Spelling suggestions: "subject:"out off plant"" "subject:"out off plans""
1 |
Structural Analysis and Testing of a Carbon-Composite Wing using Fiber Bragg GratingsNicolas, Matthew James 11 May 2013 (has links)
The objective of this study was to determine the deflected wing shape and the out-of-plane loads of a large-scale carbon-composite wing of an ultralight aerial vehicle using Fiber Bragg Grating (FBG) technology. The composite wing was instrumented with an optical fiber on its top and bottom surfaces positioned over the main spar, resulting in approximately 780 strain sensors bonded to the wings. The strain data from the FBGs was compared to that obtained from four conventional strain gages, and was used to obtain the out-of-plane loads as well as the wing shape at various load levels using NASA-developed real-time load and displacement algorithms. The composite wing measured 5.5 meters and was fabricated from laminated carbon uniaxial and biaxial prepreg fabric with varying laminate ply patterns and wall thickness dimensions. A three-tier whiffletree system was used to load the wing in a manner consistent with an inlight loading condition.
|
2 |
The Study on the Measurement of Out-of-Plane Displacement of an Object Subjected to Both Temperature and Displacement Field by Using the Holographic InterferometryTsai, Ming-Lang 17 May 2001 (has links)
The main aim of this study is to extending the holographic interferometry technique to measure the out-of-plane displacement of an object subjected to both temperature and displacement field. It is noted that both the out-of-plane displacement and the ambient temperature change can cause image fringes. Therefore, an auxiliary object is used to identify the fringe numbers caused by the ambient temperature change during the experiment. The warpage measurement of a PBGA package is used as an example. It can be shown that the proposed method works
|
3 |
Seismic Performance of Unreinforced Masonry Walls Retrofitted with Post-tensioning TendonsLazzarini, Daniel Louis 01 June 2009 (has links) (PDF)
Unreinforced masonry (URM) structures have historically been regarded as structurally unsound in response to seismic events. The tendency for URM walls to collapse out-of-plane in a brittle manner is continually cause for concern. Retrofit of these walls is necessary in order to prevent severe damage and injury to occupants.
This paper is concerned with the retrofit of unreinforced masonry (URM) walls in response to out-of-plane loading. A retrofit design was developed and verified through structural testing. The selected retrofit technique incorporates vertical coring of URM walls to allow for the insertion of a single post-tensioning (PT) tendon. Tendons are spaced at a regular interval and anchored at the top of the wall parapet and at the lower diaphragm level. Tensioning of the tendons imparts a compressive stress to the wall that effectively increases the wall cracking moment strength, ultimate moment strength and displacement capacity. Additionally, the insertion of PT tendons allows the wall to behave in a ductile manner in response to out-of-plane ground motion.
Extensive research was conducted in order to accurately portray the material properties and construction methods of unreinforced masonry walls in San Luis Obispo, California. Various mortar mix designs were generated and tested so that a mix design could be selected to best reflect the target URM structures. Seismic parameters were generated to reflect a URM structure in San Luis Obispo.
An unreinforced masonry wall was constructed by a professional mason using the established mortar mix proportions and salvaged bricks from the 1920 era. Having a pin-pin unsupported height of 11 feet, the wall constructed for testing was reflective of the configuration of URM walls in many downtown San Luis Obispo structures. The wall was loaded in the out-of-plane direction by 4 equal point loads mimicking a uniformly distributed load. The testing program consisted of cycling the wall through target internal moments and target displacements.
It was verified through testing that post-tensioning tendons can be successfully introduced in URM walls to resist out-of-plane bending. Testing showed that the addition of PT tendons significantly increased the wall’s cracking moment capacity, giving it the elastic strength to resist twice the forces imposed by the design-level ground motion. PT tendons also increased the nominal strength of the wall, allowing the wall to achieve large displacements without collapse. It was also found that PT tendons provided a restoring force to the wall returning it to almost no residual displacement after each displacement cycle. Thus, the URM wall retrofitted with PT tendons demonstrated significant integrity as a structural system, providing for improved strength and ductility with no residual displacement.
|
4 |
Vergleichende Studie zum Verlauf röntgendichter Nervus femoralis-Katheter, die mit der In-plane- und der Out-of-plane-Technik angelegt wurden / Comparative study for ultrasound guided placement of femoral nerve katheters in out-of-plane versus in-plane technique, in patients with femoral neck fraktureDracklé, Joschka 15 August 2019 (has links)
No description available.
