Hexavalent chromium is an extremely carcinogenic chemical that has been widely produced in the United States. This has led to major waste contamination and pollution throughout the country. According to the Environmental Working Group Hexavalent chromium has been found in 89% of city tap water. Most people believe they are safe using regular home filter systems however that is not true. A more expensive ion exchange water treatment unit is required. Therefore to protect yourselves from this carcinogenic metal a reliable test is required. In this study we have developed a Zinc Sulfide Manganese doped Quantum Rod technology to detect for presence of chromate and other harmful transitional metals in drinking water. Quantum Rods were synthesized using a hydrothermal reaction method. They were fully characterized using UV-visible absorption spectroscopy, fluorescence emission spectroscopy, X-ray Photoelectric Spectroscopy (XPS) and High Resolution Transmission Electron Microscopy (HRTEM). Quantum Rod metal detection studies were done with 28 different ions in a 96-well fluorescent plate reader. Results show that highest sensitivity to 8 ions including the toxic ions of chromate and mercury allowing us to create a sensor to detect these items.

The many advances of nano technology extensively revolutionize mechanics. A tremendous need is growing to further bridge the gap between the classical mechanics and the nano scale for many applications at different engineering fields. For instance, the themes of interdisciplinary and multidisciplinary topics are getting more and more attention especially when the coherency is needed in diagnosing and treating terminal diseases or overcoming environmental threats. The fact that how mechanical, biomedical and electrical engineering can contribute to diagnosing and treating a tumor per se is both interesting and unveiling the necessity of further investments in these fields. This dissertation presents three different investigations in the area of nano mechanics and nano materials spanning from computational bioengineering to making mechanically more versatile composites. The first part of this dissertation presents a numerical approach to study the effects of the carbon nano tubes (CNTs) on the human body in general and their absorbability into the lipid cell membranes in particular. Single wall carbon nano tubes (SWCNTs) are the elaborate examples of nano materials that departed from mere mechanical applications to the biomedical applications such as drug delivery vehicles. Recently, experimental biology provided detailed insights of the SWCNTs interaction with live organs. However, due to the instrumental and technical limitations, there are still numerous concerns yet to be addressed. In such situation, utilizing numerical simulation is a viable alternative to the experimental practices. From this perspective, this dissertation reports a molecular dynamics (MD) study to provide better insights on the effect of the carbon nano tubes chiralities and aspect ratios on their interaction with a lipid bilayer membrane as well as their reciprocal effects with surface functionalizing. Single walled carbon nano tubes can be utilized to diffuse selectively on the targeted cell via surface functionalizing. Many experimental attempts have smeared polyethylene glycol (PEG) as a biocompatible surfactant to carbon nano tubes. The simulation results indicated that SWCNTs have different time-evolving mechanisms to internalize within the lipid membrane. These mechanisms comprise both penetration and endocytosis. Also, this study revealed effects of length and chirality and surface functionalizing on the penetrability of different nano tubes. The second part of the dissertation introduces a novel in situ method for qualitative and quantitative measurements of the negative stiffness of a single crystal utilizing nano mechanical characterization; nano indentation. The concept of negative stiffness was first introduced by metastable structures and later by materials with negative stiffness when embedded in a stiffer (positive stiffness) matrix. However, this is the first time a direct quantitative method is developed to measure the exact value of the negative stiffness for triglycine sulfate (TGS) crystals. With the advancements in the precise measuring devices and sensors, instrumented nano indentation became a reliable tool for measuring submicron properties of variety of materials ranging from single phase humongous materials to nano composites with heterogeneous microstructures. The developed approach in this chapter of the dissertation outlines how some modifications of the standard nano indentation tests can be utilized to measure the negative stiffness of a ferroelectric material at its Curie temperature. Finally, the last two chapters outline the possible improvements in the mechanical properties of conventional carbon fiber composites by introducing 1D nano fillers to them. Particularly, their viscoelastic and viscoplastic behavior are studied extensively and different modeling techniques are utilized. Conventional structural materials are being replaced with the fiber-reinforced plastics (FRPs) in many different applications such as civil structures or aerospace and car industries. This is mainly due to their high strength to weight ratio and relatively easy fabrication methods. However, these composites did not reach their full potential due to durability limitations. The majorities of these limitations stem from the polymeric matrix or the interface between the matrix and fibers where poor adhesion fails to carry the desired mechanical loadings. Among such failures are the time-induced deformations or delayed failures that can cause fatal disasters if not taken care of properly. Many methodologies are offered so far to improve the FRPs' resistance to this category of time-induced deformations and delayed failures. Several researchers tried to modify the chemical formulation of polymers coming up with stiffer and less viscous matrices. Others tried to modify the adhesion of the fibers to the matrix by adding different chemically functional groups onto the fibers' surface. A third approach tried to modify the fiber to matrix adhesion and at the same time improve the viscous properties of the matrix itself. This can be achieved by growing 1D nano fillers on the fibers so that one side is bonded to the fiber and the other side embedded in the matrix enhancing the matrix with less viscous deformability. It is shown that resistance to creep deformation and stress relaxation of laminated composites improved considerably in the presence of the nano fillers such as multiwall carbon nano tubes (MWCNTs) and zinc oxide nano wires (ZnO- NWs). The constitutive behaviors of these hybrid composites were investigated further through the use of the time temperatures superposition (TTS) principle for the linear viscoelastic behavior and utilizing phenomenological models for the viscoplastic behavior. / Ph. D.

