The thesis deals with the variant design of the steel structure of single-track railway bridge on the line Tišnov – Nové Město na Moravě. The task is bridging the local road by a bridge structure with one field. Length of the bridge is 40 m.

This Master Thesis compares three various concrete materials for stiffening orthotropic bridge deck plate and investigates stress reducing factors in selected weld joints. The thesis investigates the standard load situation and also overloaded situation. A parameter study with different material inputs has been done to see how it affects stress in weld joints.

This thesis deals with design of III/0462 road overpass over D46 highway near Brodek u Prostějova. There are 2 preliminary variants. First variant is a right bridge, whose main beams are tied archs. Second variant is a skew bridge with truss superstructure. In case of second variant there are three subvariants differing with truss design. Design and calculation is done according to valid standarts and other regulations for designing bridges.

The subject of this diploma’s thesis is design of the footbridge over Radlická street in Prague. Total length of the footbridge is about 90 m. Three variant designs were made with different systems of static construction. Based on the multi-criteria analysis, the most suitable variant was chosen. The variant A, a continuous truss beam, was chosen for detailed design. It is a truss footbridge with a lower orthotropic deck without a wind bracing. The stability of the upper chord is secured by frame stiffness of verticals and stiffness of the floor beam. Detailed static calculation includes assessment of load-bearing parts of the structure and assessment of welds. The structure is made of steel class S335. Assessment and dimensioning were designed according to valid standards ČSN EN 1990-1993.

The thesis deals with design and static assessment of the steel railway bridge with a span 36,6 m. The bridge is located on the two-track corridor line Košice - Púchov. It consists of two bridge structures connected by a longitudinal expansion joint. The main construction consists of four solid welded beams mounted on steel calotte bearings. The bridge deck is the top with a tub for the track bed, which is continuous at the site of the bridge. Bridging the bridge is secured by a track bed and a horizontal and lateral truss bracing. On both sides of the bridge are pedestrian walkways with a width of 1,5 m.

The aim of this bachelor thesis is variant design and assessment of loadbearing structure of steel footbridge over I/11 route. Main superstructure will have two steel arched beams joined with lower orthotropic deck using suspenders in the „V“ shape. For assessment of superstructure a three-dimensional structural computational model was created in software Dlubal RFEM 5.20. The span of the footbridge is 48,71 m, free width is 4 m, height is 7,5 m. The structure was designed according to currently valid standarts to the ultimate limit state and serviceability limit state. Supporting elements are designed from steel of class S355.

The subject of this diploma thesis is static verification steel structure of exist railway bridge in accordance with the valid standards. The bridge have three simple spans with a span of 25; 98 and 25 meters, outer fields are simple beams, the middle field is the beam reinforced with an arch with vertical rods. Steel orthotropic deck with longitudinal stiffeners and crossbeams. Further were designed and analyse other possible options super structure of the middle field, and the resulting variant as a circle span with radial rods was detail solved and made documentation.

The objective of this diploma thesis is the stress-strain analysis of the crack terminating at the orthotropic bi-material interface suggested as the plane problem of the linear fracture mechanics. The first part is engaged in basic relations of the linear fracture mechanics. The second part is focused on the singularity exponent evaluation for the crack impinging and generally inclined with respect to the bi-material interface. It follows the determination of the generalized stress intensity factors applying the analytical-numerical approach represented by the finite element analysis. The last part of this work is focused on the testing of algorithms applied to the specific crack and bi-material interface configurations. A conclusion discusses the influence of the bi-material mechanical properties and the angel of the crack inclination to the obtained numerical results.

The presented diploma thesis deals with a problem of a generalized stress intensity factor determination and a consecutive study of stress distribution around the bimaterial notch tip, combining analytical and numerical methods. This task is possible to sectionalize into three parts. The first part is dedicated to the fundamentals of the linear fracture mechanics and the mechanics of composite materials. The second part deals with methods of anisotropic plane elasticity solution. Pursuant to the solution the computational models in the third part are created. The first model makes for determination of a singularity exponent eigenvalue by dint of Lekhnitskii-Eshelby-Stroh formalism. The second model makes for determination of the generalized stress intensity factor using psi-integral method, which is based on the Betti reciprocal theorem. All needed calculation are performed in the software ANSYS 12, Maple 12 and Silverforst FTN95. Results will be compared with the values obtained from a direct method of the generalised stress intensity factor determination.

V současnosti jedna z metod spojování zejména tlustých a vysoce zatížených kompozitních komponent je šroubový spoj, který je možné rozebrat pro případ opravy na rozdíl od lepeného spoje. Kompozitní konstrukce se tradičně dimenzují tak, aby během provozu nedošlo k porušení první vrstvy laminátu, nicméně důležité je taky poznat chování laminátu po porušení první vrstvy. Pro strukturální analýzu nejenom spojů, ale také dalších komponent se používá metoda konečných prvků a protože moderní nelineání řešiče jsou schopné modelovat chování laminátu po porušení první vrstvy, tato schopnost jednoho z nich byla využita v této práci při zkoumaní chování sklolaminátu spojeného s hliníkovou částí šrouby. Konečno-prvkové modely dvou spojů kovové a kompozitní části konstrukce schopné popsat progresivní porušování laminátu byly postaveny s využitím tří různých poruchových kritérií – kritéria maximálního napětí, kritéria Hill a kritéria Tsai-Wu. Problém byl řešen s využitím řešiče Nastran. Křivky síla-posuv, tuhost-posuv a hodnoty zatížení při hraničním posuvu byly porov-nány s výsledky experimentů. Jelikož faktor zbytkové tuhosti ovlivňuje výsledky ana-lýzy progresivního porušování, byly provedeny citlivostní studie zkoumajíci vliv faktoru na přesnost a stabilitu výpočtu. Shoda výpočtu s experimentem v případe prvního šroubového spoje je méně uspokojivá, nicméně shoda v případě druhého spoje, který má zesilující tenkou ocelovou destičku na spodní straně, je podstatně lepší. Vý-borná shoda je zejména při použití interaktivních kritérií Hill a Tsai-Wu.