Neste trabalho, foi realizado um estudo da obtenção de nanomateriais luminomagnéticos visando potenciais aplicações biológicas, a partir de dois diferentes tipos de estruturas, sendo elas: a formação de heteronanoestruturas luminomagnéticas de NPM de FePt/Fe3O4-CdSe recobertas com sílica; e a formação de nanomateriais luminomagnéticos por ligação covalente entre NPM de FePt/Fe3O4-Dopa-PIMA-PEG-NH2 e pontos quânticos de CdSe/ZnS-LA-PEG-COOH. Para o primeiro tipo de nanomaterial citado, foram testadas duas metodologias para obtenção das heteronanoestruturas: a mudança da estabilidade coloidal pela adição de pequenas quantidades de NaCl no meio contendo as NPM e os pontos quânticos previamente sintetizados; e o método de injeção a quente do precursor de selênio em um meio contendo as NPM como sementes, o precursor de cádmio e os agentes de superfície. O método de injeção a quente foi o que apresentou melhores condições para a formação das heteronanoestruturas. Para providenciar estabilidade coloidal em meio aquoso e superfície com biocompatibilidade, foi realizado o recobrimento com sílica na superfície das heteronanoestruturas luminomagnéticas com melhores condições. Para essa amostra, o tamanho médio obtido foi de 25,0 nm, com polidispersividade de 8,4 %, Ms = 11,1 emu.g-1 e comportamento superparamagnético, além de duas bandas de emissão (com excitação de 400 nm) centradas em 452 nm e 472 nm, respectivamente. Já para o segundo tipo de nanomaterial obtido neste trabalho, foram primeiramente obtidas NPM de FePt/Fe3O4 pelo método do poliol modificado acoplado à metodologia do crescimento, e pontos quânticos luminescentes de CdSe/ZnS pelo método de decomposição térmica de precursores organometálicos, sendo que ambas nanoestruturas apresentaram superfície hidrofóbica. Para a troca de ligantes para transferência das nanoestruturas para a fase aquosa e para providenciar biocompatibilidade visando aplicações biológicas, foram previamente preparados ligantes poliméricos de Dopa-PIMA-PEG-NH2 para recobrimento das NPM e de LA-PEG-COOH para recobrimento dos pontos quânticos. A conjugação química entre as nanoestruturas de FePt/Fe3O4-Dopa-PIMA-PEG-NH2 e CdSe/ZnS-LA-PEG-COOH foi realizada pelo método da carbodiimida em solução aquosa para a formação de uma ligação covalente amida entre os grupos amina e carboxilato em cada uma das nanoestruturas. Os nanomateriais luminomagnéticos obtidos apresentaram estabilidade coloidal em meio aquoso, com estreita distribuição de tamanho, apresentando RH de 79,96 nm, Ms de, aproximadamente, 10 emu.g-1 com coercividade e remanência quase nulos e intensa banda de emissão centrada em 580 nm. Espera-se que os nanomateriais obtidos neste trabalho possam ser promissores nanomateriais com propriedades multifuncionais para potenciais aplicações biológicas. / Here, luminomagnetic nanomaterials were obtained for potential biological applications. We have studied two different types of luminomagnetic nanomaterials, which are: formation of silica-coated FePt/Fe3O4-CdSe heteronanostructures; and formation of luminomagnetic nanomaterials from covalent bond between FePt/Fe3O4-Dopa-PIMA-PEG-NH2 magnetic nanoparticles and CdSe/ZnS-LA-PEG-COOH luminescent quantum dots. For the first type of luminomagnetic nanomaterials obtained, two methodologies were studied for formation of heteronanostructures, which are: modification of colloidal stability by addition of small amounts of NaCl into a solution with hydrophobic magnetic nanoparticles and luminescent quantum dots; and hot injection method of selenium precursor into a solution with magnetic nanoparticles seeds, cadmium precursors and surface agents. The hot injection method obtained better results than the other method studied for formation of heteronanostructures. To provide colloidal stability in aqueous solution and biocompatibility, the heteronanostructures were coated using silica shell. After silica coating, the heteronanostructures showed average diameter of 25 nm and polidispersivity of 8.4%, with Ms = 11.1 emu.g-1 and superparamagnetic behavior. Moreover, these nanomaterials showed two emission peaks centered at 452 and 472 nm. For the second type of nanomaterials obtained, FePt/Fe3O4 magnetic nanoparticles were synthesized by modified polyol method coupled to seeded-mediated growth, and CdSe/ZnS luminescent quantum dots were obtained by thermal decomposition of organometallic precursors. For the ligand exchange to transfer the nanostructures from organic media to aqueous solution, were used Dopa-PIMA-PEG-NH2 and LA-PEG-COOH polymers to provide colloidal stability and biocompatibility on magnetic nanoparticle surface and quantum dot surface, respectively. The chemical conjugation between FePt/Fe3O4-Dopa-PIMA-PEG-NH2 and CdSe/ZnS-LA-PEG-COOH nanostructures was obtained by EDC coupling in aqueous solution, which linked amine and carboxylate groups in each nanostructure to provide the formation of amide bond. The luminomagnetic nanomaterials obtained showed colloidal stability in aqueous solution, narrow size distribution, with RH equal to 79.96 nm, MS around 10 emu.g-1 with low coercivity and remanent magnetization, and intense emission peak centered at 580 nm. We expect these luminomagnetic nanomaterials be promisor nanomaterials with multifunctional properties for potential biological applications.