|
5 |
DESIGN AND BEHAVIOR OF STEEL-PLATE COMPOSITE (SC) WALL TO REINFORCED CONCRETE (RC) WALL MECHANICAL CONNECTIONHassan Sagheer Anwar (14160276) 29 November 2022 (has links)
<p>In safety-related nuclear structures, steel-plate composite (SC) walls are often used in combination with reinforced concrete (RC) walls or foundations. The design demands need to be transferred between the two different structural systems through appropriate connections without connection failure, which is often associated with brittle failure mode. This study presents a design procedure developed for mechanical connections between SC and RC walls. This procedure implements the full-strength connection design approach as per Specifications for Safety-Related Steel Structures for Nuclear Facilities, AISC N690-18, which requires connections to be stronger than the weaker of the connected walls. The study also presents the results from experimental and numerical investigations conducted to verify the structural performance of the full-strength SC wall-to-RC wall mechanical connection.</p>
<p>The experimental program involved testing six mechanical connections comprising four full-scale and two scaled specimens. The four specimens subjected to out-of-plane moment (OOPM) and out-of-plane shear (OOPV) represented a unit cell of a typical wall in a nuclear facility. The remaining two specimens subjected to in-plane shear (IPV) were scaled (1:3) to facilitate testing using the existing loading setup. Two specimens were tested for each loading scenario. The two specimens per loading case were differentiated by longitudinal rebar-to-baseplate connection plans: coupler (C) and double nut (DN). The performance, strength, ductility, and failure mode of the proposed mechanical connection were evaluated based on the experimental observations.</p>
<p>The observed governing failure mode of all test specimens was either RC wall flexural yielding or RC wall shear failure. The connection region steel plates (tie plates, wing plates, and baseplates) remained within their elastic range until failure ensuring energy dissipation away from the connection region. Additionally, the wing plates and baseplates strains remained comparatively lower than the tie plate strain values. This was attributed to the contribution of concrete during the force transfer between the two structural elements indicating that the proposed connection design procedure is suitable and conservative for SC wall-to-RC wall mechanical connections.</p>
<p>Three-dimensional (3D) finite element models (FEM) were developed and benchmarked against the experimental data to gain an additional insight into the connection behavior. Parametric studies were conducted to compensate for the limited experimental database and evaluate the influence of design parameters such as wall thickness and RC wall longitudinal reinforcement layers on the performance of the designed mechanical connection. Numerically predicted results compared favorably with experimental observations. The recommended design procedure is intended to help designers consider mechanically connecting SC-RC walls where non-contact lap splicing is not feasible and in an attempt to utilize the potential for accelerated construction time and enhanced structural performance of SC walls.</p>
<p><br></p>
|
6 |
Knittin of carbon and Dyneema® fibres to fit for contour sahpes in compositesPanduranga Shahu, Sharath January 2016 (has links)
Textile process and textile structures that are suitable for composites are carefully studied and chosen to have weft knitted fabrics. The aim of this research is to knit the carbon and Dyneema® fibres in circular weft knitting to fit contour shapes. Carbon/Dyneema® can also be knitted in warp knitting machines to get properties in multi axial direction. But the fabric was flat and can be used only for 2D shape products which are having less drapabiity. According to previous research, weft knitting is the best suitable for complex preforms. Before knitting these fibres properties were studied in order to avoid the damage to the carbon fibres. The carbon fibres have high bending rigidity, low resistance to friction and are very brittle. A small damage to the carbon fibre in knitting subsequently affect directly on the composite properties. The strongest manmade fibre manufactured till date is Dyneema® and these fibres could be used in composites due to its performance, properties and light weight. But, the Dyneema® fibres are expensive when compared to common polyester, so polyester fibres are used to compare the properties and cost performance ratio. The critical bending of the carbon fibres causes friction between the fibres and also between fibre and machine. This was considered carefully during the knitting of carbon fibres and the idea chosen is mentioned in this thesis. Between the two layers of Dyneema®/polyester, carbon fibres are laid circularly in unidirectional and in un-crimped condition. This makes the carbon yarn to possess good mechanical properties. The 2 layers of Dyneema®/polyester fibres exchange the loops at certain points to increase the inter-laminar strength and decrease the carbon fibre distortion. This structure helps to withstand external load. It is also lighter than the carbon composite with additional properties. This makes much more space in the future for the Dyneema® fibres in the 3D carbon composite manufacturing. The internal carbon fibres are fully covered by the Dyneema® fibres to withstand the external impact load and not to damage the carbon fibres. So the loop length, stitch density, fibre volume fractions are considered before knitting.
|
7 |
Investigation of Out-of-Plane Properties of Interlocking Compressed Earth Block WallsHerskedal, Nicholas Anthony 01 December 2012 (has links)
Interlocking compressed earth blocks (ICEBs) are cement stabilized soil blocks that allow for dry stacked construction. The incomplete understanding of the inelastic performance of ICEB building systems limits widespread acceptance of this structural system in earthquake prone areas. This thesis presents results from an experimental program designed to explore the behavior of ICEB walls, built according to current design practice in Indonesia and Thailand, and subjected to out-of-plane loading. A total of five reinforced and grouted ICEB walls were constructed and tested.
