Over the past decade, advances in ethylene oligomerization have witnessed explosive growth of interest from both commercial and academic standpoint, with chromium metal invariably being the metal of preference. A common feature in this literature was the extended long debate regarding the mechanism, metal oxidation states responsible for selectivity and the role of the ligand. This thesis work embarked on the isolation and characterization of new active intermediates called “single component catalysts” (or self activating) to address two important questions: (1) how the catalyst precursors re-arrange upon activation and (2) the real oxidation state of the activated species. Four different ligands systems have been examined for this purpose. The first part is a study on the NPIIIN ligand which can be described as a dynamic and non-spectator ligand. Upon aluminum alkyl activation, a series of single component chromium catalysts for selective ethylene oligomerization and polymerization have been isolated, fully characterized and tested. New selective single component chromium(I) catalysts have also been isolated and tested positively for ethylene trimerization. The second part includes a new series of chromium complexes based on the NPVN ligand. This ligands enabled to obtain the first polymer-free extremely active catalytic system. In both NPN ligand systems, a new activation pathway was discovered by using vinyl Grignard reagent [(CH2=CH)MgCl] as activator and/or reducing agent. The third part explores new modified pyrrole-chromium complexes which were found to be highly active and selective ethylene trimerization catalysts. This part was a continuation of previous work from our lab to complete the mechanistic picture of this highly successful pyrrole-chromium catalyst independently commercialized by Phillips-Chevron and Mitsubishi. Interestingly upon aluminum alkyl treatment, the first example of a Schrock-type chromium ethylidene complex has been isolated and characterized and found to be a potent catalyst for selective ethylene trimerization. Finally, the other ligands introduced in this thesis are new systems called pyridine-SNS and Si-SNS that introduce some modification to the known commercial SNS catalyst (Sasol technology). The introduction of a pyridine ring or a silyl unit in the ligand scaffold has allowed to understand the mechanism of action of this remarkable system.

Over the past decade, advances in ethylene oligomerization have witnessed explosive growth of interest from both commercial and academic standpoint, with chromium metal invariably being the metal of preference. A common feature in this literature was the extended long debate regarding the mechanism, metal oxidation states responsible for selectivity and the role of the ligand. This thesis work embarked on the isolation and characterization of new active intermediates called “single component catalysts” (or self activating) to address two important questions: (1) how the catalyst precursors re-arrange upon activation and (2) the real oxidation state of the activated species. Four different ligands systems have been examined for this purpose. The first part is a study on the NPIIIN ligand which can be described as a dynamic and non-spectator ligand. Upon aluminum alkyl activation, a series of single component chromium catalysts for selective ethylene oligomerization and polymerization have been isolated, fully characterized and tested. New selective single component chromium(I) catalysts have also been isolated and tested positively for ethylene trimerization. The second part includes a new series of chromium complexes based on the NPVN ligand. This ligands enabled to obtain the first polymer-free extremely active catalytic system. In both NPN ligand systems, a new activation pathway was discovered by using vinyl Grignard reagent [(CH2=CH)MgCl] as activator and/or reducing agent. The third part explores new modified pyrrole-chromium complexes which were found to be highly active and selective ethylene trimerization catalysts. This part was a continuation of previous work from our lab to complete the mechanistic picture of this highly successful pyrrole-chromium catalyst independently commercialized by Phillips-Chevron and Mitsubishi. Interestingly upon aluminum alkyl treatment, the first example of a Schrock-type chromium ethylidene complex has been isolated and characterized and found to be a potent catalyst for selective ethylene trimerization. Finally, the other ligands introduced in this thesis are new systems called pyridine-SNS and Si-SNS that introduce some modification to the known commercial SNS catalyst (Sasol technology). The introduction of a pyridine ring or a silyl unit in the ligand scaffold has allowed to understand the mechanism of action of this remarkable system.

Over the past decade, advances in ethylene oligomerization have witnessed explosive growth of interest from both commercial and academic standpoint, with chromium metal invariably being the metal of preference. A common feature in this literature was the extended long debate regarding the mechanism, metal oxidation states responsible for selectivity and the role of the ligand. This thesis work embarked on the isolation and characterization of new active intermediates called “single component catalysts” (or self activating) to address two important questions: (1) how the catalyst precursors re-arrange upon activation and (2) the real oxidation state of the activated species. Four different ligands systems have been examined for this purpose. The first part is a study on the NPIIIN ligand which can be described as a dynamic and non-spectator ligand. Upon aluminum alkyl activation, a series of single component chromium catalysts for selective ethylene oligomerization and polymerization have been isolated, fully characterized and tested. New selective single component chromium(I) catalysts have also been isolated and tested positively for ethylene trimerization. The second part includes a new series of chromium complexes based on the NPVN ligand. This ligands enabled to obtain the first polymer-free extremely active catalytic system. In both NPN ligand systems, a new activation pathway was discovered by using vinyl Grignard reagent [(CH2=CH)MgCl] as activator and/or reducing agent. The third part explores new modified pyrrole-chromium complexes which were found to be highly active and selective ethylene trimerization catalysts. This part was a continuation of previous work from our lab to complete the mechanistic picture of this highly successful pyrrole-chromium catalyst independently commercialized by Phillips-Chevron and Mitsubishi. Interestingly upon aluminum alkyl treatment, the first example of a Schrock-type chromium ethylidene complex has been isolated and characterized and found to be a potent catalyst for selective ethylene trimerization. Finally, the other ligands introduced in this thesis are new systems called pyridine-SNS and Si-SNS that introduce some modification to the known commercial SNS catalyst (Sasol technology). The introduction of a pyridine ring or a silyl unit in the ligand scaffold has allowed to understand the mechanism of action of this remarkable system.

