Persistent organic pollutants and heavy metals are released into the environment through different anthropogenic processes. They are of concern because they tend to bioaccumulate in the food chain and show adverse health effects ranging from acute to chronic toxicity. These pollutants need therefore to be monitored to conserve the environment. Conventionally, samples are sent to a laboratory for analysis by standard techniques such as chromatography and spectroscopy. Although these conventional techniques display high accuracy and low detection limits, they are expensive, require the use of highly trained personnel and tedious sample preparation. In comparison, electrochemical methods such as biosensors are sensitive, low cost and simple to operate. In this thesis, the determination of selected persistent organic pollutants (polybrominated diphenyl ethers, polybrominated biphenyls and polychlorinated biphenyls) and heavy metals (Cd, Pb and Cu) was achieved by the use of amperometric inhibition biosensor based on horseradish peroxidase (HRP) immobilized on the surface of platinum-polyaniline modified electrode. Polyaniline (PANI) film was electrochemically deposited on the platinum electrode surface. The film was characterized by cyclic voltammetry and spectrometric techniques. The CV results proved that the PANI was electroactive and exhibited a fast reversible electrochemistry. Characteristic Ultraviolet–Visible and Fourier Transform Infrared features of the polymer film were identified. They revealed that PANI film synthesized in this study is the conductive emeraldine salt. Horseradish peroxidase based biosensor was constructed by electrostatic attachment of the enzyme onto Pt-PANI electrode surface. Spectrometric and cyclic voltammetric results indicated that the immobilized HRP retained its bioelectrocatalytic activity towards the reduction of hydrogen peroxide. The Pt/PANI/HRP biosensor showed a linear response over a concentration range of 0.05 to 3.17 mM with a detection limit of 36.8 nM. Apparent Michaelis- Menten constant ( app M K ) was calculated as 1.04 mM. This implied that the HRP biosensor had a high affinity for H2O2. Furthermore, the fabricated biosensor showed high sensitivity, good reproducibility, repeatability and long-term stability. The Pt/PANI/HRP biosensor was applied to the determination of selected persistent organic pollutants and heavy metals. The latter was found to inhibit the HRP enzyme’s activity. The percentage inhibition of the investigated persistent organic pollutants decreases in the following order: 2,2´4,4´,6-pentabrominated diphenyl ether> 2-brominated biphenyl> 2-chlorinated biphenyl> 2,2´,4,5,5´-pentachlorinated biphenyl> 2,4,4´-trichlorinated biphenyl. In the case of heavy metals, the degree of inhibition of heavy metals was highest for Cd2+, followed by Cu2+ and then Pb2+. Kinetic study for the amperometric response to H2O2, recorded in the absence and presence of persistent organic pollutants and heavy metals revealed that for polybrominated diphenyl ethers, the inhibition process corresponded to a competitive type whereas for polybrominated biphenyls, polychlorinated biphenyls and heavy metals, it corresponded to the on-competitive type. The biosensor exhibited high sensitivity towards the determination of the metals and persistent organic pollutants as pollutants in real water samples, namely tap water and landfill leachate samples. / Thesis (M.Sc.)-University of KwaZulu-Natal, Durban, 2010.

