A brief analysis of the nonresonant-coupled parallel resonant converter is performed. The converter is modeled and a reference classical analog controller is designed and simulated. Infrastructure required for digital control of the converter (including anti-aliasing filters and a modulator) is designed and a classical digital controller is designed and simulated, yielding a ~30% degradation in control bandwidth at the worst-case operating point as compared with the analog controller. Based on the strong relationship observed between low-frequency converter gain and operating point, a gain-scheduled digital controller is proposed, designed, and simulated, showing 4:1 improved worst-case control bandwidth as compared with the analog controller. A complete prototype is designed and built which experimentally validates the results of the gain-scheduled controller simulation with good correlation. The three approaches that were investigated are compared and conclusions are drawn. Suggestions for further research are presented. / Master of Science

The project deals with the design of a switch-mode power supply (SMPS) with a medium and high power output. The power supply uses multiphase control switching. Electric energy is converted through a series parallel LLC resonant circuit to reach the maximum efficiency with a small size and cost efficiency of the designed power supply. The semiconductor switches use ZVS (Zero Voltage Switching) on the primary side and ZCS (Zero Current Switching) on the secondary side of the converter. The design of the converter is based on the knowledge of the high power output converters (types of switching, art topologies) and resonant topologies (series resonant circuit – SRC, parallel resonant circuit – PRC and series parallel circuit –SPRC). The design of the converter was done theoreticaly and tested by using simulation program. The simulation and partial tests served to build prototype the Interleaves Converter (ILLC). The function of the converter was tested in laboratory. The laboratory results have been compared with the theoretical and the simulation results.