This thesis deals with one-dimensional (1D) and two-dimensional nanomaterials (2D) in terms of their utilization for new types of gas sensors. Thesis focuses on study of sensing elements for gas sensors based on semiconductor metal oxide materials (MOX) and their manufacturing technology. The objective of the thesis is the design and implementation of a sensing elements formed by selected nanomaterials based on the structure of interdigital electrodes. The result of the practical part of the thesis is the characterization and comparison of materials in terms of their detection parameters in the presence of selected test gases. The first part of thesis hierarchically defines chemoresistive gas sensor, characterizes and explains its operation principle. Second part studies 1D and 2D nanomaterials of sensing elements for MOX chemoresistive gas sensors, contains a research of their properties and describes their methods of manufacturing and implementation. The last part deals with the implementation of the sensitive layer of the sensor with selected nanomaterials, characterizes and compares their detection properties.

De nos jours, les émulsions stabilisées par adsorption de particules colloïdales à l'interface liquide-liquide (émulsions de Pickering) présentent un intérêt pour une grande variété d'applications allant des produits pharmaceutiques ou alimentaires aux modèles pour la préparation de nouveaux matériaux. Dans cette thèse, des émulsions huile-dans-eau (H/E) et eau-dans-huile (E/H) ont été efficacement stabilisées grâce à des particules inorganiques colloïdales (oxyde de graphène (GO) et nanofeuillets de nitrure de bore (h-BNNS)). L'adsorption de particules à l'interface huile-eau est induite par l'ajustement de la mouillabilité des particules dans les milieux liquides. Deux types d'émulsions, H/E et E/H, sont formées en utilisant des matériaux bidimensionnels qui possèdent des comportements hydrophiles différents. Les conditions requises pour atteindre l'émulsion la plus stable sont étudiées en variant la formulation de l’émulsion pour chaque type de particules. Les microstructures finales des émulsions peuvent être modifiées en ajustant leur composition initiale. L'utilisation d'une concentration élevée de particules améliore la stabilité des émulsions. Des émulsions à base de h-BNNS ont été rapportées dans ce travail pour la première fois et leur comportement a été profondément étudié. De plus, une nouvelle approche verte pour obtenir des membranes poreuses à base d'alcool polyvinylique (PVA) a été rapportée. Dans ce cas, l'ajout de PVA à l'émulsion augmente sa stabilité à long terme et permet sa mise en forme à l'aide de technologies conventionnelles telles que l’étalement. Les composites polymères obtenus à partir d'émulsions Pickering présentent une microporosité de 0,19 ± 0,03 µm ou 1,1 ± 0,3 µm en fonction du temps de séchage. Les membranes poreuses obtenues présentent de bonnes performances en matière de perméabilité à l'eau et de rejet des particules. Pour des membranes ayant une taille de pores d'environ 1,1 µm et une perméabilité à l'eau d'environ 2000 L / h / m2, un taux de rejection de 86% a été mesuré avec des particules de la même taille que les pores. / Emulsions stabilized through the adsorption of colloidal particles at the liquid-liquid interface have been of interest in a wide variety of applications, ranging from pharmaceutical or food products to templates for the preparation of new materials. In this thesis, oil-in-water (O/W) and water-in-oil (W/O) emulsions are efficiently stabilized using colloidal inorganic particles (graphene oxide (GO) and hexagonal boron nitride nanosheets (h-BNNS)). The adsorption of particles to the oil-water interface is induced by adjusting the particle wetting behavior in the liquid media. Two types of emulsions, O/W and W/O are formed by using two-dimensional materials possessing different hydrophilic behaviors. The conditions required to reach the most stable emulsion using two