1 |
Systematic Investigation On The Growth Of One-Dimensional Wurtzite NanostructuresMa, Christopher 20 July 2005 (has links)
A systematic investigation into the growth of one-dimensional nanostructures of select II-VI compounds with the wurtzite crystal structure. Two process parameters are systematically altered to observe how each affects deposition. The results of which give a further understanding into the formation of one nanostructure over another, as well as experimental parameters for optimizing the growth of particular CdSe nanomaterials. A statistical analysis is conducted on the experimental data to quantitatively determine the variability and robustness of the experimental setup and process. The information complied from this extensive study will yield a more complete understanding of the experimental setup and how improvements can be made to reduce variability, increase yield, and gain insight into the mechanisms controlling this class of materials.
|
2 |
Integrace nanostruktur do funkčních celků / Integration of nanostructures into functional devicesCitterberg, Daniel January 2019 (has links)
This master thesis is focused on characterization of electrical transport properties of one-dimensional nanostructures. First section of this work deals with theoretical description of the experimental approaches to realization of such measurements. This section involves also a detail discussion of preparation of contacts using e-beam lithography. Next, theoretical description of characterization of nanostructures using photoluminescence measurements is given. Second section describes practical application of the aforementioned electrical transport measurements. Presented results include transport and photoluminescence measurements of WS2 nanotubes, InAs and WO2.72 nanowires. The last section of this thesis deals with nanowire quantum well heterostructures. The section provides both a deeper theoretical view of the problem and results of the photoluminescence measurements are shown.
|
3 |
Dimesionality Aspects Of Nano Micro Integrated Metal Oxide Based Early Stage Leak Detection Room Temperature Hydrogen SensorDeshpande, Sameer Arun 01 January 2007 (has links)
Detection of explosive gas leaks such as hydrogen (H2) becomes key element in the wake of counter-terrorism threats, introduction of hydrogen powered vehicles and use of hydrogen as a fuel for space explorations. In recent years, a significant interest has developed on metal oxide nanostructured sensors for the detection of hydrogen gas. Gas sensors properties such as sensitivity, selectivity and response time can be enhanced by tailoring the size, the shape, the structure and the surface of the nanostructures. Sensor properties (sensitivity, selectivity and response time) are largely modulated by operating temperature of the device. Issues like instability of nanostructures at high temperature, risk of hydrogen explosion and high energy consumption are driving the research towards detection of hydrogen at low temperatures. At low temperatures adsorption of O2- species on the sensor surface instead of O- (since O- species reacts easily with hydrogen) result in need of higher activation energy for hydrogen and adsorbed species interaction. This makes hydrogen detection at room temperature a challenging task. Higher surface area to volume ratio (resulting higher reaction sites), enhanced electronic properties by varying size, shape and doping foreign impurities (by modulating space charge region) makes nanocrystalline materials ideal candidate for room temperature gas sensing applications. In the present work various morphologies of nanostructured tin oxide (SnO2) and indium (In) doped SnO2 and titanium oxide (titania, TiO2) were synthesized using sol-gel, hydrothermal, thermal evaporation techniques and successfully integrated with the micro-electromechanical devices H2 at ppm-level (as low as 100ppm) has been successfully detected at room temperature using the SnO2 nanoparticles, SnO2 (nanowires) and TiO2 (nanotubes) based MEMS sensors. While sensor based on indium doped tin oxide showed the highest sensitivity (S =Ra/Rg= 80000) and minimal response time (10sec.). Highly porous SnO2 nanoparticles thin film (synthesized using template assisted) showed response time of about 25 seconds and sensitivity 4. The one dimensional tin oxide nanostructures (nanowires) based sensor showed a sensitivity of 4 and response time of 20 sec. Effect of aspect ratio of the nanowires on diffusion of hydrogen molecules in the tin oxide nanowires, effect of catalyst adsorption on nanowire surface and corresponding effect on sensor properties has been studied in detail. Nanotubes of TiO2 prepared using hydrothermal synthesis showed a sensitivity 30 with response time as low as 20 seconds where as, TiO2 nanotubes synthesized using anodization showed poor sensitivity. The difference is mainly attributed to the issues related to integration of the anodized nanotubes with the MEMS devices. The effect of MEMS device architecture modulation, such as, finger spacing, number and length of fingers and electrode materials were studied. It has been found that faster sensor response (~ 10 sec) was observed for smaller finger spacing. A diffusion model is proposed for elucidating the effect of inter-electrode distance variation on conductance change of a nano-micro integrated hydrogen sensor for room temperature operation. Both theoretical and experimental results showed a faster response upon exposure to hydrogen when sensor electrode gap was smaller. Also, a linear increase in the sensor sensitivity from 500 to 80000 was observed on increasing the electrode spacing from 2 to 20 μm. The improvement in sensitivity is attributed to the higher reactive sites available for the gaseous species to react on the sensor surface. This phenomenon also correlated to surface adsorbed oxygen vacancies (O-) and the rate of change of surface adsorbed oxygen vacancies. This dissertation studied in detail dimensionality aspects of materials as well as device in detecting hydrogen at room temperature.
|
4 |
Piezoelectric Nanostructures of Zinc Oxide: Synthesis, Characterization and DevicesGao, Puxian 28 November 2005 (has links)
In this thesis, a systematic study has been carried out on the synthesis, characterization and device fabrication of piezoelectric ZnO nanstructures. The achieved results are composed of the following four parts.
Firstly, through a systematic investigation on the Sn-catalyzed ZnO nanostructure, an improved understanding of the chemical and physical process occurring during the growth of hierarchical nanostructures has been achieved. Decomposed Sn from SnO2 has been successfully demonstrated and proved to be an effective catalyst guiding the growth of not only aligned ZnO nanowires, but also the hierarchical nanowire-nanoribbon junction arrays and nanopropeller arrays. During the vapor-liquid-solid (VLS) catalyzing growth process at high temperature, Sn in the liquid state has been proved to be able to guide the growth of nanowires and nanoribbons in terms of growth directions, side facets, and crystallographic interfaces between Sn and ZnO nanostructures.
Secondly, using pure ZnO as the only source material, by precisely tuning and controlling the growth kinetics, a variety of hierarchical polar surface dominated nanostructures have been achieved, such as single crystal nanorings, nanobows, nanosprings and superlattice nanohelices. High yield synthesis of ZnO nanosprings over 50% has been successfully obtained by mainly controlling the pre-pumping level associated with the partial pressure of residual oxygen during the vapor-solid growth process. The rigid superlattice nanohelices of ZnO have been discovered, which is a result of minimization of the electrostatic energy induced by polar surfaces. The formation process of the nanohelix has been systematically characterized.
Thirdly, two new strategies have been successfully developed for fabricating ZnO quantum dots and synthesis of ZnO nanodiskettes and nanotubes. The formation process is based on a common concept of self-assembly.
Finally, a series of devices and applications studies based on several piezoelectric ZnO nanostructures, such as nanobelts, nanopropellers and nanohelices, have been carried out utilizing the electro-mechanical resonance, bio-surface functionalization, devices fabrication and electrical characterization. Individual nanobelt and nanohelix based nanodevices have been successfully fabricated for applications in chemical and biological sensing. The study opens a few new areas in oxide nanostructures and applications.
|
Page generated in 0.1422 seconds