This diploma thesis is focused on design and postprocessing of project documentation for two storey, cellular basement kindergarten in Měrovice nad Hanou. The target is to create operational dispositive solution which takes account of everyday operations. The operation consists of two class, a multipurpose hall, an operating section and a part of teachers. The buiding is designed from construction system Porotherm. It is built with warm flat roof and the building is based on strip foundations.

This diploma thesis solves with the design and static assessment of a multipurpose center in Hodonín. The structure is divided into three statically separated parts. The two structural units, consisting of steel frames with composite reinforced concrete slabs, are symmetrical and the middle part, formed by wooden frames made of glued laminated timber. The construction was solved using a computational 3D model. The model was created in the program RFEM 5.21.01. Using the model, the internal forces and dimensions of the usual elements were calculated. The construction was assessed in the program RFEM 5.21.01 and in MS Excel 2010. The outermost buildings have 7 floors and are designed for residential and office space. The maximum height of the structure is 27.60 m, including the attic. The central multifunctional hall is roofed by a walkable green roof. The maximum height of the middle part is 12.50 m. The largest floor plan dimensions of the building are 49,050 m x 24,000 m.

The thesis deals with physical principles of ultrasound with following specialization on ophtalmic ultrasound system Nidek Echoscan 4000 and its properties. And also it deals with description of investigative techniques in ophthalmology (A-mode, B-mode, biometry and pachymetry). Next, they was suggested procedures of measurement and that is spatial resolution (axial and lateral spatial resolution) and propagation speed of ultrasound depending on the temperature. Then these properties was tested on laboratory phantoms of eye – ETETECH LTD. and Multipurpose Ultrasound Phantom but on created phantoms of eye too, which will be made from agarose gel with build-in materail (fishing line, plastic film, plastic bag and rubber). At the end, measured values was processed in the generated program.

Master´s thesis describes the design and the check of the construction of the art gallery. This hall has the elliptical ground plan, the main dimensions are 25 x 40 m and the height is 12 m. The structure consists of 24 supporting curved ribs, which are supported on elliptical ring of steel at the top of the construction. Between the ribs are inserted purlins, which support the perimeter cladding. The structure is designed alternatively like the system of the timber solid beams from the glued laminated timber and the system of the steel truss girders.

This master´s thesis „Multipurpose building in Kromeriz“ is in a stage of project documentation of new multi-function building. The builing is designed as detached building with four stories and a flat roof. There are commercial areas – caffe, reality office and clothes store – in the first story. Then there are cellar for flats. There are situated 14 flats in two stories . There is designed a luxury flat with a huge taxace in the fourth story. The building is projected in a system of Heluz company and it is based on the wall footings. A construction of ceilling is made by steel concrete slab

The paper deals with development of the area Brno – Žebětín, its object is to increase the attractiveness of the area and to provide a range of activities for inhabitants of the city Brno and its surroundings. The project outlines a current state of the region with its advantages and disadvantages. Simultaneously new variants of improvement are included. Possibilities of building a skatepark, inline track, archery club and bouldering are suggested for providing an additional entertainment options. Great emphasis is placed on helping people with disabilities by hiporehabilitation. Other important factors as races at the Masaryk circuit are also considered. The overall impression is underlined by architectural design of an area centre with dominants in the form of an obelisk, visual axis and the Green Boulevard. During the process of creating of the whole concept were weighted needs of inhabitants, preservation of current uses and protection of local nature

The theme of master’s thesis is the newly built sports center in Rosice. This work aids to develop design documents for building construction. The building is partial basement, four-storey. The building is designed of systém Heluz with cast-in-place reinforced concrete floors. The roof construction is single-flat, over part of the building is composed of timber truss Gang-nail. In the building there is the bar with bowling alley, squash, small multipurpose sports hall, fitness room, table tennis and spinning. In the basement are designed three saunas. Tennis courts with playground are outside next to the building.

The subject of this dissertation is to design the steel structure of the multipurpose sport hall in Pardubice. The platform dimensions are 50,0 m x 60,0 m. Headroom of the structure is +12,347 m and the total height is +15,026 m. The main frame is created by column on one side and by the spatial truss arc beam.This main frame was chosen duet the evaluation of preliminary design of two variants. The static calculation of main load-bearing elements including joints and specific details was made for the selected option. The technical report and drawings specified by the supervisor. For design of the structure were used valid standards ČSN EN.

The subject of this thesis is the design and static assessment of timber load bearing structure of The Multipurpose buildings in Podlesí u Příbram. The complex is composed of the administrative building and a multipurpose hall and corridor. The administrative building has three floors and it is designed as a wooden frame. The hall is designed as a wooden frame system. Corridor connects the administrative building with a hall and it is 1.3 meters above the ground. Corridor is a wooden structure. Climatic loads are considered for the village Podlesí u Příbram.

This thesis is focused on designing a new multipurpose building with parts used for apartments, administration offices and a bar. The land, which the building is situated on, is located in the city of Olomouc. The structure consist of five above-ground floors and one underground floor, where a garage is designed. The vertical supporting construction are made of reinforced cast-in-place concrete columns, the horizontal of reinforced concrete cast-in-place boards, other vertical walls are made of sand-lime and aerated concrete blocks. The roof is warm flat.