different types of particles at different formulations are investigated. The final microstructures of the mixtures are tailored by adjusting the initial composition of emulsion. The use of high concentration of particles leads to enhanced stability of particles-stabilized emulsions. h-BNNS based emulsions were reported in this work for the first time and their behavior was deeply investigated. Furthermore, a novel green approach to obtain polyvinyl alcohol (PVA)-based porous membranes was reported. In this case, the addition of PVA to the emulsion increases its long term stability and allows its shaping using conventional technologies such as casting. The polymer composites obtained from emulsions stabilized with inorganic particles exhibit microporosity, showing typical pore dimensions of 0.19 ± 0.03 µm or 1.1 ± 0.3 µm depending on the curing time. These obtained porous membranes display good performance in water permeability and particle rejection. Membranes displaying a pore size about 1.1 µm showed water permeability about 2000 L/h m2 bar, and a rejection rate of 86 % with particles of the same size than the pores.

No description available.

Yes / In 1985, the serendipitous discovery of fullerene triggered the research of carbon structures into the world of symmetric nanomaterials. Consequently, Robert F. Curl, Harold W. Kroto and Richard E. Smalley were awarded the Noble prize in chemistry for their discovery of the buckminsterfullerene (C60 with a cage-like fused-ring structure). Fullerene, as the first symmetric nanostructure in carbon nanomaterials family, opened up new perspectives in nanomaterials field leading to discovery and research on other symmetric carbon nanomaterials like carbon nanotubes and two-dimensional graphene which put fullerenes in the shade, while fullerene as the most symmetrical molecule in the world with incredible properties deserves more attention in nanomaterials studies. Buckyball with its unique structure consisting of sp2 carbons which form a high symmetric cage with different sizes (C60, C70 and so on); however, the most abundant among them is C60 which possesses 60 carbon atoms. The combination of unique properties of this molecule extends its applications in divergent areas of science, especially those related to biomedical engineering. This review aims to be a comprehensive review with a broad interest to the biomedical engineering community, being a substantial overview of the most recent advances on fullerenes in biomedical applications that have not been exhaustively and critically reviewed in the past few years.

Due to the aggressive downscaling of the CMOS technology, power and current densities are increasing inside the chip. The limiting current conduction capacity(106 Acm−2)and thermal conductivity(201Wm−1K−1 for Al and 400 Wm−1K−1 for Cu) of the existing interconnects materials has given rise to different electro-thermal issues such a shot-spot formation, electromigration, etc. Exploration of new materials with high thermal conductivity and current conduction has thus attracted much attention for future integrated circuit technology. Among all the elemental materials, carbon nanomaterials (graphene and carbon nanotube) possess exceptionally high thermal (600-7000 Wm−1K−1) and current( ~108 -109 Acm−2)conduction properties at room temperature, which makes them potential candidate for interconnect materials. At the same time development of efficient energy harvesting techniques are also becoming important for future wireless autonomous devices. The excess heat generated at the hot-spot location could be used to drive an electronic circuit through a suitable thermoelectric generator. As the See beck coefficient of graphene is reported to be the highest among all elementary semiconductors, exploration of thermoelectric properties of graphene is very important. This thesis investigates the electrothermal and thermoelectric properties of metallic single walled carbon nanotube (SWCNT) and single layer graphene (SLG) for their possible applications in thermal management in next generation integrated circuits. A closed form analytical solution of Joule-heating equation in metallic SWCNTs is thus proposed by considering a temperature dependent lattice thermal conductivity (κ) on the basis of three-phonon Umklapp, mass-difference and boundary scattering phenomena. The solution of which gives the temperature profile over the SWCNT length and hence the location of hot-spot(created due to the self-heating inside the chip) can be predicted. This self-heating phenomenon is further extended to estimate the electromigration performance and mean-time-to-failure of metallic