1 |
Hybrid Geometric Feedback Control of Three-Dimensional Bipedal Robotic Walkers with Knees and FeetSinnet, Ryan Wesley 2011 May 1900 (has links)
This thesis poses a feedback control method for obtaining humanlike bipedal walking on a human-inspired hybrid biped model. The end goal was to understand better the fundamental mechanisms that underlie bipedal walking in the hopes that this newfound understanding will facilitate better mechanical and control design for
bipedal robots. Bipedal walking is hybrid in nature, characterized by periodic contact between a robot and the environment, i.e., the ground. Dynamic models derived from Lagrangians modeling mechanical systems govern the continuous dynamics while discrete dynamics were handed by an impact model using impulse-like forces and balancing angular momentum. This combination of continuous and discrete dynamics motivated the use of hybrid systems for modeling purposes.
The framework of hybrid systems was used to model three-dimensional bipedal walking in a general setup for a robotic model with a hip, knees, and feet with the goal of obtaining stable walking. To achieve three-dimensional walking, functional Routhian reduction was used to decouple the sagittal and coronal dynamics. By doing so, it was possible to achieve walking in the two-dimensional sagittal plane on the three-dimensional model, restricted to operate in the sagittal plane. Imposing this restriction resulted in a reduced-order model, referred to as the sagittally-restricted model. Sagittal control in the form of controlled symmetries and additional control strategies was used to achieve stable walking on the sagittally-restricted model. Functional Routhian reduction was then applied to the full-order system. The sagittal control developed on the reduced-order model was used with reduction to achieve walking in three dimensions in simulation.
The control schemes described resulted in walking which was remarkably anthropomorphic in nature. This observation is surprising given the simplistic nature
of the controllers used. Moreover, the two-dimensional and three-dimensional dynamics were completely decoupled inasmuch as the dynamic models governing the sagittal motion were equivalent. Additionally, the reduction resulted in swaying in the lateral plane. This motion, which is generally present in human walking, was unplanned
and was a side-effect of the decoupling process. Despite the approximate nature of the reduction, the motion was still almost completely decoupled with respect to the sagittal and coronal planes.
|
2 |
Developing Active Artificial Hair Cell Sensors Inspired by the Cochlear AmplifierDavaria, Sheyda 26 January 2021 (has links)
The mammalian cochlea has been the inspiration to develope contemporary cochlear implants and active dynamic sensors that operate in the sensor's resonance region and possess favorable nonlinear characteristics. In the present work, multi-channel and self-sensing active artificial hair cells (AHCs) made of piezoelectric cantilevers and controlled by a cubic damping feedback controller are developed numerically and experimentally. These novel AHCs function near a Hopf bifurcation and amplify or compress the output by a one-third power-law relationship with the input, analogous to the mammalian cochlear amplifier. The multi-channel AHCs have extended frequency bandwidth to sense over multiple resonant frequencies, unlike conventional single-channel AHCs. Therefore, the adoption of these AHCs reduces the number of required sensors to cover the desired bandwidth of interest in an array format. Furthermore, a novel self-sensing active AHC is created in this study using quadmorph beams for future cochlear implants or sensor design applications. The self-sensing scheme allows miniaturization of the system, embedding AHCs in a limited space, and fabrication of AHC arrays by omitting external sensors from the system for practical implementation. Preliminary research on the extension of this research to MEMS AHCs and arrays of AHCs is also presented. The active AHCs can lead to transformative improvements in the dynamic range, sharpness of the response, and threshold of sound detection in cochlear implants to aid individuals with sensorineural hearing loss. Additionally, they can enhance the dynamic properties of sensors such as fluid flow sensors, microphones, and vibration sensors for various applications. / Doctor of Philosophy / In the mammalian auditory system, the acoustic wave that enters the ear canal is transmitted to the cochlea of the inner ear where it is decomposed into its frequency components. The cochlea then amplifies faint sounds and compresses high-level signals and as these processes stop due to damage, severe hearing loss occurs. Therefore, the present work is focused on developing artificial hair cells (AHCs) that can accurately replicate cochlea's behavior and aid the creation of prostheses for hearing restoration. In this work, the AHC is a beam with piezoelectric layers that is integrated with a control system designed to apply the cochlea-like amplification/compression on the beam. Experimental and simulation results show that the AHC is able to amplify or compress the output based on its input level similar to the mammalian cochlea. In contrast to previous designs of AHCs where each AHC could sense a single frequency, the system developed in this work possesses multiple sensing channels to increase the frequency range of the AHC. Furthermore, the development of a novel self-sensing scheme allows the omission of the external sensor that was required for the AHC operation in previous devices. This advancement in the self-sensing AHC design paves the way for creating fully implantable AHCs to replace the damaged parts of the cochlea. These multi-channel self-sensing AHCs have the potential to be used in the creation of cochlear implants, or sensors such as accelerometers, microphones, and hydrophones with improved dynamic properties. AHCs with different lengths, i.e. different sensing frequencies, can be mounted in an array format to cover the speech frequency range for speech recognition in individuals with hearing loss.
