Spelling suggestions: "subject:"oxide inclusion""
1 |
Formation of oxide-inclusions by ladle glaze and a preliminary examination on the possibility of inclusion seperation by bubble floatationTripathi, Nagendra January 2003 (has links)
<p>The present work was to study the role of ladle glaze as apotential supplier of inclusions to the steel melt during theladle refining process. In this study, the total number ofinclusions at the beginning and at the end of the ladletreatment process was found to be increasing with ladle age,which is the number of heats, the ladle being used. Asubstantial increase in inclusion population was noticed aftera certain ladle age.</p><p>Totally four types of inclusions named as; type-1 (MgO),type-2 (spinel), type-3 (an oxide solution) and type-4 (spinelin the center surrounded by the oxide solution of type-3) wereobserved in the beginning of the ladle refining process.Thermodynamic calculation revealed that the type-3 and type-4inclusions were generated by the reactions between EAF slag andladle glaze. Even a part of inclusions of type-2 (spinel phase)could be formed by these reactions. Three types of inclusionswere found before casting, viz. type-5 (oxide solution with lowcontents of MgO and SiO2), type-6 (small MgO islands embeddedin an oxide solution) and type-7 (spinel in the centersurrounded by the oxide solution of type-5). Inclusions of bothtype-5 and type-7 were the products of the reaction betweeninclusions of type-2 and the liquid metal. On the other hand,the occurrence of pieces of MgO having sharp edges in the oxidesolution suggested that the type-6 inclusions were generated bythe ladle glaze.</p><p>A preliminary examination on the possibility of inclusionseparation by bubble floatation, experiments using cold modelswere also carried out. De-ionised water and silicon oil wereused as the bulk phase. Charcoal particles of different sizeranges were employed as the dispersed phase. The examination ofcharcoal-water-gas system indicated that the positivefloatation coefficient is not a sufficient condition for theinclusion separation. The experimental results were found to bein contradiction with the prediction of a typical model thatconsiders interfacial energies. The omitting of the drag forcewas believed to be the reason causing the failure of the modelprediction in the charcoal-water-gas system. The failure of themodel prediction suggested a need of a new model taking intoaccount interfacial energies, drag force, buoyancy force andgravity force.</p><p><b>Key words:</b>oxide inclusions, ladle metallurgy, ladleglaze, inclusion population, ladle age, interfacial tension,inclusion separation</p>
|
2 |
Formation of oxide-inclusions by ladle glaze and a preliminary examination on the possibility of inclusion seperation by bubble floatationTripathi, Nagendra January 2003 (has links)
The present work was to study the role of ladle glaze as apotential supplier of inclusions to the steel melt during theladle refining process. In this study, the total number ofinclusions at the beginning and at the end of the ladletreatment process was found to be increasing with ladle age,which is the number of heats, the ladle being used. Asubstantial increase in inclusion population was noticed aftera certain ladle age. Totally four types of inclusions named as; type-1 (MgO),type-2 (spinel), type-3 (an oxide solution) and type-4 (spinelin the center surrounded by the oxide solution of type-3) wereobserved in the beginning of the ladle refining process.Thermodynamic calculation revealed that the type-3 and type-4inclusions were generated by the reactions between EAF slag andladle glaze. Even a part of inclusions of type-2 (spinel phase)could be formed by these reactions. Three types of inclusionswere found before casting, viz. type-5 (oxide solution with lowcontents of MgO and SiO2), type-6 (small MgO islands embeddedin an oxide solution) and type-7 (spinel in the centersurrounded by the oxide solution of type-5). Inclusions of bothtype-5 and type-7 were the products of the reaction betweeninclusions of type-2 and the liquid metal. On the other hand,the occurrence of pieces of MgO having sharp edges in the oxidesolution suggested that the type-6 inclusions were generated bythe ladle glaze. A preliminary examination on the possibility of inclusionseparation by bubble floatation, experiments using cold modelswere also carried out. De-ionised water and silicon oil wereused as the bulk phase. Charcoal particles of different sizeranges were employed as the dispersed phase. The examination ofcharcoal-water-gas system indicated that the positivefloatation coefficient is not a sufficient condition for theinclusion separation. The experimental results were found to bein contradiction with the prediction of a typical model thatconsiders interfacial energies. The omitting of the drag forcewas believed to be the reason causing the failure of the modelprediction in the charcoal-water-gas system. The failure of themodel prediction suggested a need of a new model taking intoaccount interfacial energies, drag force, buoyancy force andgravity force. <b>Key words:</b>oxide inclusions, ladle metallurgy, ladleglaze, inclusion population, ladle age, interfacial tension,inclusion separation / NR 20140805
|
3 |
Modeling of air entrainment and oxide inclusion formation during pouring of metal castingsMajidi, Seyyed Hojjat 01 December 2018 (has links)
Oxide inclusions are among the most commonly reported defects in ferrous and non-ferrous castings. They affect the surface quality, machinability, and mechanical performance of a cast part. Air entrainment during mold filling is the main source of the oxygen that is consumed in inclusion formation. A quantitative understanding of the formation mechanisms or the prediction of final amounts and locations of oxide inclusions in metal castings is not available. Ductile iron experiments are conducted to study the formation of oxide inclusions during pouring. Oxide inclusions are measured by serial sectioning of the solidified castings. The effect of different gating systems, section thicknesses, and surface orientations on the inclusion formation and final distribution is studied. In addition, a computational model is developed for predicting the formation, motion and final location of oxide inclusions during pouring of metal castings, with the focus on the important mechanism of generation of oxide inclusions due to air entrainment during mold filling. The developed model calculates the local air entrainment rate as a function of the turbulent kinetic energy and the magnitude of the normal velocity gradient of the liquid metal at the liquid-air interface. The turbulent kinetic energy is estimated from the sum of the squares of the fluctuating velocity components relative to a spatially averaged mean velocity. The air entrainment model is implemented in a casting simulation software and validated by comparing its predictions to experimental air entrainment measurements for a circular water jet plunging into a quiescent pool. The liquid velocity, diameter and the turbulence intensity dependence is determined by a single entrainment coefficient. Oxide inclusions are then generated at the liquid-air interface, transported with the melt flow under the combined influences of drag and buoyancy, and captured by the solidifying casting surface. The developed model provides a powerful technique for predicting the oxide inclusion formation and final location.
|
Page generated in 0.0934 seconds