No description available.

Over the past decade, advances in ethylene oligomerization have witnessed explosive growth of interest from both commercial and academic standpoint, with chromium metal invariably being the metal of preference. A common feature in this literature was the extended long debate regarding the mechanism, metal oxidation states responsible for selectivity and the role of the ligand. This thesis work embarked on the isolation and characterization of new active intermediates called “single component catalysts” (or self activating) to address two important questions: (1) how the catalyst precursors re-arrange upon activation and (2) the real oxidation state of the activated species. Four different ligands systems have been examined for this purpose. The first part is a study on the NPIIIN ligand which can be described as a dynamic and non-spectator ligand. Upon aluminum alkyl activation, a series of single component chromium catalysts for selective ethylene oligomerization and polymerization have been isolated, fully characterized and tested. New selective single component chromium(I) catalysts have also been isolated and tested positively for ethylene trimerization. The second part includes a new series of chromium complexes based on the NPVN ligand. This ligands enabled to obtain the first polymer-free extremely active catalytic system. In both NPN ligand systems, a new activation pathway was discovered by using vinyl Grignard reagent [(CH2=CH)MgCl] as activator and/or reducing agent. The third part explores new modified pyrrole-chromium complexes which were found to be highly active and selective ethylene trimerization catalysts. This part was a continuation of previous work from our lab to complete the mechanistic picture of this highly successful pyrrole-chromium catalyst independently commercialized by Phillips-Chevron and Mitsubishi. Interestingly upon aluminum alkyl treatment, the first example of a Schrock-type chromium ethylidene complex has been isolated and characterized and found to be a potent catalyst for selective ethylene trimerization. Finally, the other ligands introduced in this thesis are new systems called pyridine-SNS and Si-SNS that introduce some modification to the known commercial SNS catalyst (Sasol technology). The introduction of a pyridine ring or a silyl unit in the ligand scaffold has allowed to understand the mechanism of action of this remarkable system.

No description available.

The complex [IrH(COD)(PMe3)3][Cl]2o2HCl was prepared by the reaction between [Ir(COD)(PMe3)3]Cl and HCl gas in methylene chloride. The product precipitated from the solution and is soluble in polar solvents such as water, acetonitrile, and acetone. [IrH(COD)(PMe3)3][Cl]2o2HCl undergoes reaction in water to form fac-IrCl3(PMe3)3. Also, other [IrH(COD)(PMe3)3][X]2 salts were prepared with X being PF6, OTF, or BF4. It was determined that each salt retained a certain amount of excess acids and [IrH(COD)(PMe3)3][OTF]HOTf was the most stable in the solvent acetonitrile while [IrH(COD)(PMe3)3][PF6]2 showed signs of reaction in acetonitrile after 4 hours. The dicationic salts were also reductively deprotonated by DMSO to form the Ir(I) starting material. Finally a slow equilibrium was noted for [IrH(COD)(PMe3)3][BF4]2 in water by the observation of the reductive deprotonation product. The grignard reaction was employed to synthesize Ir(CH3)3(PMe3)3. IrCl3(PMe3)3 reacts with methyl grignard in THF/Benzene to form fac-Ir(CH3)3(PMe3)3. Only the facial isomer of this reaction was observed and the product was soluble in nonpolar solvents. Acidolysis was utilized to synthesize fac-IrCH3Cl2(PMe3).3 from the reaction between Ir(CH3)3(PMe3)3 and 2 equivalents of HCl. Ir(III) methyl dications have also been synthesized by the reaction of 2 equivalents triflic acids with fac-Ir(CH3)3(PMe3)3. The product of the reaction, mer-IrCH3(OTf)2(PMe3)3 was used to study the insertion of alkynes into the Iridium methyl bond. IrHCl2(PMe3)3 was synthesized by the careful acidolysis of IrH2Cl(PMe3)3 using 1 equivalent of HCl. IrH(OTf)2(PMe3)3 was also synthesized by the metathesis of IrHCl2(PMe3)3 with 2.04 equivalents of silver triflate. The product of that reaction, IrH(OTf)2(PMe3)3, has been used to form dimers and trimers of styrene via catalysis and to isomerize alkene alcohols to aldehydes. IrH(OTf)2(PMe3)3 was also used as a polymerization initiator for vinyl and allyl ethers. / Ph. D.