The interaction of light and matter at nanoscale is the subject of study of this dissertation. Particularly, the coupling of light to surface plasmons and their applications in the fields of spectroscopy and sensing is the focus of this work. In terms of spectroscopy, the simple reason of using light to study the chemical structures of different materials is the fact that the energy of light lies in the range of vibrational and electronic transitions of matter. Further, the ability to squeeze light to subwavelength dimensions opens up new possibilities of designing nano-optical devices. In this work we explore surface plasmons for two major applications: (i) Directivity enhanced Raman spectroscopy and (ii) Chemical/biological sensing. Here a new enhancement phenomenon has been demonstrated experimentally in regards to Raman spectroscopy. Typically, Raman enhancement is considered in terms of local fields only. Here we show the use of directive nanoantennas to provide additional enhancement of two orders of magnitude. The nanoantenna design is optimal in the sense that almost all of the scattered light is coupled into the numerical aperture of the collecting lens. It is shown that the additional enhancement from directivity pushes the sensitivity to single molecule regime. Further, the out of plane radiation and simplicity of the design makes it an ideal candidate for use with typical commercial microscope setups. Extra ordinary transmission through nanohole arrays in metallic films is studied for refractive index sensing. Bulk resolution of 6×10-7 is demonstrated by optimizing array dimensions, wavelength of operation, noise reduction and consideration of sensitivity of the detecting CCD camera. Self-assembled nanostructures are investigated for spectroscopic applications. Time dependent studies of nanorods assembled in end-to-end and side-by-side configurations are conducted. The end-to-end configuration results in higher local field enhancements whereas; the side-by-side configuration shows a reduction in local fields because of the cancellation of radial field components between the neighbouring nanorods. It should be noted that higher fields are desirable for Raman spectroscopy. Grating structures have been analysed using reduced coupled mode theory. In most cases, only three lowest order modes prove to be sufficient for accurate description of the system response. Here we present design guidelines for broadband operation and optimization of high quality factor resonators. Finally the complex reflection coefficient from arbitrary terminated nanorods has been investigated. Phase of reflection plays an important role in the determination of resonance wavelength of nanoantennas. It is shown that the localized surface plasmon resonance of nanoparticles can be considered in terms of propagating surface plasmons along a nanorod of similar geometry where the length of the nanorod approaches zero accompanied with π degrees of phase of reflection. The contributions made in this work can prove useful in the fields of analytical chemistry and biomedical sensing. The directive nanoantenna can find applications in a number of areas such as light emitting devices, photovoltaics, single photon sources and high resolution microscopy. Our work related to EOT based sensing is already approaching the resolution of commercially available refractive index sensors with the added advantage of multiplexed detection. / Graduate

Over the last few decades, a vast research is going on, to study the optical properties of the nano particles i.e., metal and semiconductors thoroughly. Till date most of the optical studies are based on single particle measurement of a quantum dot (QD) or a chromophore under the influence of an external plasmonic field stimulus. In this the-sis, we tried to address the energy transfer at non local level on a layer of compact, monolayer QD assemblies over micro meter range. The energy transfer occurs in the presence of external field of metal particles or nanorods leads to the enhancement or quenching the emission from a layer of QDs. Chapter 1 is introduction to the basic theoretical aspects of excitons in semiconductor (QDs) and its optical properties under strong confinement regime. The discussion is followed with the optical properties of gold nanoparticles and rods, describing size and shape dependent variation of absorption properties, based on Mie and Mie-Gans theory. Theoretical background of collective effects in QD assemblies based on exciton-plasmonic interactions at single particle level as well as polarization based plasmo-nenhanced fluorescence has been subjected. Experimental techniques are explained in chapter 2 which contains the details of the synthesis of polymer capped nanoparticles with the respective characterization. A discussion on the synthesis methods for cadmium selenide QDs, gold nano particles and the rods with different polymer cap-ping legends and the related capping exchange methods. The thin film preparation of QD monolayers as well as hybrid nano assemblies using several techniques, i.e., Langmuir-Blodgett (LB), dip coat methods are provided. Further the details of surface morphology of the prepared thin films has been studied by different microscopic techniques i.e., atomic force microscopy (AFM), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The details of the PL emission measurements of these hybrid arrays using confocal, Raman and polarization based near field scanning optical microscope (NSOM) modes followed with the life time measurements. In third chapter, the substantial strong coupling and collective emission regime is engineered in the QD monolayer films embedded with tiny gold nano particles keeping the QD density same. Tuning the photoluminescence (PL) of semiconducting QD assemblies using small Au NPs in different ratio, different packing density and extent of spectral overlap between QD photoluminescence and the metal nanoparticle absorbance has been discussed. We provided possible experimental and theoretical evidence for the plasmon-mediated emergence of collective emission and enhanced quantum efficiency in these QD films with the consolidation of multiple emitters and multiple NPs. The quantum efficiency of these hybrid assemblies is further explored with different material as well as the size effect of metal nano particles. Chapter 4 comprises the experiment results of the self-assembled compact and partially aligned gold nano rod (GNR) arrays on QD monolayer films. We experimentally demonstrated the quantum efficiency of these QD hybrid assemblies is gaining max-imum when the longitudinal surface plasmon resonance (LSPR) absorption maxima of GNR arrays is resonant with the QD monolayer PL maxima and is always non-existent for the off resonant case. Further, we reported the variability in the size and morphology of these GNR domains leads to the maximum achieved enhancement as well as anisotropy value in comparison with isolated rods and the explored conditions to further enhance the efficiency in these QD hybrid assemblies.