The synthesis of 2-aza-norborane derivatives is presented. The use of these compounds in preparation of Ir catalysts for asymmetric hydrogenations is described. The evaluation and optimization of the catalysts as well as the mechanistic aspects of the catalytic process are discussed. The use of non-activated iminodieniphiles in stereoselective aza-Diels-Alder reaction has expanded the scope of the reaction and provided a convenient root for preparation of 2-aza-norboranes, analogues of which were developed into novel bicyclic 2-aza-norbornyl-oxazoline ligands for Ir-catalyzed asymmetric transfer hydrogenations. Using ths Ir complexes acetophenone was hydrogenated in 79% ee. 2-Aza-norbornyl-oxazolines were also developed into novel N,P-ligands. Resulting phosphine-oxazolines were evaluated in Ir-catalyzed asymmetric hydrogenation of structurally diverse imines and olefins. Optimization of ligands was performed through: 1) Alteration of the stereoconfiguration at the 5’-position as well as variation of the size and geometry of the substituents at this position; 2) Screening through various phosphine substituents of the ligand. Both directions of optimization reflect on the influence of the ligands’ sterik bulk on stereoselectivity of catalytic process. High performance catalysts were developed for both transformations allowing asymmetric hydrogenation of imines with 92% ee and asymmetric hydrogenation of olefins with 99% ee. Possible mechanisms for these transformations were suggested based on computational studies. Selectivity model for rationalization of results of Ir-catalyzed olefin hydrogenation also was designed.

In medicinal chemistry, there is a constant need for new preparative methods, both to make the synthesis process more effective, and to increase the accessibility to a wide variety of compounds. A number of different approaches can be used to attain these goals. Transition metal catalysis is generally performed under mild conditions, providing both regio- and chemoselective reactions. Thus, it offers an attractive means of preparation of complex drug candidates. Two additional methodologies used to increase the preparative efficiency are one-pot protocols and controlled microwave heating. One-pot and multi-component reactions are less time consuming than step-by-step reactions, and microwave heating has been used to considerably shorten the reaction times. This thesis describes a new palladium-catalyzed, one-pot reaction producing racemic acetal-protected 3-hydroxy-1-indanones from ethylene glycol vinyl ether and triflates of salicylic aldehydes. The triflates were prepared using controlled microwave heating. The reaction sequence starts with a regioselective internal Heck coupling, followed by an annulation cascade. By including secondary amines in the reaction mixture, the reaction was further developed into a three-component reaction delivering racemic acetal-protected 3-amino-1-indanones. This new method was utilized for the synthesis of primary, secondary and tertiary aminoindanones. Finally, by using enantiopure t-butyl sulfinyl imines, derived from salicylic aldehyde triflates and ethylene glycol vinyl ether as starting materials in a closely related type of palladium coupling–annulation sequence, a stereoselective protocol providing enantiomerically pure 3-amino-1-indanones was developed. To demonstrate an application in medicinal chemistry, the enantiopure 3-amino-1-indanones were incorporated as P2 and/or P2´ substituents into active HIV-1 protease inhibitors.

One-step photoinitiated free radical carbonylation was employed for the rapid (5–7 min) labelling of aliphatic carboxylic acids, esters, and amides with a short-lived positron emitter 11C (t½ = 20.3 min) at the carbonyl position. The labelled compounds were synthesized from alkyl iodides (0.05–0.1 mmol), [11C]carbon monoxide, and appropriate nucleophiles. Decay-corrected radiochemical yields were up to 74%; conversion of [11C]carbon monoxide reached 85–90%; specific radioactivity was 158–192 GBq/mmol. The labelled compounds were identified and characterized using HPLC, LC-MS, and 1H and 13C NMR. The effects of solvents, additives, photoirradiation, temperature, and reaction time were studied and discussed. [carbonyl-11C]Amides were synthesized using amines in 1–2 equiv. to iodides, exploiting solvent effects to control reactivity. [carboxyl-11C]Acids were synthesized using water as a nucleophile, in binary and ternary aqueous solvent mixtures; the addition of TBAOH or KOH was necessary to obtain high radiochemical yields. [carbonyl-11C]Esters were synthesized using primary and secondary alcohols, tert-butanol, and phenol. Bases were KOH, BuLi, LiHDMS. The effects of photosensitizers were studied and exploited to accelerate the labelling of carboxylic acids and esters resulting in 75–85% decay-corrected radiochemical yields under mild conditions without the use of bases. A mild procedure for the 11C-carboxylation of alkyl iodides using DMSO as an oxygen nucleophile was developed. This method is expected to be suitable in the macroscale synthesis of carboxylic acids using isotopically unmodified carbon monoxide. Radical carbonylation was applied to improve the synthesis of an extensively used PET tracer, [carbonyl-11C]WAY-100635. The tracer was synthesized in one step, whereas a common approach via Grignard reagents requires three steps. In addition, several (13C)compounds were synthesised using the described methods. Free radical carbonylation may be used for the 11C-carbonylation of alkyl iodides, whereas transition-metal carbonylation – of aryl halides and triflates. Thus, the two carbonylation methods are complementary with respect to the scope of synthetic targets.

