Air is one of the most important resources in the world and is essential for life. With the development of industry, air pollution is becoming a severe problem. Air Pollution not only affects the quality of the air we breathe; it also impacts the land and the water. Volatile organic compounds (VOCs), which can cause short-term and long-term health problems, are found as contaminants in both indoor air and the environment. Therefore, it is necessary to develop accurate and convenient sampling methods to determine VOCs at trace levels in both community and occupational environment. The focus of this project is to develop the needle trap devices (NTDs) with appropriate sorbents and employ them to do air samplings by diffusive or active sampling mode. For diffusive sampling, the NTD with sorbent Carboxen1000 was developed to monitor benzene, toluene, ethylbenzene and o-xylene (BTEX) in the air, coupled with GC-MS. The factors such as sorbent strength, response time, face velocity, temperature and pressure, relative humidity and sampling duration were investigated. Method validations were done both in the laboratory and in field. The results demonstrate that the NTD with Carboxen1000 is a successful diffusive sampler for monitoring Time-weighted average (TWA) concentrations of BTEX. On the other hand, the NTD with divinylbenzene (DVB) coupled with GC-MS by thermal desorption was developed for sampling and analysis of volatile thiols. The factors such as sorbent strength, desorption efficiency were investigated. The applications, such as vegetable analysis and field sampling analysis, indicate that the NTD with sorbent DVB is a successful active sampler for determine volatile thiols in food and air samples.

Air is one of the most important resources in the world and is essential for life. With the development of industry, air pollution is becoming a severe problem. Air Pollution not only affects the quality of the air we breathe; it also impacts the land and the water. Volatile organic compounds (VOCs), which can cause short-term and long-term health problems, are found as contaminants in both indoor air and the environment. Therefore, it is necessary to develop accurate and convenient sampling methods to determine VOCs at trace levels in both community and occupational environment. The focus of this project is to develop the needle trap devices (NTDs) with appropriate sorbents and employ them to do air samplings by diffusive or active sampling mode. For diffusive sampling, the NTD with sorbent Carboxen1000 was developed to monitor benzene, toluene, ethylbenzene and o-xylene (BTEX) in the air, coupled with GC-MS. The factors such as sorbent strength, response time, face velocity, temperature and pressure, relative humidity and sampling duration were investigated. Method validations were done both in the laboratory and in field. The results demonstrate that the NTD with Carboxen1000 is a successful diffusive sampler for monitoring Time-weighted average (TWA) concentrations of BTEX. On the other hand, the NTD with divinylbenzene (DVB) coupled with GC-MS by thermal desorption was developed for sampling and analysis of volatile thiols. The factors such as sorbent strength, desorption efficiency were investigated. The applications, such as vegetable analysis and field sampling analysis, indicate that the NTD with sorbent DVB is a successful active sampler for determine volatile thiols in food and air samples.

Needle trap device (NTD) is a technique that is useful for a wide variety of applications involving the sample preparation of compounds with a wide range of chemico-physico properties, and varying volatilities. A newly designed NTD that improves the performance relative to previous NTD designs is simple to produce is developed. The NTD utilizes a side-hole needle with a modified tip to improve the sealing between the NTD and narrow neck liner of the GC injector, thereby increasing the desorption efficiency. The slurry packing method was applied, evaluated, and NTDs prepared by this method were compared to NTDs prepared using the vacuum aspiration method. NTD geometries including blunt tip with a side-hole needle, tapered tip with side-hole needle, dome tapered tip with side-hole, sliding tip with side-hole and blunt tip with no side-hole needle (expanded desorptive flow) were prepared and evaluated. Sampling performance and desorption efficiency were investigated using automated headspace extraction of benzene, toluene, ethylbenzene, p¬-xylene (BTEX), anthracene and pyrene. The tapered tip and sliding tip NTDs were found to have increased desorption efficiency. SPME and NTDs are valuable sample preparation tools for on-site analysis. Combining both extraction techniques allows for the differentiation of free and particle-bound compounds in a sample matrix. Portable GC/MS instrumentation can achieve fast separation, identification, and quantitation of samples prepared by the above techniques on-site without the need for transport to the laboratory. This minimizes the effects of volatiles lost and sample degradation during storage time. Here, SPME and tapered tip NTDs combined with portable GC/MS are used to investigate free and total emissions of BTEX and select PAHs from gasoline and diesel exhaust. Using the above optimized technologies, cigarette smoke in a smoking area where people were actively smoking and inside a smoker’s car were also investigated. Target contaminants were found in the investigated matrices at ng/mL levels.

Needle trap device (NTD) is a technique that is useful for a wide variety of applications involving the sample preparation of compounds with a wide range of chemico-physico properties, and varying volatilities. A newly designed NTD that improves the performance relative to previous NTD designs is simple to produce is developed. The NTD utilizes a side-hole needle with a modified tip to improve the sealing between the NTD and narrow neck liner of the GC injector, thereby increasing the desorption efficiency. The slurry packing method was applied, evaluated, and NTDs prepared by this method were compared to NTDs prepared using the vacuum aspiration method. NTD geometries including blunt tip with a side-hole needle, tapered tip with side-hole needle, dome tapered tip with side-hole, sliding tip with side-hole and blunt tip with no side-hole needle (expanded desorptive flow) were prepared and evaluated. Sampling performance and desorption efficiency were investigated using automated headspace extraction of benzene, toluene, ethylbenzene, p¬-xylene (BTEX), anthracene and pyrene. The tapered tip and sliding tip NTDs were found to have increased desorption efficiency. SPME and NTDs are valuable sample preparation tools for on-site analysis. Combining both extraction techniques allows for the differentiation of free and particle-bound compounds in a sample matrix. Portable GC/MS instrumentation can achieve fast separation, identification, and quantitation of samples prepared by the above techniques on-site without the need for transport to the laboratory. This minimizes the effects of volatiles lost and sample degradation during storage time. Here, SPME and tapered tip NTDs combined with portable GC/MS are used to investigate free and total emissions of BTEX and select PAHs from gasoline and diesel exhaust. Using the above optimized technologies, cigarette smoke in a smoking area where people were actively smoking and inside a smoker’s car were also investigated. Target contaminants were found in the investigated matrices at ng/mL levels.

