Municipalities protect human health and environmental resources from impacts of urban natural gas drilling through setback distances; the regulation of distances between well sites and residences, freshwater wells, and other protected uses. Setback distances have increased over time, having the potential to alter the amount and geographical distribution of drillable land within a municipality, thereby having implications for future land use planning and increasing the potential for future incompatible land uses. This study geographically applies a range of setback distances to protected uses and freshwater wells in the city limits of Denton, Texas to investigate the effect on the amount of land remaining for future gas well development and production. Denton lies on the edge of a productive region of the Barnett Shale geological formation, coinciding with a large concentration of drillable land in the southwestern region of the study area. This region will have the greatest potential for impacts to future municipal development and land use planning as a result of future gas well development and higher setback standards. Given the relatively high acreage of drillable land in industrially zoned subcategory IC-G and the concern regarding gas well drilling in more populated areas, future drilling in IC-G, specifically in IC-G land cover classes mowed/grazed/agriculture and herbaceous, would have the least impact on residential uses and tree cover, as well as decreasing the potential for future incompatible land uses.

In order to better understand runoff characteristics from natural gas well sites in north central Texas, the City of Denton, with assistance through an EPA funded 104b3 Water Quality Cooperative Agreement, monitored storm water runoff from local natural gas well sites. Storm water runoff was found to contain high concentrations of total suspended solids (TSS). Observed TSS concentrations resulted in sediment loading rates that are similar to those observed from typical construction activities. Petroleum hydrocarbons, in contrast, were rarely detected in runoff samples. Heavy metals were detected in concentrations similar to those observed in typical urban runoff. However, the concentrations observed at the gas well sites were higher than those measured at nearby reference sites. Storm water runoff data collected from these sites were used to evaluate the effectiveness of the water erosion prediction project (WEPP) model for predicting runoff and sediment from these sites. Runoff and sediment predictions were adequate; however, rainfall simulation experiments were used to further characterize the portion of the site where drilling and extraction operations are performed, referred to as the "pad site." These experiments were used to develop specific pad site erosion parameters for the WEPP model. Finally, version 2 of the revised universal soil loss equation (RUSLE 2.0) was used to evaluate the efficiency of best management practices (BMPs) for natural gas well sites. BMP efficiency ratings, which ranged from 52 to 93%, were also evaluated in the context of site management goals and implementation cost, demonstrating a practical approach for managing soil loss and understanding the importance of selecting appropriate site-specific BMPs.