In the last decades NMR spectroscopy has become an invaluable tool both in academic research and in the pharmaceutical industry. This thesis describes applications of NMR spectroscopy in biomedicinal research for structure elucidation of biologically active peptides and peptidomimetics as well as in studies of ligand-protein interactions. The first part of this thesis describes the theory and methodology of structure calculations of peptides using experimental restraints derived from NMR spectroscopy. This methodology has been applied to novel mimetics of the peptide hormones desmopressin and Leu-enkephalin. The results of these studies highlight the complicating issue of conformational exchange often encountered in structural determination of peptides and how careful analysis of experimental data as well as optimization of experimental conditions can enable structure determinations in such instances. Although the mimetics of both desmopressin and Leu-enkephalin were found to adopt the wanted conformations, they exhibited no or very poor biological activity. These results demonstrate the difficulties in designing peptidomimetics without detailed structural information of the receptors. A stereoselective synthetic route towards XxxΨ[CH2O]Ala pseudodipeptides is also presented. Such pseudodipeptides can be used as isosteric amide bond replacements in peptides in order to increase their resistance towards proteolytic degradation. The second part of this thesis describes the study of the interaction between compounds that inhibit pilius assembly, pilicides, and periplasmic chaperones from uropathogenic Escherichia coli. Periplasmic chaperones are key components in assembly of pili, i.e. hair-like protein complexes located on the surface of Escherichia coli that cause urinary tract infections. Detailed knowledge about this interaction is important in understanding how pilicides can inhibit pilus assembly by binding to chaperones. Relaxation-edited NMR experiments were used to confirm the affinity of the pilicides for the chaperones and chemical shift mapping was used to study the pilicide-chaperone interaction surface. These studies show that at least two interaction sites are present on the chaperone surface and consequently that two different mechanisms resulting in inhibition of pilus assembly may exist.

This thesis describes the design, synthesis and evaluation of novel chalcogenide antioxidants. A computational model for the prediction of antioxidant properties of chalcogen-containing antioxidants has been developed. The model has been used to probe the relationship between geometry, chalcogen substitution and activity for a series of α-tocopherol analogues of varying ring size and chalcogen substitution. A series of simple diaryltellurides and aryl-alkyl tellurides have been synthesised. The selenium analogue of α-tocopherol has been synthesised in eleven steps and 6.5% total yield, with formation of the selenacycle by homolytic substitution at selenium as the key step. Tentative steps have been taken towards the construction of the tellurotocopherol structure by microwave-assisted radical cyclisation methodologies. A combination of EPR and kinetic studies has been used to assess the antioxidant characteristics of selenotocopherol. A two-phase lipid peroxidation model revealed that the selenotocopherol is not catalytically regenerable. The same model has been used to assess the cooperativity of mixtures of tellurides with α-tocopherol and an aqueous thiol. It was seen that combinations of α-tocopherol with tellurides incorporating phenols displayed synergistic properties, and the mechanistic implications of this are discussed. DSC measurements have been used to assess the antioxidant activity of tellurides together with coantioxidants in melts of polypropylene. The tellurides display excellent activity together with thiol or a sterically hindered phenol antioxidant. In chemiluminescence studies performed at lower temperatures, the telluride mixtures still outperform commercial blends, but to a lesser extent. In a synthetic oil a telluride has demonstrated promising antioxidant properties together with a thiol or phenolic antioxidant. However, under more realistic test conditions the telluride acts instead as a prooxidant. Some tellurides have been evaluated as antioxidants in paper. Water-soluble tellurides appear to function better than lipophilic tellurides, but neither is comparable in activity to α-tocopherol.

<p>This thesis is divided into three separate parts with amino alcohols as the common feature. The first part describes the development of a novel three-component approach to the synthesis of α-hydroxy-β-amino esters. Utilizing a highly diastereoselective Rh(II)-catalyzed 1,3-dipolar cycloaddition of carbonyl ylides to various aldimines, syn-α-hydroxy-β-amino esters formed in high yields and excellent diastereoselectivities. This methodology was also applied in a short enantioselective synthesis of the C-13 side-chain of Taxol.</p><p>The second part of the thesis describes a total synthesis of D-erythro- Sphingosine based on a cross-metathesis approach to assemble the polar head group and the aliphatic chain.</p><p>The last part deals with the application of amino alcohols as scaffolds in a diversity-oriented protocol for the development of libraries of small polycyclic molecules. The design of the libraries is based on the iterative use of two powerful ring-forming reactions; a ring-closing metathesis and an intramolecular Diels-Alder reaction, to simultaneously introduce structural complexity and diversity.</p>