Various needle trap devices (NTDs) with different designs for different applications have been developed during the past decade. A theoretical model on the fundamentals of the NTD was recently proposed, which employed the theory of frontal (gas-solid) chromatography to describe the sampling process, where a gaseous sample was continuously introduced into the sorbent bed. In this investigation, different types of sorbent particles with different dimensions were packed into the needle as adsorbents. The effect of particle dimension, which would affect the packing density and consequently the capacity, the extraction efficiency, and desorption efficiency of the NTD were experimentally investigated and the proposed theory was validated. The results demonstrated that NTDs packed with small particles possess higher extraction capacity and efficiency but much higher resistance to flow as well. The higher resistance did not necessarily result in poor desorption efficiency, because desorption efficiency was affected by both the sorbent bed structure and the desorption gas flow. The relationships observed among those physical parameters provide valuable guidance on how to design an NTD with high performance potential for future applications. For particulate sampling, it was found that NTDs packed with different particles presented high collection efficiency of the particulates being investigated, and the collection efficiency was dominated by the pore size and distribution of the sorbent bed packed inside the needle. Collection efficiency also increased with increase in solidity of the sorbent bed; the increase in humidity of the aerosol sample; and the decrease of sampling rate. The results also provide valuable guidance on the optimisation of needle trap for particulate collection.

Various needle trap devices (NTDs) with different designs for different applications have been developed during the past decade. A theoretical model on the fundamentals of the NTD was recently proposed, which employed the theory of frontal (gas-solid) chromatography to describe the sampling process, where a gaseous sample was continuously introduced into the sorbent bed. In this investigation, different types of sorbent particles with different dimensions were packed into the needle as adsorbents. The effect of particle dimension, which would affect the packing density and consequently the capacity, the extraction efficiency, and desorption efficiency of the NTD were experimentally investigated and the proposed theory was validated. The results demonstrated that NTDs packed with small particles possess higher extraction capacity and efficiency but much higher resistance to flow as well. The higher resistance did not necessarily result in poor desorption efficiency, because desorption efficiency was affected by both the sorbent bed structure and the desorption gas flow. The relationships observed among those physical parameters provide valuable guidance on how to design an NTD with high performance potential for future applications. For particulate sampling, it was found that NTDs packed with different particles presented high collection efficiency of the particulates being investigated, and the collection efficiency was dominated by the pore size and distribution of the sorbent bed packed inside the needle. Collection efficiency also increased with increase in solidity of the sorbent bed; the increase in humidity of the aerosol sample; and the decrease of sampling rate. The results also provide valuable guidance on the optimisation of needle trap for particulate collection.

Solid phase microextraction (SPME), needle trap device (NTD), and membrane extraction with a sorbent interface (MESI) are solvent-free sample preparation techniques that were developed to perform the rapid routine analysis of organic compounds (VOCs) in various environmental matrices by integrating sampling, extraction, preconcentration and sample introduction procedures into one step. A portable ion mobility spectrometry (IMS) analyzer has some advantages, such as small size, light weight, operability under ambient pressure, air as carrier gas, and sensitivity, all of which make IMS suitable for on-site monitoring for low concentration of analytes. The aforementioned sampling and preconcentration techniques were coupled with a portable IMS analyzer, as well as a thermal desorption unit that can accommodate SPME, NTD and MESI, which was modified and combined with IMS for on-site monitoring of volatile organic compounds (VOCs) from human breath and plant emissions. Experimental results demonstrated that low detection limits were achievable for gaseous analytes, (25 ng/L for acetone (SPME-IMS), 43 ng/mL (NTD-IMS) and 2.3 ng/mL (MESI-IMS) for α-pinene). These three analytical systems were applied for on-site rapid determination of acetone in human breath and α-pinene from plant emissions respectively. The salient features of these systems that make them suitable for on-site monitoring of volatile organic compounds in different sources are: small size, simple operation, fast and/or on-line sampling, rapid analysis.

Solid phase microextraction (SPME), needle trap device (NTD), and membrane extraction with a sorbent interface (MESI) are solvent-free sample preparation techniques that were developed to perform the rapid routine analysis of organic compounds (VOCs) in various environmental matrices by integrating sampling, extraction, preconcentration and sample introduction procedures into one step. A portable ion mobility spectrometry (IMS) analyzer has some advantages, such as small size, light weight, operability under ambient pressure, air as carrier gas, and sensitivity, all of which make IMS suitable for on-site monitoring for low concentration of analytes. The aforementioned sampling and preconcentration techniques were coupled with a portable IMS analyzer, as well as a thermal desorption unit that can accommodate SPME, NTD and MESI, which was modified and combined with IMS for on-site monitoring of volatile organic compounds (VOCs) from human breath and plant emissions. Experimental results demonstrated that low detection limits were achievable for gaseous analytes, (25 ng/L for acetone (SPME-IMS), 43 ng/mL (NTD-IMS) and 2.3 ng/mL (MESI-IMS) for α-pinene). These three analytical systems were applied for on-site rapid determination of acetone in human breath and α-pinene from plant emissions respectively. The salient features of these systems that make them suitable for on-site monitoring of volatile organic compounds in different sources are: small size, simple operation, fast and/or on-line sampling, rapid analysis.