This thesis describes the design of a kindergarten in Novy Jicin. It is a detached building on a large and gently sloping land. Visually, kindergarten divided into three parts and it is on two-storey part of themselves compartment attached with two-storey in the middle part. The building has a rugged design (form L-shaped). The building is brick sand-lime blocks with contact thermal insulation system, based upon the strips foundation, nobasement and covered with a warm flat roof. In the single-storey part there is the only MS (max. 25 children). In the middlesection of two-storey there is a main part of kindergarden on the first floor and kindergarten facilities located on the second floor there is a small department with special classes (max. 10 children). The layout of the building is consistent with the operation of kindergartens, fulfill the requirements for barrier-free use, safety, fire resistance and overall stability. The building includes parking for 15 cars. The work includes project documentation for the construction and specialization.

The aim of this diploma thesis is creating a construction documentation for a guest house with a wine cellar. The guest house is a three-storey building. A lounge, which is also meant to serve for ceremonious social gatherings, staff facilities and two accessible rooms are located on the ground floor. First floor consists of several two-bed rooms, one common kitchen and a smaller lounge for guests. Accommodation units for larger groups of guests can be found on the top floor. Vertical supports are made of Porotherm system, ceilings are made of filigree-like reinforced concrete slabs. Roofing of the building is designed as a saddle roof with clay tiles and load-bearing nailed timber trusses. The building is situated in moderate, almost flat terrain. The wine cellar building consists of an underground cellar and a ground floor with a lounge, sanitary facilities and a staircase hall. External walls of the upper part of the cellar are made of CSB framework, partitions are made of Porotherm system, ceiling is made of reinforced concrete slabs. Roofing of the building is designed as a green roof. External walls of other parts of the building are also made of CBS framework, ceiling is a vault-like one supported by prefabricated beams and covered with Miako ceiling panels. The structure is situated in moderate, almost flat terrain, its cellar is sunk under ground level and covered with soil.

The aim of this final thesis was static protection for castle in Miroslavské Knínice. It was necessary to explore several respects and find signs of violation. Next analyze and propose suitable assurance of individual parts. Separe into the stages of construction and to consider the proposal in terms of ensuring the resistance of materials. Finally create a detailed documentation in the range suitable for performance. Based on engineering geology and visual survey was designed horizontal bracing prestressing cables at three levels. The first level "A" consists of a closed circuit of prestressed reinforced concrete passports, supplemented by the cross and construction of prestressed reinforced concrete passports. Next level "B,C" is used to secure the top of the building. Levels “B,C” are proposed using prestressed cable in spare cable channels.

The final thesis „Kindergarten in Zubří“ is processed in the form design documentation for the construction. Kindergarten is designed for fifty children, part of the building is a large garden. It is a detached building with two floors. The surrounding terrain is slightly sloping. Kindergarten is located in a good walking distance from residential buildings in the town. The facility contains three class, the economic part, part of the leadership, part of the hobby activities, the public part. It is a masonry building based on the concrete strip foundations.

Diploma thesis describes the design and processing of project documentation of the apartment building. The apartment building is located in the central part of the city of Brno, in the district of Štýřice. The building has 5 floors. Its basementless with flat roof and it is based on the footings of plain concrete. Load-bearing, peripheral walls and partitions are designed from ceramic blocks POROTHERM. Ceiling construction is designed to be assembled of ceramic ceiling fittings MIAKO built on POT supports. Peripheral walls of all floors are insulated with external thermal insulation composite system ETICS with thermal insulation of mineral wool. In the place of the plinth is wool replaced by XPS polystyrene. In the facade there are anchored wooden lattice constructions using ProPasiv anchors. These constructions are covered by façade cladding sheets CEMBRIT METRO and they devide whole building into separate units. There is housing and communal part of the building. On the first floor there are storage areas, the main service room, utility room and two barrier-free apartments. In the second to the fifth floor there are 9 residential units, one of which is designed as duplex apartment . All floors are connected by staircase and wheelchair lift. Parking for 17 cars is designed in front of the building . Two parking spaces are wheelchair accessible.