SWCNTs. It is shown that metallic SWCNTs are less prone to electromigration. To analyze the electro-thermal effects in a suspended SLG, a physics-based flexural phonon dominated thermal conductivity model is developed, which shows that κ follows a T1.5 and T−2 law at lower(<300 K) and higher temperature respectively in the absence of isotopes(C13 atoms). However in the presence of isotopic impurity, the behavior of κ sharply deviates from T−2 at higher temperatures. The proposed model of κ is found to be in excellent match with the available experimental data over a wide range of temperatures and can be utilized for an efficient electro-thermal analysis of encased/supported graphene. By considering the interaction of electron with in-plane and flexural phonons in a doped SLG sheet, a physics-based electrical conductance(σ) model of SLG under self-heating effect is also discussed that particularly exhibits the variation of electrical resistance with temperature at different current levels and matches well with the available experimental data. To investigate the thermoelectric performance of a SLG sheet, analytical models for See beck effect coefficient (SB) and specific heat (Cph) are developed, which are found to be in good agreement with the experimental data. Using those analytical models, it is predicted that one can achieve a thermoelectric figure of merit(ZT) of ~ 0.62 at room temperature by adding isotopic impurities(C13 atoms) in a degenerate SLG. Such prediction shows the immense potential of graphene in waste-heat recovery applications. Those models for σ, κ, SB and Cph are further used to determine the time evolution of temperature distribution along suspended SLG sheet through a transient analysis of Joule-heating equation under the Thomson effect. The proposed methodology can be extended to analyze the graphene heat-spreader theory and interconnects and graphene based thermoelectrics.

M. Tech. (Mechanical Engineering, Faculty of Engineering and Technology): Vaal University of Technology / Presently there exist a lot of controversies about the mechanical properties of nanomaterials. Several convincing reasons and justifications have been put forward for the controversies. Some of the reasons are varying processing routes, varying ways of defining equations, varying grain sizes, varying internal constituent structures, varying techniques of imposing strain on the specimen etc. It is therefore necessary for scientists, engineers and technologists to come up with a clearer way of defining and dealing with nanomaterials’ mechanical properties. The parameters of the internal constituent structures of nanomaterials are random in nature with random spatial patterns. So they can best be studied using random processes, specifically as stochastic processes. In this dissertation the tools of stochastic processes have been used as they offer a better approach to understand and analyse random processes. This research adopts the approach of ascertaining the correct mathematical models to be used for experimentation and modelling. After a thorough literature survey it was observed that size and temperature are two important parameters that must be considered in selecting the relevant mathematical definitions for nanomaterials’ mechanical properties. Temperature has a vital role to play during grain refinement since all severe plastic deformation involves thermomechanical processes. The second task performed in this research is to develop the mathematical formulations based on the experimental observation of 2-D grains and 3-D grains deformed by Accumulative Roll-Bonding and Equal Channel Angular Pressing. The experimental observations revealed that grains deformed by Accumulative Roll-Bonding and Equal Channel Angular Pressing are elongated when observed from the rolling direction, and transverse direction, and equiaxed when observed from the normal direction. In this dissertation, the different experimental observations for the grain size variants during grain refinement were established for 2-D and 3-D grains. This led to the development of a stochastic model of grain-elongation for 2-D and 3-D grains. The third task was experimentations and validation of proposed models. Accumulative Roll-Bonding, Equal Channel Angular Pressing and mechanical testing (tensile test) experiments were performed. The effect of size on elongation and material properties were studied to validate the developed models since size has a major effect on material’s properties. The fourth task was obtaining results and discussion of theoretical developed models and experimental results. The following facts were experimentally