|
3 |
Methods for improving crane performance and ease of usePeng, Chen-Chih 13 January 2014 (has links)
Cranes are widely used in material-handling and transportation applications, e.g. in shipyards, construction sites, and warehouses. As they are critical to the economic vitality of modern-day industries, improving crane performance and ease of use are important contributors to industrial productivity, low production costs, and workplace safety.
In a typical crane operation, a payload is lifted, moved to its destination, and then lowered into place. This dissertation aims to improve crane performance and reduce task difficulty for the human operator in the movements mentioned above, namely: 1) Moving payloads laterally in the horizontal plane, 2) Lifting payloads off the ground, and 3) Lowering or laying down payloads on the ground.
The design of a novel and intuitive human-machine control interface is the focus for improving operations that involve moving payloads laterally. The interface allows operators to drive a crane by simply moving a hand-held device through the desired path. The position of the device, which is tracked by sensors, is used to generate command signals to drive the crane. This command is then input-shaped such that payload oscillations are greatly reduced, making it much easier for the operator to drive the crane. Several facets of this crane control method are examined, such as control structure and stability, usability contexts, modes of operation, and quantitative measures (by means of human operator studies) of performance improvements over standard crane control interfaces.
Lifting up a payload can be difficult for the operator, if the hoist is not properly centered above the payload. In these potentially dangerous and costly ``off-centered" lifts, the payload may slide on the ground and/or oscillate in the air after it is hoisted. Newtonian and Coulomb friction models that focus on the stiction-sliding-separation contact dynamics are derived and experimentally verified to study off-centered lifts. Then, with the goal of aiding operators during lift operations, simple but practical, self-centering solutions are proposed and implemented.
Laying down or lowering a payload to the ground can also be challenging for operators in certain situations. For example, laying down a long, slender payload from a vertical orientation in the air, to a horizontal position on a flat surface. If the operator does not properly coordinate the motions of the crane in the vertical and horizontal directions simultaneously, then the potential hazards that may occur during these operations include: 1) slipping of the pivot about which the payload rotates, leading to sudden and dangerous payload movements; and 2) excessive hoist cable angles that lead to ``side-pull" problems. Newtonian and Coulomb friction models are derived to describe this lay-down scenario. The forces and motions experienced by the payload are then used to determine the motion trajectories that the crane and payload should follow to execute a successful lay-down maneuver.
Finally, a special chapter is included to address the oscillation control of systems that have on-off nonlinear actuators, such as cranes powered by relay-controlled circuits. Due to their simplicity, ruggedness, and long service life, this type of crane can be commonly found in older factories or in applications where precise motion control is not a strict requirement. However, controlling payload oscillations on this type of crane is challenging for two reasons: 1) Relays that can only be turned on or off allow for only limited control over the crane velocity; and 2) These cranes typically have nonlinear asymmetrical acceleration and deceleration properties. Methods are derived for determining the relay switch-times that move single-pendulum and double-pendulum payloads with low residual oscillations.
|
Page generated in 0.0654 seconds