DDT, an extremely widely used organochlorine pesticide, was banned in most developed countries more than 30 years ago. However, DDT residues, including 1,1-dichloro-2,2-bis(4-chlorophenyl)ethylene (DDE), still persist in the environment and have been identified as priority pollutants due to their toxicity and their ability to bioaccumulate and biomagnify in the food chain. In particular, DDE was long believed to be &quotenon-biodegradable&quote, however some microorganisms have now been isolated that are able to metabolise DDE in pure culture. Terrabacter sp. strain DDE-1 was enriched from a DDT-contaminated agricultural soil from the Canterbury plains and is able to metabolise DDE to 4-chlorobenzoic acid when induced with biphenyl. The primary objective of this study was to identify the gene(s) responsible for Terrabacter sp. strain DDE-1�s ability to metabolise DDE and, in particular, to investigate the hypothesis that DDE-1 degrades DDE cometabolically via a biphenyl degradation pathway. Catabolism of biphenyl by strain DDE-1 was demonstrated, and a biphenyl degradation (bph) gene cluster containing bphDA1A2A3A4BCST genes was identified. The bphDA1A2A3A4BC genes are predicted to encode a biphenyl degradation upper pathway for the degradation of biphenyl to benzoate and cis-2-hydroxypenta-2,4-dienoate and the bphST genes are predicted to encode a two-component signal transduction system involved in regulation of biphenyl catabolism. The bph gene cluster was found to be located on a linear plasmid, designated pBPH1. A plasmid-cured strain (MJ-2) was unable to catabolise both biphenyl and DDE, supporting the hypothesis that strain DDE-1 degrades DDE cometabolically via the biphenyl degradation pathway. Furthermore, preliminary evidence from DDE overlayer agar plate assays suggested that Pseudomonas aeruginosa carrying the strain DDE-1 bphA1A2A3A4BC genes is able to catabolise DDE when grown in the presence of biphenyl. A second objective of this study was to characterise pBPH1. The complete 84,054-bp sequence of the plasmid was determined. Annotation of the DNA sequence data revealed seventy-six ORFs predicted to encode proteins, four pseudogenes, and ten gene fragments. Putative functions were assigned to forty-two of the ORF and pseudogenes. Besides biphenyl catabolism, the major functional classes of the predicted proteins were transposition, regulation, heavy metal transport/resistance, and plasmid maintenance and replication. It was shown that pBPH1 has the terminal structural features of an actinomycete invertron, including terminal proteins and terminal inverted repeats (TIRs). This is the first report detailing the nucleotide sequence and characterisation of a (linear) plasmid from the genus Terrabacter.

No description available.

No description available.

No description available.

No description available.

This thesis describes the development and the use of quantitative deuterium Nuclear Magnetic Resonance spectroscopy (NMR) as a tool in two areas of environmental research: the study of long term climate-plant interactions and the source tracking of persistent organic pollutant. Long-term interactions between plants and climate will influence climate change during this century and beyond, but cannot be studied in manipulative experiments. We propose that long tree rings series can serve as records for tracking such interactions during past centuries. The abundance of the stable hydrogen isotope deuterium (D) is influenced by physical and biochemical isotope fractionations. Because the overlapping effects of these fractionations are not understood, studies of the D abundance of tree rings led to conflicting results. We hypothesized that both types of fractionations can be separated if the D abundance of individual C-H groups of metabolites can be measured, that is if individual D isotopomers are quantified. The first paper describes a technique for quantification of D isotopomers in tree-ring cellulose by NMR. The technique showed that the D isotopomers distribution (DID) was non-random. Therefore, the abundance of each isotopomer potentially contains individual information which suggests an explanation for the conflicting results obtained by measuring the overall D abundance (dD). In the second paper, this technique was used to study hydrogen isotope exchange during cellulose synthesis in tree rings. This revealed that some C-H positions exchange strongly with xylem water, while others do not. This means that the exchanging C-H positions should acquire the D abundance of source water, which is determined by physical fractionations, while non-exchanging C-H positions of tree-ring cellulose should retain biochemical fractionations from the leaf level. Therefore, the abundance of the corresponding D isotopomers should contain information about climate and physiology. When analysing tree-ring series, the DIDs should reflect information about temperature, transpiration and regulation of photosynthesis. In the third paper, we showed that CO2 concentration during photosynthesis determines a specific abundance ratio of D isotopomers. This dependence was found in metabolites of annual plants, and in tree-ring cellulose. This result shows that D isotopomers of tree-ring series may be used to detect long-term CO2 fertilisation effects. This information is essential to forecast adaptations of plants to increasing CO2 concentrations on time scales of centuries. In the fourth paper, the source of persistent organic pollutants in the environment was tracked using DID measurements. The dD values of two compounds of related structures were not enough to show indisputably that they did not originate from the same source. However, the DIDs of the common part between the two compounds proved that they did not originate from the same source. These results underline the superior discriminatory power of DIDs, compared to dD measurements. The versatility of DID measurements makes them a precious tool in addressing questions that can not be answered by dD measurements. / Betson, Tatiana R

Thesis (Ph. D.)--University of Helsinki, 2000. / Includes bibliographical references (p. 35-43). Also available in electronic format via Internet.

Thesis (M.Sc.) - Carleton University, 2006. / Includes bibliographical references. Also available in electronic format on the Internet.

No description available.