observed and also revealed by the models. Different approaches of measuring grain size reveal different strains that cannot be directly obtained from plots of the corresponding grain sizes. Grain elongation evolved as small values for larger grains, but became larger for smaller grains. Material properties increased with elongation reaching a maximum and started decreasing as is evident in the Hall-Petch to the Reverse Hall-Petch Relationship. This was alluded to the fact that extreme plastic straining led to distorted structures where grain boundaries and curvatures were in “non-equilibrium” states. Overall, this dissertation contributed new knowledge to the body of knowledge of nanomaterials’ mechanical properties in a number of ways. The major contributions to the body of knowledge by his study can be summarized as follows: (1) The study has contributed in developing a model of elongation for 2-D grain and 3-D grains. It has been generally reported by researchers that materials deformed by Accumulative Roll-Bonding and Equal Channel Angular Pressing are generally elongated but none of these researchers have developed a model of elongation. Elongation revealed more information about “size” during grain refinement. (2) The Transmission Electron Microscopy revealed the grain shape in three directions. The rolling direction or sliding direction, the normal direction and the transverse direction. Most developed models ignored the different approaches of measuring nanomaterials’ mechanical properties. Most existing models dealt only with the equivalent radius measurement during grain refinement. In this dissertation, the different approaches of measuring nanomaterials’ mechanical properties have been considered in the developed models. From this dissertation an accurate correlation can be made from microscopy results and theoretical results. (3) This research has shown that most of the published results on nanomaterials’ mechanical properties may be correct although controversies exist when comparing the different results. This research has also shown that researchers might have considered different approaches to measure nanomaterials’ mechanical properties. The reason for different results is due to different approaches of measuring nanomaterials’ mechanical properties as revealed in this research. Since different approaches of measuring nanomaterials’ mechanical properties led to different obtained results, this justify that most published results of nanomaterials’ mechanical properties may be correct. This dissertation revealed more properties of nanomaterials that are ignored by the models that considered only the equivalent length. (4) This research has contributed to the understanding of nanomaterials controversies when comparing results from different researchers.

The confluence of intriguing size and morphology dependent optical and chemical properties with versatile application in various fields, such as energetic and magnetic makes monometallic nonmaterial of high fundamental scientific interest. However, the challenge that needs to be addressed is to achieve their synthesis with a rational control on their dimensions, morphology and dispersion for the widespread applications of these materials. In addition to synthesis, achieving long-lasting stability of nonmaterial becomes imperative in order to realize their potential applications. Miniaturization in size of particles results in an increased surface to volume ratio, conducing especially reactive metal nanoparticals prone to oxidation. This thesis describes the synthesis of nearly monodiperse colloids of metallic and intermetallic nanoparticles using solvated metal atom dispersion method and digestive ripening facilitated interatomic diffusion process. Our aim is to understand the combinatiorial effects of nanosizing and stability on the functional properties of these nanomaterials. Towards this Direction, we investigated Co, A1 and Mg monometallic, and Au/Ag-In and Au-Sn intermetallic nanoparticle systems. Chapter 2 Describes the synthesis, detailed characterizations and magnetic properties of nearly monodisperse cobolt nanoparticles(<5nm) synthesized using a hydride synthetic protocol, solvated metal atom diserion method. The as-prepared cobalt nanoparticles in this size range exhibit intrinsic instability towards Oxidations. After 30 day of exposure to air, magnetic measurements showed drastic degration in saturation magnetization and complete conversion to antiferromagnetic cobalt oxide was confirmed. In order to achieve their stability, a heat treatment was applied to decompose the organic solvent and capping agent, resulting in carbonization