1 |
Design and processing of low alloy high carbon steels by powder metallurgy : P/M processing and liquid phase sintering of newly designed low-alloy high carbon steels based on Fe-0.85Mo-C-Si-Mn with high toughness and strengthAbosbaia, Alhadi Amar Salem January 2010 (has links)
The work presented has the ultimate aim to increase dynamic mechanical properties by improvements in density and optimisation of microstructure of ultra high carbon PM steels by careful selection of processes, i.e. mixing, binding, alloying, heating profile and intelligent heat treatment. ThermoCalc modelling was employed to predict liquid phase amounts for two different powder grades, Astaloy 85Mo or Astaloy CrL with additive elements such as (0.4-0.6wt%)Si, (1.2-1.4wt%)C and (1-1.5wt%)Mn, in the sintering temperature range 1285-1300ºC and such powder mixes were pressed and liquid phase sintered. In high-C steels carbide networks form at the prior particle boundaries, leading to brittleness, unless the steel is heat-treated. To assist the breaking up of these continuous carbide networks, 0.4-0.6% silicon, in the form of silicon carbide, was added. The water gas shift reaction (C + H2O = CO + H2, start from ~500ºC) and Boudouard reaction (from ~500ºC complete ~930ºC) form CO gas in the early part of sintering and can lead to large porosity, which lowers mechanical properties. With the use of careful powder drying, low dew point atmospheres and optimisation of heating profiles, densities in excess of 7.70g/cm3 were attained. The brittle microstructure, containing carbide networks and free of cracks, is transformed by intelligent heat treatment to a tougher one of ferrite plus sub-micron spheroidised carbides. This gives the potential for production of components, which are both tough and suitable for sizing to improve dimensional tolerance. Yield strengths up to 410 MPa, fracture strengths up to 950 MPa and strains of up to 16 % were attained. Forging experiments were subsequently carried out for spheroidised specimens of Fe-0.85Mo+06Si+1.4C, for different strain rates of 10-3, 10-2, 10-1 and 1sec-1 and heated in argon to 700ºC, density ~7.8g/cm3 and 769 MPa yield strength were obtained.
|
2 |
Design and processing of low alloy high carbon steels by powder metallurgy. P/M processing and liquid phase sintering of newly designed low-alloy high carbon steels based on Fe-0.85Mo-C-Si-Mn with high toughness and strength.Abosbaia, Alhadi A.S. January 2010 (has links)
The work presented has the ultimate aim to increase dynamic mechanical properties by improvements in density and optimisation of microstructure of ultra high carbon PM steels by careful selection of processes, i.e. mixing, binding, alloying, heating profile and intelligent heat treatment. ThermoCalc modelling was employed to predict liquid phase amounts for two different powder grades, Astaloy 85Mo or Astaloy CrL with additive elements such as (0.4-0.6wt%)Si, (1.2-1.4wt%)C and (1-1.5wt%)Mn, in the sintering temperature range 1285-1300ºC and such powder mixes were pressed and liquid phase sintered. In high-C steels carbide networks form at the prior particle boundaries, leading to brittleness, unless the steel is heat-treated. To assist the breaking up of these continuous carbide networks, 0.4-0.6% silicon, in the form of silicon carbide, was added. The water gas shift reaction (C + H2O = CO + H2, start from ~500ºC) and Boudouard reaction (from ~500ºC complete ~930ºC) form CO gas in the early part of sintering and can lead to large porosity, which lowers mechanical properties. With the use of careful powder drying, low dew point atmospheres and optimisation of heating profiles, densities in excess of 7.70g/cm3 were attained. The brittle microstructure, containing carbide networks and free of cracks, is transformed by intelligent heat treatment to a tougher one of ferrite plus sub-micron spheroidised carbides. This gives the potential for production of components, which are both tough and suitable for sizing to improve dimensional tolerance. Yield strengths up to 410 MPa, fracture strengths up to 950 MPa and strains of up to 16 % were attained. Forging experiments were subsequently carried out for spheroidised specimens of Fe-0.85Mo+06Si+1.4C, for different strain rates of 10-3, 10-2, 10-1 and 1sec-1 and heated in argon to 700¿C, density ~7.8g/cm3 and 769 MPa yield strength were obtained. / Libyan Education Ministry Office
|
3 |
An integrated metamorphic and geochronological study of the south-eastern Tibetan plateauWeller, Owen M. January 2014 (has links)
The Tibetan plateau is a vast, elevated region located in central Asia, which is underlain by the thickest crust known on Earth (up to 90 km). An outstanding question of importance to many fields within geology is how and why did the Tibetan plateau form? Models attribute the growth of the plateau to a consequence of the ongoing India-Asia continental collision, but differ in the details of how the crustal thickening was accommodated: was it by underplating of Indian lower crust or by homogeneous shortening? High-grade metamorphic rocks sampled from the region potentially hold the key to answering this question, as they contain a record of past tectonic events that can discriminate between the various proposed models. This record can be decoded by integrating field, thermobarometric and geochronological techniques, to elucidate a detailed thermotectonic understanding of a region. This methodology was applied to three case studies, each of which targeted rare tectonic windows into the mid-crust of the plateau. These regions comprise Danba in eastern Tibet, Basong Tso in south-eastern Tibet and the Western Nyainqentanglha in southern Tibet. Each case study documents previously unreported metamorphic events that have allowed original interpretations to be made regarding tectonic evolution: in Danba, all metamorphism is shown to be early Jurassic; in Basong Tso, two metamorphic belts are documented that reveal a late Triassic--early Jurassic orogenic event; and in the Western Nyainqengtanglha, Cretaceous--Neogene magmatism is shown to overprint late Triassic metamorphism. Integration of the results has enabled commentary on the large scale evolution of the Tibetan plateau from the Permian until the present day, and even hinted at its future. The results indicate that the closure of the Paleotethys played an important role in the construction of the Tibetan plateau, and suggest that homogeneous crustal thickening is not a viable model for the documented exposure levels.
|
Page generated in 0.0909 seconds