four span 34+44+44+34m and supporting structure consist of monolithic two beams of prestressed concrete. Height of cross section is over the whole lenght of the bridge constant. Each beams will be built on sliding formwork. The design of supporting structure is made according to limit states, including addressing timing analysis. Calculation of the effects of loading is made by software and reviews are calculated by hand according to Eurocode.

My thesis is focused on a design and comparism of the highway bridge across Dolansky creek. The bridge is built by balanced cantilever method. The common span length is 110metres. The bridge is post-tensioned concrete structure.The static model is made of beams.The static analysis during lifespan of bridge is made by Time discretization analysis . The design of reinforcement is made for longitudinal section and cross section.

This thesis deals with a design of the bridge for highway D47 crossing the valley. From three alternative solution is chosen solution of a double-girder. The longitudinal direction of the structure is designed as eight span structure. The lenght of the spans is 25 + 6 x 35 + 25 m. Detailed design of the structure selected variants of the bridge is carried out according to limit states including consideration of the impact of construction on the bridge of his design. static model is carried out as a whip. It is elaborated a detailed structural analysis and it is developed drawings and visualization of the bridge.

The thesis focuses on the solution of the bridge construction made of prestressed concrete. The bridge is situated on the road II/485 and it is headed over the road I/48. Cathegory of the road communication is S 7,5. The construction is continuous and consists of five arrays. The lenght of the bridge construction is 125,1 m. The burden to the construction is according to ČSN EN 1991-2 standard. Inner forces are solved by using computational model. This model works on the FEM calculation axiom. The size is according to ČSN EN 1992-1-1 and ČSN EN 1992-2 standards.

Subject of this master-thesis is perpendicular bridging over „railway “ČD Břeclav – Přerov v km 180,287 033.Its content is the design of the construction of the bicameral multipole concrete bridge. The chosen option is formed by two additionally prestressed chambers connected by slab. The total length of 10-pin bridge is 307,20 metres. The calculation of effects of the load is done by software NEXIS. The assessment of construction is done manually according to standard ČSN-EN 1992-1-1. The calculation is done including time analysis.

Diploma thesis deals with design pre-stressed highway bridge over the valley Polančice Brook and cart track. There are designed 4 studies, from which variantion double-chamber girder with 4 spans in chosen. It is elaborated a detailed structural analysis and bridge is considered a proposal to limit states for temporary and permanent design situations according to European standards - Eurocodes. It is developed drawings and visualization of bridge and construction process.

Thesis describes the design and assessment of a plan view of a curved road bridge, which is a part of an elevated crossing transferring directional divided communication and tram line of public transport in Brno. There are four variants of cross sections designed, from which is selected bicameral cross section with arched angled bottom plate, which should be aesthetically pleasant to impress in an urban environment. Static calculation is processed and design is assessed by current European standards. Then clear and detailed drawings, the process of construction and visualization of the bridge are processed.

Diploma thesis describes the design and assessment of bridge supporting structure on the ramp in Brno. Road bridge crosses the I/42 road and railway. The bridge is part of the VMO Brno. The structure is designed from prestressed concrete. Assessment of construction is carried out in accordance with applicable European standards. When designing the support structure is taken into account the gradual construction of the bridge. The thesis includes design calculation, drawing documentation and 3D visualization.