In this thesis, we investigate physical-layer network coding in an L × M × K relay network, where L source nodes want to transmit messages to K sink nodes via M relay nodes. We focus on the information processing at the relay nodes and the compute-and-forward framework. Nested lattice codes are used, which have the property that every linear combination of codewords is a valid codeword. This property is essential for physical-layer network coding. Because the actual network coding occurs on the physical layer, the network coding coefficients are determined by the channel realizations. Finding the optimal network coding coefficients for given channel realizations is a non-trivial optimization problem. In this thesis, we provide an algorithm to find network coding coefficients that result in the highest data rate at a chosen relay. The solution of this optimization problem is only locally optimal, i.e., it is optimal for a particular relay. If we consider a multi-hop network, each potential receiver must get enough linear independent combinations to be able to decode the individual messages. If this is not the case, outage occurs, which results in data loss. In this thesis, we propose a new strategy for choosing the network coding coefficients locally at the relays without solving the optimization problem globally. We thereby reduce the solution space for the relays such that linear independence between their decoded linear combinations is guaranteed. Further, we discuss the influence of spatial correlation on the optimization problem. Having solved the optimization problem, we combine physical-layer network coding with physical-layer secrecy. This allows us to propose a coding scheme to exploit untrusted relays in multi-user relay networks. We show that physical-layer network coding, especially compute-and-forward, is a key technology for simultaneous and secure communication of several users over an untrusted relay. First, we derive the achievable secrecy rate for the two-way relay channel. Then, we enhance this scenario to a multi-way relay channel with multiple antennas. We describe our implementation of the compute-and-forward framework with software-defined radio and demonstrate the practical feasibility. We show that it is possible to use the framework in real-life scenarios and demonstrate a transmission from two users to a relay. We gain valuable insights into a real transmission using the compute-and-forward framework. We discuss possible improvements of the current implementation and point out further work. / In dieser Arbeit untersuchen wir Netzwerkcodierung auf der Übertragungsschicht in einem Relay-Netzwerk, in dem L Quellen-Knoten Nachrichten zu K Senken-Knoten über M Relay-Knoten senden wollen. Der Fokus dieser Arbeit liegt auf der Informationsverarbeitung an den Relay-Knoten und dem Compute-and-Forward Framework. Es werden Nested Lattice Codes eingesetzt, welche die Eigenschaft besitzen, dass jede Linearkombination zweier Codewörter wieder ein gültiges Codewort ergibt. Dies ist eine Eigenschaft, die für die Netzwerkcodierung von entscheidender Bedeutung ist. Da die eigentliche Netzwerkcodierung auf der Übertragungsschicht stattfindet, werden die Netzwerkcodierungskoeffizienten von den Kanalrealisierungen bestimmt. Das Finden der optimalen Koeffizienten für gegebene Kanalrealisierungen ist ein nicht-triviales Optimierungsproblem. Wir schlagen in dieser Arbeit einen Algorithmus vor, welcher Netzwerkcodierungskoeffizienten findet, die in der höchsten Übertragungsrate an einem gewählten Relay resultieren. Die Lösung dieses Optimierungsproblems ist zunächst nur lokal, d. h. für dieses Relay, optimal. An jedem potentiellen Empfänger müssen ausreichend unabhängige Linearkombinationen vorhanden sein, um die einzelnen Nachrichten decodieren zu können. Ist dies nicht der Fall, kommt es zu Datenverlusten. Um dieses Problem zu umgehen, ohne dabei das Optimierungsproblem global lösen zu müssen, schlagen wir eine neue Strategie vor, welche den Lösungsraum an einem Relay soweit einschränkt, dass lineare Unabhängigkeit zwischen den decodierten Linearkombinationen an den Relays garantiert ist. Außerdem diskutieren wir den Einfluss von räumlicher Korrelation auf das Optimierungsproblem. Wir kombinieren die Netzwerkcodierung mit dem Konzept von Sicherheit auf der Übertragungsschicht, um ein Übertragungsschema zu entwickeln, welches es ermöglicht, mit Hilfe nicht-vertrauenswürdiger Relays zu kommunizieren. Wir zeigen, dass Compute-and-Forward ein wesentlicher Baustein ist, um solch eine sichere und simultane Übertragung mehrerer Nutzer zu gewährleisten. Wir starten mit dem einfachen Fall eines Relay-Kanals mit zwei Nutzern und erweitern dieses Szenario auf einen Relay-Kanal mit mehreren Nutzern und mehreren Antennen. Die Arbeit wird abgerundet, indem wir eine Implementierung des Compute-and-Forward Frameworks mit Software-Defined Radio demonstrieren. Wir zeigen am Beispiel von zwei Nutzern und einem Relay, dass sich das Framework eignet, um in realen Szenarien eingesetzt zu werden. Wir diskutieren mögliche Verbesserungen und zeigen Richtungen für weitere Forschungsarbeit auf.