This thesis describes the application of multivariate methods in a novel approach to the formulation of tablets for direct compression. It begins with a brief historical review, followed by a basic introduction to key aspects of tablet formulation and multivariate data analysis. The bulk of the thesis is concerned with the novel approach, in which excipients were characterised in terms of multiple physical or (in most cases) spectral variables. By applying Principal Component Analysis (PCA) the descriptive variables are summarized into a few latent variables, usually termed scores or principal properties (PP’s). In this way the number of descriptive variables is dramatically reduced and the excipients are described by orthogonal continuous variables. This means that the PP’s can be used as ordinary variables in a statistical experimental design. The combination of latent variables and experimental design is termed multivariate design or experimental design in PP’s. Using multivariate design many excipients can be included in screening experiments with relatively few experiments. The outcome of experiments designed to evaluate the effects of differences in excipient composition of formulations for direct compression is, of course, tablets with various properties. Once these properties, e.g. disintegration time and tensile strength, have been determined with standardised tests, quantitative relationships between descriptive variables and tablet properties can be established using Partial Least Squares Projections to Latent Structures (PLS) analysis. The obtained models can then be used for different purposes, depending on the objective of the research, such as evaluating the influence of the constituents of the formulation or optimisation of a certain tablet property. Several examples of applications of the described methods are presented. Except in the first study, in which the feasibility of this approach was first tested, the disintegration time of the tablets has been studied more carefully than other responses. Additional experiments have been performed in order to obtain a specific disintegration time. Studies of mixtures of excipients with the same primary function have also been performed to obtain certain PP’s. Such mixture experiments also provide a straightforward approach to additional experiments where an interesting area of the PP space can be studied in more detail. The robustness of a formulation with respect to normal batch-to-batch variability has also been studied. The presented approach to tablet formulation offers several interesting alternatives, for both planning and evaluating experiments.

This thesis is divided into three separate parts with amino alcohols as the common feature. The first part describes the development of a novel three-component approach to the synthesis of α-hydroxy-β-amino esters. Utilizing a highly diastereoselective Rh(II)-catalyzed 1,3-dipolar cycloaddition of carbonyl ylides to various aldimines, syn-α-hydroxy-β-amino esters formed in high yields and excellent diastereoselectivities. This methodology was also applied in a short enantioselective synthesis of the C-13 side-chain of Taxol. The second part of the thesis describes a total synthesis of D-erythro- Sphingosine based on a cross-metathesis approach to assemble the polar head group and the aliphatic chain. The last part deals with the application of amino alcohols as scaffolds in a diversity-oriented protocol for the development of libraries of small polycyclic molecules. The design of the libraries is based on the iterative use of two powerful ring-forming reactions; a ring-closing metathesis and an intramolecular Diels-Alder reaction, to simultaneously introduce structural complexity and diversity. / QC 20101222

<p>This thesis deals with the impact of hydrogen bonding on the properties of phenols. The possibility for tyrosine to form hydrogen bonds to other amino acids has been found to be important for its function as an electron transfer mediator in a number of important redox enzymes. This study has focused on modeling the function of tyrosine in Photosystem II, a crucial enzyme in the photosynthetic pathway of green plants.</p><p>Hydrogen bonds between phenol and amines in both inter- and intramolecular systems have been studied with quantum chemical calculations and also in some solid-state structures involving phenol and imidazole.</p><p>Different phenols linked to amines have been synthesized and their possibilities of forming intra- and intermolecular hydrogen bonds have been studied as well as the thermodynamics and kinetics of the generation of phenoxyl radicals via oxidation reactions.</p><p>Since carboxylates may in principle act as hydrogen bond acceptors in a manner similar to imidazole, proton coupled electron transfer has also been studied for a few phenols intramolecularly hydrogen bonded to carboxylates with the aim to elucidate the mechanism for oxidation. Electron transfer in a new linked phenol—ruthenium(II)trisbipyridine complex was studied as well.</p><p>The knowledge is important for the ultimate goal of the project, which is to transform solar energy into a fuel by an artificial mimic of the natural photosynthetic apparatus</p>

<p>This thesis deals with the copper-catalyzed substitution of allylic substrates.</p><p>In the first part of this thesis, the synthesis of a series of metallocenethiolates is described. The thiolates were examined as ligands in the enantioselective copper(I)-catalyzed γ-substitution of allylic acetates.</p><p>The second part describes a study on copper-catalyzed α-substitution of enantiomerically pure secondary allylic esters. It was observed that the degree of chirality transfer is strongly dependent on the reaction temperature. The loss of chiral information is consistent with an equilibration of the allylCu(III) intermediates prior to product formation, which is essential in order to realize a copper-catalyzed dynamic kinetic asymmetric transformation process.</p><p>The third part describes a study on copper-catalyzed stereoselective α-substitution of enantiopure acyclic allylic esters. This method, when combined, with ruthenium and enzyme catalyzed dynamic kinetic resolution of allylic alcohols, provides a straightforward route to pharmaceutically important α-methyl carboxylic acids.</p><p>The fourth part is a mechanistic study on the reaction of perfluoroallyl iodide with organocuprates. Experimental studies as well as theoretical calculations were used to explain the contrasting reactivity of perfluoroallyl iodide vs. allyl iodide in cuprate allylation reactions.</p><p>In the fifth part, the development of a practical and useful method for the preparation of pentasubstituted acylferrocenes is presented.</p>