The project is newly built wellness hotel in the cadastral Svatý Kopeček, the town of Olomouc, district Olomouc. The house is in a secluded street in Darwin. On the territory are restrictions concerning the parameters solved object. Notably the location, number of floors and the percentage of stopping. This is a three-storey, basement building with a flat roof. The building is based on the footings of plain concrete and reinforced concrete footings. Supporting, peripheral and partition walls are designed from ceramic blocks POROTHERM in the upper floors of concrete formwork and fittings in the basement. Ceiling structure is designed using locally supported reinforced concrete slabs. The entire building is divided into several sections. The 1s there is an underground garage and wellness. In 1.NP is a restaurant and facilities associated with the operation of the restaurant and hotel. In 2.NP and 3.NP are single rooms. Total capacity is 155 people and has 16 employees. To the building are three main entrances. Two of them are designed as public entrance to the restaurant and hotel. The third is the entrance for staff and supplies. Among other inputs that lead from the exterior of the building is the entrance to the restaurant terrace. Another entry is possible from the underground garage to wllnessu. The proposed facility is designed wheelchair. Before the building is designed parking for 27 cars and underground garage for 44 cars. Five of parking places are for disabled people.

The content of this thesis is the design layout and construction of the building of new fire station in South Moravian Region. It is an object split into two interconnected parts: administrative - two-storey, basementless garage for trucks - single-storey, basementless The object is used to perform the services of eight firefighters per shift and one full-time worker. Architecture was chosen so that the object is functionally meet the requirements of firefighters on duty at both organizational (work on PS) and at the operational (exit) procedure. The building is covered with a flat roof, attic walled building on the peripheral wall with white facade and symbols accentuating the purpose of the building. The inner workings of the object are designed to meet the performance demands of service 24ti - hour shifts. The building is brick, based on the footings and load distribution base. The roof structure is made of reinforced concrete load-bearing concrete slab with heat-waterproofing layers classical arrangement of layers. The building is insulated ETICS. This - the operational part is located on the 1st and 2nd floor of the south-western part of the building, single-storey garage built for trucks in the northeastern part.

This thesis describes the design and processing of project documentation multifunctional house. The multifunctional building is located in the central part of the city of Brno, in the district of Štýřice. This is a five-storey, basementless building with a flat roof on two levels. The building is based on foundations made of plain concrete. Supporting, peripheral and partition walls are designed from ceramic blocks POROTHERM. Ceiling construction is designed to be assembled of ceramic ceiling fittings MIAKO stored on POT beams. External walls of all floors are insulated using an external ETICS with thermal insulation made of mineral wool, which is replaced by XPS polystyrene used for plinth. Part of the facade is designed as ventilated, consisting of trusses of wood and sheathed by cladding panels CEMBRIT METRO. This architecturally divide the building into separate units. The building includes parts of the administrative, residential parts and parts for business purposes. On the first floor there are areas of common storage area of the apartment house, the main utility room, utility room. Furthermore, there is an administrative part, where are the reception facilities for reception, sanitary facilities for employees and office work. Part of the first floor is also a small shop with warehouse and facilities for employees. The second floor is a residential unit and the second part of the administrative unit. Third to the fifth floor is only residential and there are 6 residential units. All floors are connected by staircase and a wheelchair lift. In front of the building is designed parking lot for 20 cars. One of the parking space is wheelchair accessible.

This final thesis "Kindergarten Domino" was made as a project documentation for a building construction. The kindergarten is designed for 24 children. Kindergarden is designed as a detached building consists of two above-ground floors. Behind the building, there is a large garden, which is a part of the property. Building is situated on a sloping terrain in a walking distance from a residential area of Šlapanice. There are two operating units: technical part (managemant part) and activity unit. Kindergarten is planed as a masonry building, based on strip foundations.

This diploma thesis deals with the processing of project documentation of student housing in the city of Olomouc. The building is located near the university dormitory accommodation of Palacky University. It is designed to complement the missing type of accommodation. Building is a L-shaped five-storey, without a basement and with a flat roof. Structural system is mostly brick, only part of first floor is solved by columns. The building is divided into three building complexes. Two wings for the accommodation have 4 floors. The connector block has five floors, where the 5th floor is only the engine room. Foundation structures are concrete strips and foundation pads. South side of the building is protected from the sun by sunscreens, on which in a future could be installed photovoltaics. The building is divided into three parts in terms of functionality. 1.NP consists of commercial premises in the southern block and private rooms for accommodated in the eastern block. 2nd-4th floor forms spaces designed to accommodate students. Accommodation capacity is 105 people.