of solvent/ligand around the surface of cobolt nano particles. Controlled and optimized annealing at different temperatures resulted in the formation of hexagonal closed packed (hcp) and fape-centered cubic (fcc) phases of metallic cobalt. Remarkably, the corresponding heat treated samples retained their rich magnetic behavior even after exposure to air for a duration of one year. Compared to un-annealed samples, magnetization values increased two-fold and the corecivity of nanoparticles exhibited strong dependence on the phase transformation of cobolt. Chapter 3 Deal with an exploratory study of the synthesis, characterization, and stabilization of nanometer-sized enegetic material, aluminum. Highly monodisperse colloidal aluminum nanoparticles (3.1‡ 0.6 mm) were prepared by using hexadecy amine (HAD) as the capping agent tetrahydrofurma as a coordinating solvent in the SMAD method. Since such small particles are highly prone to oxidation, a support materials is required for their stabilization. Stability has been achived by carbonization of the capping agent on the surface of A1 nanoparticles by carrying out thermal treatment of A1-HAD nanoparticles at a modest temperature. Presence of corbon was confirmed using Raman spectroscopy and TEM measurements evidencing that annealed A1 nanoparticles are encapsulated in a corbon matrix. The exhibition of robust stability was established using thermal analysis (TGA/DTA) wherein, oxidation of aluminum in air did not occur upto 500 0C. Indirectly, the successful passivation was further exploited in the synthesis and characterization of small sized monodisperse magnesium nanoparticles. The resulting samples were hybrided and nanosized MgH2 released hydrogen at much lower temperature than that of the bulk MgH2 (573 K). The observed hydrogen release was only partially reversible. This partial reversibility could be attributed to the coalescence of small sized Mg nanoparticles upon subsequent charging/discharging hydrogen cycles. In the next step, we exploed the intermetallic systes which are composed of more than one metallic species. Chapter 4 describes the synthesis and characterization of small sized, monodisperse (<10 nm) colloidal AuIn2 and Ag3In intermetallic nanoparticles. The formation of intermetallic nanoparticles could be explained by invoking digestive ripening facilitated atomic diffusion of Au/Ag and In nanoparticles followed simultaneously by their growth in te solution. The course of the reaction was followed using optical spectroscopy where the changes in UV-visible absorption band were correlated to the formation of AuIn/Ag3In intermetallic. Structural characterization, Performed using powder X-ray diffraction, brought out the formation of phase pure AuIn2 and Ag3In intermetallic compounds. Digestive ripening effects were clearly observed using transmission electron microscopy which showed the transformation of polydisperse physical mixture colloid of nanometallic species to uniform sized intermetallic nanoparticles. By invoking the phenomenon of interatomic diffusion at nanoscale favored by feasible thermodynamics ( G being negative) we were successful inrealizing the formation of these intermetallic nanoparticles. Optimization of temperature at which digestive ripening was performed, turned out to be a crucial factor in the successful synthesis of phase pure intermetallic nanoparticles. These promising results inspired us to study further the preparation of Au-Sn intermetallic system which is described in Chapter 5. The potential of such an unprecedented approach has been exploited in the synthesis of homogeneous intermetallic nanaocrystals of Au5Sn and AuSn. The two monometallic collids (Au and Sn), mixed in a stoichiometric amount were subjected to digestive ripening process. 1:1 stichiometry always led to the formation of eutectic mixture (Au5Sn and AUSn), The stoichiometry of monometallic nanocrystals. Therefore, by taking an extra equivalent of Au and Sn in two different experiments, phase pure Au5Sn and AuSn intermatillic nanocrsytals were obtained, respectively. This is the first observation that has been reported regarding the phase pure synthesis if Au5Sn intermetallic nanocrystals using solution based approach. Formation of different phases was established by structural characterization which elicited srystalline nature of the samples. A combination of TEM, HRTEM, and STEM-EDS mapping techniques employed here, brought and tailored phase. In conclusion, the careful selection of solvent, stoichiometry and growth directing agents is an important prerequisite for realizing distinct phases of Au-Sn system with a controlled morphology.

