The diploma thesis follows the project of the pre-diploma, in which detailed analyzes of the potential of the village were made, from which it follows that the most important place that the village needs to revive for further development is the village square itself. In the current state, a cluster of buildings is built on a clearly defined area of the village, which brings chaos and confusion to the urban structure. The building of the municipal office stopped communicating through the building of the former elementary school. The area between buildings, formerly designed for local residents to hold festivals, now serves as a handling yard. The aim of the work is to clean the area of the village, to restore its original lost character and to add the urban structure to a building that will serve both local inhabitants and tourist visitors.

The aim of this thesis is to elaborate a project documentation of the building construction. This project deals with two new buildings of civic facilities allocated in the centre of Brodek u Konice on an almost flat plot. These two buildings are adjoining; however, statically and operationally independent on each other. In the building SO 01 are located a library and a sweet-shop and the building SO 02 is designed for the local authority. The building containing library is projected as a two-storeys building; while, the building for local authority has only a ground floor. Both buildings are without any basement and they are roofed by wooden trusses. The library building has a hip roof and the local authority building has a hip roof on the east side and a gable on the west side. A floor plan of the library building has rectangular shape; while, building for local authority is almost square shaped. Support structures for both buildings consist of masonry of therm type brick blocks and pre-stressed celling slabs. The library is divided to the public area with a hygienic facility for visitors and an area accessible only for employees with hygienic and technical facilities. The 1st floor of the library building is fully accessible for visitors and they can also use a balcony, a terrace or a grassy area which is approachable from the terrace. The local authority building has only the ground floor containing offices, a conference room, hygienic and technical facilities designed for employees and hygienic facility for visitors. Paved areas for parking and a main entrance will be accessible from main road in the municipality.

IN MY DIPLOMA THESIS I ADDRESS THE PROPOSAL TO MUNICIPAL OFFICE IN DUBICKO ON THE LEVEL OF DOCUMENTATION FOR CONSTRUCTION. THE SITE IS ON THE SLOPING LAND, IN THE MIDDLE OF VILLAGE DUBICKO. THE BUILDING IS A DOUBLE-STOREY BUILDING, AND IT IS A PARTLY BASEMENT. FOUNDATION ARE SOLVED BY BASIS STRIPS MADE OF PLAIN CONCRETE. VERTICAL CONSTRUCTIONS ARE MADE OF HOLLOW CLAY BLOCK HELUZ. THE FLOOR STRUCTURE ABOVE THE BASEMENT FLOOR IS MADE OF PRESTRESSED HOLLOW CORE SLAB SPIROLL. THE FLOOR STRUCTURE ABOVE THE 1ST FLOOR, THE ENTRANCE HALL AND CEREMONIAL HALL, IS MADE OF TIMBER GLUED LAMINATED BEAMS. THE FLOOR STRUCTURE ABOVE THE POST OFFICE IS MADE OF PRESTRESSED HOLLOW CORE SLAB SPIROLL. THE ROOF IS HIPPED ROOF. PROJECT DOCUMENTATION IS PROCESSED IN COMPUTER PROGRAM ARCHICAD.

The aim of the master thesis is to design nearly zero-energy building of the municipal office in the city of Bojkovice. In the first part an architectural and constructional solution was designed. The building has three above-ground floors. It has a flat green roof with skylights and photovoltaics. First floor includes reception, break room, archives, offices, meeting room, kitchenette, sanitary facilities and boiler room. Second floor consists of break room, archives, storerooms, offices and sanitary facilities. External load-bearing walls, internal load-bearing walls and partitions are made of ceramic blocks. Columns, girders, floor slabs and roof slabs are made of monolithic reinforced concrete. Cladding is insulated with ETICS. In the second part HVAC was designed. Heating is provided by gas condensing boiler. The building is mechanical ventilated by AC units situated in technical room in the third above-ground floor. Cooling is air-conditioned by fan-coil units designed in offices and conference hall, chillers are situated on the roof. The third part of the master thesis focused on design and comparison of various AC units. Drawings are processed in SW AutoCAD, calculations were made in Excel, the design of air-conditioning system and unit was made in SW Atrea DUPLEX 9.10, Aerocad and CLIMACAL.

The subject of the diploma thesis is the design of the construction of a multifunc-tional building of the municipal building in Předboj and the elaboration of the construction documentation. The proposed building is located near the existing village center. The building is designed on undeveloped land, which forms an im-aginary boundary between the existing buildings from the end of the 19th century and the beginning of the 20th century and the new buildings from the beginning of the 21st century. The architectural character suitably combines the character of the original development with gabled roofs with modern elements characterizing the new development. The building is divided into two wings. The east wing is one-storey and houses the premises of the municipal office. The west wing is mul-ti-storey. In the basement there are the technical facilities of the municipal office, on the first floor there are the library and the ceremonial hall. The attic is intended for the detached workplace of the basic art school.

The subject of the diploma thesis is the elaboration of project documentation for the construction of administrative building in Brno. The main entrance to the building is oriented to the south-east. The building is L-shaped and it is designed as a two-storey, partly with a cellar. The perimeter bearing masonry of the above-ground floors is designed from ceramic blocks of thickness 300 mm and the internal bearing masonry of thickness 250 mm. After that the basement masonry is made of concrete blocks thickness 300 mm cast in concrete. Internal non-bearing masonry made of ceramic blocks thickness 115 mm. The insulation of the building is designed as a certified contact insulation system of EPS material. The horizontal bearing structures are designed as a ceramic prefabricated rib-and-filler floor with concrete grout. The stairs are designed as reinforced concrete monolithic. The roof is warm flat roof with an extensive vegetation layer.

The work presented here gives a summary of territorial division and public administration development in Slovakia as the bases for present reform of public administration. This work deals with realization of this reform of public administration and territorial division in Slovakia and evaluate process and fulfillment of purposes of this reform. Key words: , , , , , , , , , , , , ,

Veronika Knotková, Prague Municipal Clerks 1900-1950 Abstract This work, based mainly on primary resources, deals with the issues of bureaucracy, i.e. with the elite group of officials/clerks of the legal category of the Prague Municipal Office in the first half of the 20th century. During this relatively long period, Prague reached a position of modern capital of a new state, Czechoslovakia, and one of Central European metropolises. The core of the thesis lays in explaining principles of functioning of the municipal bureaucracy, the development of its position, the course of its career and the factors that influenced them. Attention is paid to the mutual relations within this group and both to their individual and group strategies, with regard to other municipal officials of other than juristic previous university education within the Prague municipal office as well as to the relations of officials and representatives of municipal administration. It shows how the disciplinary rules were applied. Adequate attention is paid to the relationship/interventions of state administration into the self-government sphere.

The aim of the diploma thesis is to develop the design documentation for the construction of the object of civic amenities. It is a multifunctional building, there are municipal office, library and cultural hall. It is detached building, which consists of two dilated parts, part A – Cultural hall and part B – Administration. Part A is single-storey with internal gallery accessible from the second floor of part B. Part B has a basement and three floors. Part A has external and internal reinforcing walls proposed as cast-in-place reinforced structure from fair-faced concrete. Part B is proposed as traditional masonry building made of brick blocks, the external walls in the basement are from concrete blocks of permanent formwork. The floor-structures will be made of hollow prestressed panels supplemented by reinforced cast-in-place structures. The roof structures are designed as warm flat green roofs. The facade of part A is proposed as ventilated, external wall finish is timber horizontal cladding. The facade of part B will be contact, external wall finish is made of brick facing tapes.