The theme of this work is design and check load-carrying steel structure of motor show in two variations. A given object is situated in Uherske Hradiste. The steel structure is created by two objects (main and adjoining), whose plans are partly overlaid. Main object has circular ground plan and adjoining object has rectangular ground plan. Building is two-storey. For analysis of internal forces, was constructed virtual spatial model, which was used for an optimization of partial bars for both limit states. The cladding will be made by system of roof panels Brollo and Rockwell. The wall facing will be glass wide, from isolation glasses Stavebni sklo and wall panels Brollo.

The theme of this thesis is the assessment of the prerequisites for the pluralism of law and non-state justice systems to improve the possibilities of solving disputes in society. The main research question is whether non-state justice systems fulfil a social role in providing justice. The thesis should offer a descriptive analysis of the concept of legal pluralism and methodological procedures for the inclusion of non-state justice systems in the state. The outcome of the work should be an overview of the possibilities of interaction between different legal systems, whether formal or customary, of the different ways of resolving disputes in this environment, and of the contribution of such proposals to the reform of the legal environment that count on the real situation in society. The thesis of procedural pluralism and participatory methods of solving disputes that have a user, a citizen in the center of these systems is offered as a starting point for new designs. The final part of the work will therefore explore current approaches to improving legal systems that aim to increase participation of user based on their needs, and will include some cases for comparing individual programs to improve legal systems.

This diploma thesis is focused on the design of a product family of portable veterinary x-ray generators. The thesis deals with the possibilities of using parameterization when designing products which are part of a product series. The main body of the thesis lies in the design of a parametric script which generates variations of portable veterinary x-ray generators depending on the size and position of the inner components. The outer surfaces are defined by algorithms from the input parameters. It is possible to alter the individual attributes (e.g. the progresion of curves, the dimensions of component parts and the proportions between the individual parts). The output from the parametric script is three size-variations of the product.

The aim of this diploma thesis is to revitalize the selected type of panel house in the selected locality in order to meet the standards of international certification for the design and sustainable construction of buildings. First, the thesis analyzes the chronological development of the panel housing estates in Brno and compares the individual structural systems that were historically used for panel construction in Brno. Furthermore, the most used certification methodologies are compared and a specific certification is selected for next simulation. The chapter called solution is focused on performing a simulated certification process for design and sustainable construction of selected panel building, in three phases of its revitalization. The hypotheses describing the individual phases of revitalization are intended to confirm or disprove the achievement of this objective, moreover to say the extent of revitalization that has to be done in order to achieve our goals.

The assignment of my degree work was a proposal of two variants of the steel structure of a modern art exhibition hall. The ground plan dimensions of the structure are 52,5 x 24 m. The whole structure of the two variants is supported by two quadrilateral truss columns and the upper floor level is at a height of 8 m above the ground. The ceiling structure is set by the truss girders. The proposal of two alternative solutions and the assessment of the main structure support elements forms another part of the work. With a winning option then a solution of the selected details, working out of the detailed drawings of the solved joints and the creation of the workshop documentation of the selected parts is supposed.

There is ussualy used the Masopust's method to assessment the piles in Czech Republic. This method is based on statistical processing of large data set of load piles tests. Due to the using of regression coefficients this method is relatively complicated and not very transparent. Instead, foreign standards ussualy use direct the values of limit stress on the base of piles and unit friction capacity. Procedure for determining the bearing capacity of the piles is thus considerably simplified. In this thesis the Masopust's method is compared with the methods used in Germany and Austria. This comparison provides insight to the safety level that include various approaches.

The Master’s thesis is focused on low-noise asphalt mixtures in general, namely asphalt concrete for very thin layers with low noise (BBTM 8 NH) and stone mastic asphalt with low noise (SMA 8 NH). The first half of the thesis describes basic types of asphalt mixtures with low noise, requirements for raw materials (aggregates and asphalt), noise emissions and their measurement methods. The second part deals the design of BBTM 8 NH and SMA 8 NH so that they have the same voids. Subsequently, their parameters were tested. Acoustic absorption, resistence against permanent deformation and stiffness. Test methods are described and evaluated.

The thesis includes diagnostics temperature field of industrial low voltage. Place of origin, flow and heat transfer are important aspects in the design of the switchgear, especially in terms of proper equipment layout. The correctness of the design of the switchgear is verified by measuring the practical temperature field during testing or in work mode. To determine the temperature profile, it is necessary to measure the temperature at various points of the switchgear, either contact or contactless method. Measurements are performed on standardized low voltage switchboards, which are located power elements. The goal is to replace costly and time-consuming field testing switchgear efficient simulation of the temperature field mathematical model developed switchboards.

The theme of this diploma thesis is design and check load-carrying steel structure of building for sport purposes in two variants. Building is situated in Holešov town. Primary emphasis is placed on purpose of this building and on her integration to the given locality. The steel structure is created by two objels, main (hall) and side part (admin. part). Both of this building have common east wall. Plan dimension of hall part is 40 on 40m and the highest point of this part is 15,9m height above ground. Admin. part is greated like frame with columns in 8x8m grid and 8m height. Overall height of this part is 8m. For analisys of internal forces was constructed spatial bar model which was used for an optimization of partial bars for both limit states. The cladding will be made by system of Kingspan panels.

Today’s ZOO is varied mosaic of buildings and elements in the whole typological scale. Czech republic is country with affluent history and proceeded structure today‘s zoological gardens and parcs. But comprehensive draft view of solue problems is missing. This thesis has next basic objectives: Carry out value historical development of coexistence man and animals, constructions of ZOO gardens and today’s condition. a) apply systematical categorization of ZOO buildings with accent for complex expositions of ecosystems pavilions. b) analyse basic today’s principles of design ZOO buildings with a view to pavilions of ecosystems. c) produce comprehensive document like data for architectural practice and for education of new architect – specialist. This paper will serve for education too. That is why presentation of describe principles on the real example from own practice and on the school designs from my classes is attach. The basic task, which follow from objective of the thesis, is definition of principles for design of ecosystems pavilions, like top representative of ZOO exposition buildings. It is definition of basic character, description of general and specific principles above all.