Fuel cell is a device that can directly convert chemical energy into electrical energy. For low-temperature fuel cells, catalysts are required. Fuel cells using Pt-based or other non-biological materials as catalysts are known as conventional fuel cells. Inspired from Nature, enzymes can be used as catalysts in fuel cells known as enzyme-based fuel cells. The conventional and enzymatic fuel cells share the same underlying electrochemical principles, while enzyme-based fuel cells have their intrinsic advantages and disadvantages due to enzyme properties. The objective of this thesis is to investigate the current/voltage/ power/stability capabilities of enzyme-based membrane-less H2 fuel cells in order to design the enzymatic fuel cells with improved performance. This thesis presents a facile, effective method for the construction of 3D porous carbon electrodes. The 3D porous carbon electrodes are constructed by compacting suitable carbon nanomaterials into discs. The 3D porous carbon electrodes, with large roughness, high specific surface area, and optimized pore size distribution, are able to increase the loading density of enzymes, that is, reaction sites per unit geometric electrode area. The high loading density of enzymes can result in the high current/power density of the enzyme-based membrane-less H2 fuel cells. Moreover, the large enzyme loading can bring about the improvement in fuel cell stability because current becomes limited by mass transport of dissolved gases rather than enzyme immobilization so that neither inactivation nor desorption of enzymes would influence the current output. Based on one type of 3D porous carbon electrodes, the maximum power density of enzyme-based membrane-less H2 fuel cells has increased to the mW•cm2 level by at least one order of magnitude and the half-life has also increased from several hours to one week. This thesis presents a method for the increase in power density otherwise limited by low cathodic currents due to meagre O2 in non-explosive H2-rich H2-air mixtures. The power density of enzyme-based membrane-less H2 fuel cells can be increased by re-proportioning cathode/anode geometric area ratio to balance the cathodic and anodic currents under such an unusual H2-air mixture. This thesis also demonstrates that the 3D porous carbon electrode can improve the apparent O2 tolerance of anodic catalysts – hydrogenases, which are very important for the fuel cell performance. The degrees of apparent O2 tolerance for both O2-tolerant and O2-sensitive [NiFe]-hydrogenases are greatly increased based on the 3D porous carbon electrodes, so that even an O2-sensitive [NiFe]-hydrogenase can be used as an anodic catalyst in the enzyme-based membrane-less H2 fuel cell under a non-explosive H2-rich H2-air mixture. This thesis presents a design of a test bed in which series and parallel connections of sandwich-like electrode stacks can be varied. The fuel cell test bed has demonstrated low-loss interconnects and efficient stack configuration. Operated under a non-explosive H2-air mixture containing only 4.6% O2 at 20 °C, the maximum volume power density of the fuel cell test bed exceeds 2 mW•cm3, capable of powering electronic gadgets, which is a good demonstration of electricity that originates from the buried active sites of enzymes and is transmitted by long-range electron hopping in accordance with Marcus theory.

Following the discovery of graphene, 2D nanostructures have been noted for their potential in a range of high-impact applications, such as sensing, catalysis, and composite reinforcement. Liquid-phase exfoliation and chemical vapour deposition have been demonstrated and indicate the feasibility of mass-scale production. With the advent of mass-produced 2D nanostructures a key focus of research is to characterise these materials. This thesis is concerned with imaging and structural properties of the 2D nanomaterials, hexagonal boron nitride (h-BN), molybdenum disulfide (MoS₂), tungsten disulfide (WS₂), titanium disulfide (TiS₂) and hexabenzocoronene (HBC), produced via liquid phase exfoliation. HBC strictly speaking is not 2D nanomaterial, however, it can be viewed as transition molecule from benzene to graphene. The data used for characterisation is based primarily on electron diffraction and, in particular, aberration corrected annular dark field (ADF) scanning transmission electron microscopy (STEM). The incoherent nature of ADF STEM provides direct atomic imaging without the contrast reversals upon focus changes seen in conventional high-resolution transmission electron microscopy (HRTEM). The main structural feature investigated in this thesis was the stacking sequences in few-layers h-BN, MoS₂, WS₂ and TiS₂. Simple stacking (AAA) can be distinguished from Bernal (ABA) and rhombohedral (ABC) on the basis of intensity ratio, I_{10̅10}/I_{11̅20} , in diffraction patterns and indirectly in HRTEM images. Nonetheless acquisition of the diffraction patterns suitable for analysis can be challenging due to the sample issues. Non-bulk stacking sequences were reliably confirmed for all above 2D nanomaterials on the basis of atomically resolved ADF STEM. 20 h-BN, 28 MoS₂, 5 WS₂ and 6 TiS₂ nanoflakes were imaged and analysed. Amongst them 2 h-BN, 9 MoS2, 4 WS2 and 1 TiS2 nanoflakes displayed non-bulk stacking. Hence, it appears that 2D WS2 has the greatest affinity for non-bulk stacking. Finally, an interesting structural transformation was observed in HBC molecules. Under the influence of electron beam HBC agglomerates were transformed into crystalline phase with 90^o symmetry.