A compact optical terahertz (THz) source was demonstrated based on an efficient high-repetition-rate doubly resonant optical parametric oscillator (OPO) around 2 mu m with two type-II phase-matched KTP crystals in the walk-off compensated configuration. The KTP OPO was intracavity pumped by an acousto-optical (AO) Q-switched Nd:YVO4 laser and emitted two tunable wavelengths near degeneracy. The tuning range extended continuously from 2.068 mu m to 2.191 mu m with a maximum output power of 3.29 W at 24 kHz, corresponding to an optical-optical conversion efficiency (from 808 nm to 2 mu m) of 20.69%. The stable pulsed dual-wavelength operation provided an ideal pump source for generating terahertz wave of micro-watt level by the difference frequency generation (DFG) method. A 7.84-mm-long periodically inverted quasi-phase-matched (QPM) GaAs crystal with 6 periods was used to generate a terahertz wave, the maximum voltage of 180 mV at 1.244 THz was acquired by a 4.2-K Si bolometer, corresponding to average output power of 0.6 mu W and DFG conversion efficiency of 4.32x10(-7). The acceptance bandwidth was found to be larger than 0.35 THz (FWHM). As to the 15-mm-long GaSe crystal used in the type-II collinear DFG, a tunable THz source ranging from 0.503 THz to 3.63 THz with the maximum output voltage of 268 mV at 1.65 THz had been achieved, and the corresponding average output power and DFG conversion efficiency were 0.9 mu W and 5.86x10(-7) respectively. This provides a potential practical palm-top tunable THz sources for portable applications.

In this study we demonstrate the use of third harmonic (TH) and second harmonic (SH) generation in imaging dental sections. Teeth are the hardest and most indestructible part in human body. The TH and SH greatly facilitate observation of porous structures and collagen within the dental sections, respectively. Strong SH has been found on various biological specimens, such as collagen, potato starch, and skeletal muscles. These materials all possess periodical nano-structures that are often referred as (nonlinear) bio-photonic structures. In particular, collagen is an extra-cellular structural protein and is a major component of bone, cartilage, skin, and other tissues. Collagen fibrils have a triple-helical structure and it is believed that this structure enables collagen to generate SH signal from a wide range of wavelengths in the infrared region. For comparison, microtubule structures within dentin, due to its large index mismatch with surrounding, can be clearly seen with THG imaging. The THG also facilitate observation of prismatic structures in enamel. The successful construction of a multi-photon laser scanning microscope that can operate in both reflection and transmission modes is the key for this study. A femtosecond, sync-pumped optical parametric oscillator (OPO) is used to generate second and third harmonics from dental sections. Dental sections have large index of refraction¡]n~1.68¡^and scatter visible light severely. The employment of excitation wavelength at 1260 nm greatly reduces scattering and absorption within the sample. Its corresponding SH and TH wavelengths are at 630 nm and 420 nm, respectively. Additionally, 3-D structural views are also reconstructed from the optically sectioned images by the use of specialized 3D image processing software.