Results from experimentation show the current masonry design code, ACI 530, adequately predicts the yield strength of these walls. However, ACI 530 grossly over-predicts the ICEB wall stiffness. All tests showed flexural behavior and failure, except for one wall. A brittle failure was observed in one wall before reaching the predicted flexural strength, prompting a suggested maximum shear tie spacing. The testing results provide useful data for developing analytical models that predicts the seismic behavior of ICEB walls under out-of-plane loading.
A moment-curvature relationship was developed that accurately predicts the behavior of these walls in the elastic range as well as the inelastic range. By comparing the data provided by two walls of similar sizes, one including a pilaster and one without a pilaster, insight into stiffener elements was gained. Analysis of these two walls provides a limit on the length and height of ICEB walls without stiffener elements to prevent significant structural damage during a seismic event. In all, conclusions based on experimental data from ICEB out-of-plane loading tests are aimed to provide suggestions for ICEB construction in areas of high-seismicity.
|
8 |
面外繰り返し水平力を受ける逆L形鋼製箱形断面橋脚の耐震性能に関する解析的研究葛, 漢彬, GE, Hanbin, 渡辺, 俊輔, WATANABE, Syunsuke, 宇佐美, 勉, USAMI, Tsutomu, 青木, 徹彦, AOKI, Tetsuhiko 07 1900 (has links)
No description available.
|
9 |
Experimental Modeling and Laboratory Measurements of Drag Embedment Anchors Subjected to In-Plane and Out-Of-Plane LoadingDrake, Aaron C. 2011 August 1900 (has links)
Extreme hurricane events of the past decade are responsible for several drag embedment anchor (DEA) mooring failures of mobile offshore drilling platforms stationed within the Gulf of Mexico. A proposed failure mechanism is caused by out-of-plane loading. The current status of DEA holding capacity is based on empirical design charts and does not include the effects of out-of-plane loading. Experimental modeling using a 1:10 scale generic DEA was performed at the Haynes Coastal Engineering Laboratory at Texas A & M University to examine the effects of out-of-plane load conditions. Instrumentation and specialized devices were constructed to measure the anchor's trajectory through a representative sample of Gulf of Mexico clay with average un-drained shear strength of 0.764 kPa (16 psf). The sediment basin allowed for drag distances of 4.87 m (16 ft) and an embedment depth of 1.37 m (4.5 ft).
The measurements included pitch and roll of the anchor and line tension measured at the shank pad-eye. The variables modeled were fluke angle settings of 22°, 36° and 50°. The initial towline angle was varied from a minimum of 5° to upwards of 20°. Surface out-of-plane angles of 45° and 90° and embedment loading of 15°, 30° and 45° were examined. Curves of the ultimate holding capacity with respect to the out-of-plane towline angle and ultimate embedment depth were developed as functions of out-of-plane loading angles. Analysis of the rate effect indicates that a 46 percent increase in towing velocity causes an average 3 percent increase of holding capacity. The 50° fluke angle embeds an average of 0.7 fluke lengths deeper and has a holding capacity of 0.73 units greater than the 36° setting. The surface out-of-plane tests have a 5.1 percent reduction in holding capacity as the out-of-plane load angle increases from 45° to 90°. For all one fluke length initial towing distance tests, the ultimate holding capacity increases and the ultimate embedment depth decreases as the out-of-plane towing angle increases from 15° to 45°. The three fluke length initial towing distance tests indicate a contrasting trend, in that as the out-of-plane tow angle increases, both the ultimate holding capacity and ultimate embedment depth decrease.
|
10 |
Development of an Innovative Micro Capacitive Humidity Sensor with Double Polyimide Thin Films and Interlacing Out-of-plane ElectrodesLi, Yao-Yu 21 July 2006 (has links)
Polyimide thin films have been widely used in microelectronic and Micro-Electro-Mechanical System applications due to their many excellent characteristics including low dielectric constant, easy processing, good step coverage ability, high heat resistance and chemical resistance.
This paper presents the design, fabrication and complete characterization of an innovative capacitive relative humidity (RH) microsensor. The double polyimide thin films adopted in this study function as a capacitance sensing layer and a protecting layer of top electrodes respectively. To improve the humidity sensitivity and responding speed, interlacing out-of-plane electrodes are designed in the RH microsensor. The higher sensitivity ( 1.25 pF/¢HRH ), optimized sensing linearity ( 99.968¢H ) , very low hysteresis ( 0.24 ¢HRH ), excellent stability ( 1.36 ¢HRH ) , high accuracy ( ¡Ó 1.12 ¢HRH ) and fast response ( within 1 seconds ) characteristics of the RH microsensor have been demonstrated in this thesis.
|
Page generated in 0.1355 seconds