Spelling suggestions: "subject:"nonwood"" "subject:"goodwood""
201 |
New approaches to wood quality assessmentSharma, Monika January 2013 (has links)
This study approaches wood quality in young trees by very early screening – and consequent selection for propagation – on the basis of physical and mechanical properties.
In chapter 1 corewood properties are reviewed and the importance and problems associated with early screening are discussed. Due to randomly distributed reaction wood in young trees it is advantageous to lean trees to avoid intermixing of the two wood types and minimise any uncertainty in the results.
In chapter 2 physical and mechanical properties are described for opposite and compression wood in a population of Pinus radiata comprising of 50 families, at a young (<3 years) age. The dynamic stiffness was determined using the resonance acoustic technique. Density was measured using water displacement method, and longitudinal and volumetric shrinkage were measured from green to ~5% moisture content. The compression wood and opposite wood differ significantly in all the measured properties. Compression wood was characterised by high density and high longitudinal shrinkage. The mean stiffness of opposite wood was 3.0 GPa with a mean standard deviation of 0.39, and the mean longitudinal shrinkage of opposite wood was 0.99% with mean standard deviation of 0.31 across the samples examined. This variation in stiffness and longitudinal shrinkage in opposite wood can be exploited to screen for wood quality. The variation in stiffness and longitudinal shrinkage within a family was comparable to variation among families. In spite of large within site variability it was possible to distinguish between the worst and the best families in opposite wood at young age.
In chapter 3 ranking of selected families of Pinus radiata was done based on microfibril angle, which is considered as the main factor influencing both stiffness and longitudinal shrinkage. The ranking was compared with ranking done using acoustic velocity which is more practical and fast method of screening trees. The mean MFA in opposite wood was 39° with a mean standard deviation of 3.7 and in compression wood the mean MFA was 44° with a mean standard deviation of 2.9. The variation in MFA in opposite wood offers opportunities to breed for trees with low MFA. A strong negative correlation (R=-0.68) between acoustic velocity squared and MFA in opposite wood suggested that the resonance technique can be used effectively to screen very young wood rather than using MFA.
At high MFA, the cell wall matrix also plays an important role in determining the mechanical and physical properties of the wood. At present the chemical composition of wood samples is determined by wet chemical analysis, which is time consuming and laborious. Therefore, it is impractical to characterise large numbers of samples. Mechanical properties, particularly tanδ (dissipation of energy), which changes with temperature and frequency as the structure of the material changes at the molecular level, was studied using dynamic mechanical analysis (DMA). The idea was to assess if it can be used as a quality trait for tree screening instead of wet chemical analysis. Compression wood and opposite wood were characterised for storage modulus and tanδ at constant moisture content. In practice the instrument used, TA instrument Q800, was unable to provide the desired range of temperature and humidity so no glass transition at 9% moisture content in the temperature range of 10°C to 85°C at 1 and 10 Hz frequency was observed that might be attributed to the hemicelluloses (or lignin). In spite of the huge difference in chemical composition of opposite and compression wood, the difference in their mean tanδ at 25°C and 1 Hz values was just 7%. The positive correlation between MFA and tanδ in opposite wood suggested that MFA also plays a role in the dissipation of energy. The strong relationship between storage modulus and dynamic modulus (R=0.74) again justifies the reliability of resonance technique to screen young wood for stiffness.
Concurrently eighty seven, two-year-old leant Eucalyptus regnans were studied for growth strains along with other physical and mechanical properties, independently in tension and opposite wood. The leant trees in Eucalyptus regnans vary in their average growth strain. Strong correlation between measured and calculated strain (R=0.93) suggests that the quick split method can be used to screen large populations for growth stresses. Tension wood was characterised by high density and was three times stiffer than opposite wood and twice as high in volumetric shrinkage. The high longitudinal shrinkage in opposite wood could be due to comparatively high MFAs in opposite wood of the young trees. There was no correlation between growth strain values and other measured properties in opposite wood. It is possible to screen for growth strain at age two, without any adverse effect on stiffness and shrinkage properties.
|
202 |
Use of biological agents to enhance the preservative treatment of electrical distribution polesPhilp, Rodger William January 1998 (has links)
No description available.
|
203 |
Molecular analysis of wet rot organisms : application to conservation of maritime artifactsMcDowell, Helen Elizabeth January 1992 (has links)
No description available.
|
204 |
Microhabitat ecology of small mammals on grassy road vergesGarland, Lincoln January 2002 (has links)
No description available.
|
205 |
Studies on Trametes species occurring in the indigenous forests of ZimbabweMswaka, Allen Yvon January 1994 (has links)
No description available.
|
206 |
Evaluation of wood-based energy technologies and the options for wood in KenyaMichaelis, L. A. January 1986 (has links)
No description available.
|
207 |
CULTURAL AND OTHER STUDIES ON THE SPECIES OF FOMITOPSIS WITH ROSE-COLORED CONTEXT (FUNGI, DECAY, BROWN ROTS, POLYPORES, SEXUALITY).Carranza, Julieta Velazquez January 1985 (has links)
The inclusion of the species of polypores with rose-colored context in the genus Fomitopsis is proposed in this study. Temperature responses demonstrated that these fungi can be placed in three groups according to their optimum temperature for growth: (1) Fungi with an optimum at 25 C, Fomitopsis rosea; (2) Fungi with an optimum at 28 C, Fomitopsis feei, Fomitopsis lilacino-gilva, Fomitopsis cajanderi, and Fomitopsis carnea; (3) Fungi with an optimum at 30-34 C, Fomitopsis dochmius, F. cajanderi, and Fomitopsis cupreo-rosea. Decay tests showed that Fomitopsis feei and Fomitopsis lilacino-gilva reported only on hardwoods are also capable of decaying conifers "in vitro", causing weight losses up to 40% after 20 weeks. It was confirmed that all these fungi were brown rotters. An heterothallic, bipolar behavior was demonstrated for F. feei and agreed with the behavior previously reported for two other members on this complex, F. rosea and F. cajanderi. Due to the failure of the other isolates to fruit in culture, their sexual behavior could not be determined. Monokaryotic x monokaryotic pairings and monokaryotic x dikaryotic pairings showed homogenic or heterogenic incompatibility between members of the same species or different species. Vegetative incompatibility was found when pairing heterokaryotic dikaryons of different isolates of the same species which demonstrated genetic diversity in the populations. Dikaryotization did not occur when heterokaryotic dikaryons of F. lilacino-gilva, F. dochmius, F. carnea, and F. cupreo-rosea were paired with monokaryons of F. feei, F. cajanderi, or F. rosea which supported the concept of genetically different species.
|
208 |
Xylanolytic enzymes of Ceraceomyces sublaevisMcKenna, Ellen Margaret January 1993 (has links)
No description available.
|
209 |
A study of the physiology of wood inhabiting fungi with regard to oxygen potential and moisture contentKazemi Sheikh Shabani, Seyed Mahmoud January 1997 (has links)
No description available.
|
210 |
An investigation into the mechanism of degradation of domestic coatings for the protection of woodMower, Keith Graham January 1999 (has links)
No description available.
|
Page generated in 0.0407 seconds