Photosynthetic Microbial Fuel Cell (p-MFC) research aims to develop devices containing photosynthetic micro-organisms to produce electricity. Micro-organisms within the device photosynthesise carbohydrates under illumination, and produce reductive equivalents (excess electrons) from both carbohydrate production and the subsequent carbohydrate break down. Redox mediators are utilised to shuttle electrons between the organism and the electrode. The mediator is reduced by the micro-organism and subsequently re-oxidised at the electrode. However this technology is in its early stages and extensive research is required for p-MFC devices to become economically viable. A basic p-MFC device containing a potassium ferricyanide mediator and the algae Chlorella vulgaris was assembled and tested. From these initial experiments it was realised that much more work was required to characterise cell and redox mediator activities occurring within the device. There is very little p-MFC literature dealing with cellular interaction with redox mediators, but without this knowledge the output of complete p-MFC devices can not be fully understood. This thesis presents research into the reduction of redox mediators by the micro-organisms, including rates of mediator reduction and factors affecting the rate. Both electrochemical and non-electrochemical techniques are used and results compared. Additionally, cellular effects relating to the presence of the mediator are studied; crucial to provide limits within which p-MFCs must be used. After basic characterisation, this thesis presents work into the optimisation of the basic p-MFC. Different redox mediators, photosynthetic species and anodic materials are investigated. Importantly, it is only through fundamental characterization to improve understanding that p-MFCs can be optimised.

Photosynthetic biofilms have much higher cell density than suspended cultures and when grown in a stacked waveguide configuration, can have orders of magnitude higher areal productivity. Evanescent and plasmonic growth of biofilm cultures have been demonstrated, solving issues with light penetration impeding growth, but thus far the technology has been limited to biofuel production applications. In this thesis, plasmonically excited cyanobacterial biofilms are used to produce electrical power in a photosynthetic-plasmonic-voltaic device. This approach uses red lasers to deliver light to cells via an optical waveguide through the generation of surface plasmons at the interface between a metal and dielectric, in this case a glass-gold-air interface. This gold film serves a dual purpose as a current collector for electrons generated at the cell surface. Experiments presented here demonstrate positive power output light response under both direct light and plasmonic excitation and produced equivalent power output of 6 uW/m2 under similar light power intensities.

Photosynthetic biofilms have much higher cell density than suspended cultures and when grown in a stacked waveguide configuration, can have orders of magnitude higher areal productivity. Evanescent and plasmonic growth of biofilm cultures have been demonstrated, solving issues with light penetration impeding growth, but thus far the technology has been limited to biofuel production applications. In this thesis, plasmonically excited cyanobacterial biofilms are used to produce electrical power in a photosynthetic-plasmonic-voltaic device. This approach uses red lasers to deliver light to cells via an optical waveguide through the generation of surface plasmons at the interface between a metal and dielectric, in this case a glass-gold-air interface. This gold film serves a dual purpose as a current collector for electrons generated at the cell surface. Experiments presented here demonstrate positive power output light response under both direct light and plasmonic excitation and produced equivalent power output of 6 uW/m2 under similar light power intensities.