Opportunistic selection algorithms have grown in importance as next generation wireless systems strive towards higher data rates and spectral efficiencies. For example, in orthogonal frequency division multiple access(OFDMA), the system bandwidth is divided into many sub channels. For each sub channel, the user with the highest channel gain is opportunistically assigned to it. .Likewise, in a multi-source, multi-destination (MSD) cooperative relay system, a relay node must be assigned for every source-destination (SD) pair. The assignment decisions are based on local channel knowledge and must be fast so as to maximize the time available for data transmission. We develop novel multiple access based splitting-based selection algorithms for OFDMA and MSD systems. These systems are unique in that the same user and relay can be the most suitable one for multiple sub channels and multiple SD pairs, respectively. For OFDMA systems, we propose an algorithm called Split Select that assigns for every sub channel the user with the highest channel gain over it. For MSD systems, we propose a contention-based en masse assignment (CBEA) algorithm that assigns to each SD pair a relay that is capable of aiding it. Both Split Select and CBEA are fast and scale well with the number of nodes. For example, Split Select requires just 2.2 slots, on average, to assign a sub channel to its best user even when there are an asymptotically large number of contending users. Likewise, CBEA often takes far less than one slot, on average, to assign a relay to each SD pair.

Traditionally, source coding (data compression) and channel coding (error protection) are performed separately and sequentially, resulting in what we call a tandem (separate) coding system. In practical implementations, however, tandem coding might involve a large delay and a high coding/decoding complexity, since one needs to remove the redundancy in the source coding part and then insert certain redundancy in the channel coding part. On the other hand, joint source-channel coding (JSCC), which coordinates source and channel coding or combines them into a single step, may offer substantial improvements over the tandem coding approach. This thesis deals with the fundamental Shannon-theoretic limits for a variety of communication systems via JSCC. More specifically, we investigate the reliability function (which is the largest rate at which the coding probability of error vanishes exponentially with increasing blocklength) for JSCC for the following discrete-time communication systems: (i) discrete memoryless systems; (ii) discrete memoryless systems with perfect channel feedback; (iii) discrete memoryless systems with source side information; (iv) discrete systems with Markovian memory; (v) continuous-valued (particularly Gaussian) memoryless systems; (vi) discrete asymmetric 2-user source-channel systems. For the above systems, we establish upper and lower bounds for the JSCC reliability function and we analytically compute these bounds. The conditions for which the upper and lower bounds coincide are also provided. We show that the conditions are satisfied for a large class of source-channel systems, and hence exactly determine the reliability function. We next provide a systematic comparison between the JSCC reliability function and the tandem coding reliability function (the reliability function resulting from separate source and channel coding). We show that the JSCC reliability function is substantially larger than the tandem coding reliability function for most cases. In particular, the JSCC reliability function is close to twice as large as the tandem coding reliability function for many source-channel pairs. This exponent gain provides a theoretical underpinning and justification for JSCC design as opposed to the widely used tandem coding method, since JSCC will yield a faster exponential rate of decay for the system error probability and thus provides substantial reductions in complexity and coding/decoding delay for real-world communication systems. / Thesis (Ph.D, Mathematics & Statistics) -- Queen's University, 2008-05-13 22:31:56.425