A novel oligomer was synthesized for the purpose of investigating the effects of ultraviolet, thermal, and microwave polymerization. The synthesis involved an anionic ring-opening equilibration reaction to produce poly(dimethylsiloxane) which was then endcapped with an acid chloride to result in a material which was linear, flexible, had a functionality of four, and a strong dipole moment. Acrylamide terminated poly(dimethylsiloxane) was the end product and was cured with ultraviolet radiation, thermal energy, and microwaves. Characterization of the cured materials demonstrated interesting findings. Microwave cured materials resulted in higher degrees of cure than thermal or ultraviolet cured samples, despite using the best match for the heating rate-sample temperature profiles for each cure process. Several characterization techniques were employed and the procedures and results may be useful for others interested in finding the most efficient cure mode for their material. / Master of Science

<p>Thermal, non-catalytic conversion of light olefins (C2= - C4=) was originally utilized in the production of motor fuels at several U.S. refineries in the 1920-30’s. However, the resulting fuels had relatively low-octane number and required harsh operating conditions (T > 450 oC, P > 50 bar), ultimately leading to its succession by solid acid catalytic processes. Despite the early utilization of the thermal reaction, relatively little is known about the reaction products, kinetics, and initiation pathway under liquid-producing conditions. </p> <p>In this thesis, thermal ethylene conversion was investigated near the industrial operating conditions, i.e, at temperatures between 320 and 500 oC and ethylene pressures from 1.5 to 43.5 bar. Non-oligomer products such as propylene and/or higher odd carbon products were observed at all reaction temperatures, pressures, and reaction extents. Methane and ethane were minor products (< 1 % each), even at ethylene conversions as high as 74 %. The isomer distributions revealed a preference for linear, terminal C4 and C5. The reaction order was found to be 2nd order with a temperature dependent activation energy ranging from 165 to 244 kJ/mol. The importance of diradical species in generating free radicals during a two-phase initiation process was proposed. The reaction chemistry for ethylene, which has only strong, vinyl C-H bonds starkly contrasted propylene, which possesses weaker allylic C-H bonds and showed preference for dimeric C6 products over C2-C8 non-oligomers. </p> <p>Extending this work further, the thermal oligomerization of ethylene was enhanced using high surface area supports such as silica and alumina. Both supports resulted in order of magnitude rate increases compared to the gas phase reaction, however the ethylene conversion rate with alumina was superior to silica by a factor of between 100 and 1,000. Additionally, the alumina evidently confers a catalytic function, resulting in altered product distributions, notably an increase in branched products such as isobutene and isopentenes. The oligomerization chemistry with alumina appears to reflect the involvement of Lewis acid sites rather than traditional Brønsted acid or transition metal catalysis, which operate via carbenium ion and metal-alkyl intermediates, respectively. </p>

Multidrug efflux pumps are membrane proteins that actively transport foreign objects out of cells. The active efflux of these pumps is a critical self-defense mechanism that enables the survival of bacteria under hostile environments. Efflux pump AcrB is a member of the Resistance-Nodulation-Division (RND) super family. In E. coli, it associates with periplasmic protein AcrA and outer membrane channel TolC to extrude a variety of noxious compounds out of cell from both the cytoplasm and the periplasm. My dissertation research focused on two aspects of this multidrug efflux pump: the oligomerization process during the biogenesis of AcrB and its degradation. Oligomerization is an important aspect of the structure and function for many proteins and has been the subject of many studies. However, most of such studies focused on soluble proteins. The oligomerization process of membrane proteins, including AcrB, is rarely explored. In chapter 2, the co-assembly of AcrB variants co-expressed in the same cell was used as a tool to investigate the assembly of AcrB trimers during its bio-production. By monitoring the portion of pure trimers containing only one type of subunit and hybrid trimers containing a mixture of the two kinds of subunits, it was found that the oligomerization of membrane proteins is not a random process as the formation of pure trimer is favored. In chapter 3, the GALLEX system was used to monitor AcrB oligomerization in cells under the native condition. Previously GALLEX has only been used to monitor the oligomerization of small transmembrane proteins. By constructing a series of fusion proteins with different linker length between LexA and AcrB, and optimizing inducer concentration, we finally developed a system that could be used to differentiate AcrB trimers of different oligomerization affinities. While chapters 2 and 3 focus on the trimerization of AcrB, a critical step of its biogenesis, chapters 4 and 5 focus on its life time and degradation. In chapter 4, the life time of AcrB was measured by incorporating non-natural amino acid azidohomoalanine (AHA) into protein translation. Using this method, it was determined that that the half-life of both AcrA and AcrB in E. coli were six days. The surprisingly long lifetime of these detoxification proteins might represent a strategy by the bacteria to conserve energy and maximize their competition niche for survival in a hostile environment. In chapter 5, the degradation process of ssra tagged AcrB was investigated. In-vivo degradation test showed that properly inserted AcrB can be digested after addition of ssra-tag to its C-terminus. It was found that cytoplasmic unfoldase-protease complex ClpXP and chaperone SspB are involved in the degradation. In vitro assay is still being optimized to quantitatively analyze the activity of ClpXP in the degradation of AcrB.