Materials used in thermal power plants have to resist creep deformation for time periods up to 30 years. Material evaluation is typically based on creep testing with a maximum duration of a few years. This information is used as input when empirically deriving models for creep. These kinds of models are of limited use when considering service conditions or compositions different from those in the experiments. In order to provide a more general model for creep, the mechanisms that give creep strength have to be identified and fundamentally described. By combining tools for thermodynamic modelling and modern dislocation theory the microstructure evolution during creep can be predicted and used as input in creep rate modelling. The model for creep has been utilised to clarify the influence of aluminium on creep strength as a part of the European COST538 action. The results show how AlN is formed at the expense of MX carbonitrides. The role of heat treatment during welding has been analysed. It has been shown that particles start to dissolve already at 800ºC, which is believed to be the main cause of Type IV cracking in commercial alloys. The creep strength of these steels relies on minor additions of alloying elements. Precipitates such as M23C6 carbides and MX carbonitrides give rise to the main strengthening, and remaining elements produce solid solution hardening. Particle growth, coarsening and dissolution have been evaluated. By considering dislocation climb it is possible to determine particle strengthening at high temperatures and long-term service. Transient creep is predicted by considering different types of dislocations. Through the generation and recovery of dislocation densities an increase in work hardening during primary creep is achieved. The role of substructure is included through the composite model. Cavity nucleation and growth are analysed in order to explain the intergranular fracture and to estimate the ductility. / QC20100616

High Entropy Alloy (HEA) is a class of construction steels based on the mixing of five or more elements in approximately equimolar ratios. Despite the ambiguity of their future use, HEAs represent a significantly new group of construction materials that are currently receiving a great deal of attention. Single-phase HEAs fail when used at elevated tempera-tures. The improvement of their high-temperature resistance was achieved by introducing a dispersion of oxides Al2O3 and Y2O3. To generalize the positive effect of dispersions on the mechanical properties at elevated temperatures, particles of a similar nature were cho-sen. These were dispersed particles of nitrides: hardness-incompatible AlN and hardness-compatible BN. The particles were evenly distributed inside the alloys by mechanical al-loying and compacted by SPS (Spark Plasma Sintering). The new structural alloy reached a density higher than 96.5 % and brought an increase in yield strength at room tempera-ture of up to 67 % and 40 % at elevated temperatures, while maintaining a homogeneous distribution of input powders.