The thesis describes ways ejection pinions automotive starter and evaluation of the advantages and disadvantages of each solution. The first chapter deals with the principle of operation of DC motors and starters parameters. In the second part, the individual systems are theoretically discussed in terms of design and their advantages and disadvantages. The third part is focused on the most common system, which is analyzed in terms of mechanical and electrical reliability. The last point of the work is to design an experimental analysis Reach starter pinion.

This master's thesis describes a design of horizontal boring mills. The first part is dedicated to description of the various types of these machines and their accessories. There are also described drives and linear guideways. There is a list of plate horizontal boring mills of Czech and foreign producers. The second part of this thesis deals with designing of comlete machine's bed and its slides (X-axis). Casting of the bed and its slides are designed for universal machining to the use of rolling or hydrostatic guideways. The drive of X-axis is also designed and it works in master/slave mode. The final result of this master's thesis is a 3D model of the machine in two variants, with hydrostatic and rolling quideways. Machining drawings of the bed for both variants are attached to this thesis.

The subject of this thesis is design of feed box for axis x of portal milling machine center FRP 300 from production of TOS Kuřim-OS, a.s. Thesis contains recherche in application field of rack and pinion drives for machine tools feed mechanisms, possible design solutions of given task and elaborate of the most appropriate solution. Thesis further includes calculations, 3D model and drawings of selected parts.

This thesis describes a project of a mobile stage device that will be used for a concert tour of Lucie. The first part characterizes the given task and expounds description and function of the device itself. The second part focuses on the design concept of supporting frames. This is followed by design and calculation of all mechanisms, actuators and construction of individual moving parts of a sliding and lifting platform. The last part verifies stability of the whole construction in accordance with appropriate standards. The thesis also contains technical documentation, which is to be found in appendix.

The aim of this master's thesis are the engineering design of solutions for vertical elevator drive storage systém LLH – Schwerlast. The project is composed of technical report ans drawing documentation. The Technical report deals with storage and handling bar material, methods of control and manipulation of storage systems and structural design. In the structural part are designed draft drive and its main parts. The main parts of drive are checked using structural analysis. The drawing documentation is composed of assembly drawing, manufacturing dravings and welded frame drawing.

This master’s thesis is deal with the area of determining the static transmission error in spur gears. Nowadays, around vibration and noise formation, the issue of transmission error is being discussed quite often. In the first part of this master’s thesis, there is a description of the theoretical requirements concerning the above stated issue. These theoretical requirements are further applied in parametric planning of the spur gears as well as in measuring the transmission error itself. In this master’s thesis, both the detailed description of planning the parametric model of spur gears and the strain-stress analysis may be found. These requirements are needed for calculating the transmission error. In conclusion of this master’s thesis, specific results of the static transmission error in spur gears achieved at diversifying load torque, center distance modifications as well as tip relief modifications of spur gears are being presented. The issue was solved by computation approach with the help of CAD software called Creo Parametric and FEM software called Ansys Workbench and Ansys Mechanical APDL.

This diploma thesis deals with the design of linear axis for heavy machine tool. The thesis describes the definition of heavy machine tool and its basic construction nodes. The next chapter describes the components of the linear feed assemblages, the basic principles of use and their advantages and disadvantages. On the basis of this research part there are selected variants of the solution and in the last part of the thesis there is a design of the axis X of the gantry machine tool. Part of the work is a 3D model of the proposed feed assemblages and part of the drawing documentation.

This diploma thesis deals with the design the drive of the feed coordinate portal machining center using a gear rack and pinion. The thesis contains researches from the area of CNC machining centers for non-rotating parts and sliding linear systems. Market analysis of portal machining centers of type of lower gantry with a gear rack and pinion was done. Furthermore, several design variants are proposed in terms of positioning the drive on the machine. These variants were further compared and the best option was selected for the specified machine. Subsequently, the technical calculation of the drive is performed and individual parameters and structural elements are proposed. The thesis also includes a 3D model of the proposed variant and the required drawing documentation.

This diploma thesis deals with the design of the linear axis of a heavy machine tool. It describes the basic specifications of these machines, their manufacturers, the parts of which the axis consists and the design itself. The design includes several design variants, calculation of the movement mechanism, drive and linear guide. Follows the selection of the most suitable variant and the drawing documentation of the resulting linear axis.

The aim of the thesis is based on specified parameters positioning units, which include stroke (1m, 2m, 4m), load (5kg, 50kg, 500kg), you place the position accuracy (0.04 mm) and dynamic (maximum attainable speed 1.5 m / s), proposals to build a ball screw, linear motor, a toothed belt and toothed comb. For selected variants of positioning units to design a 3D model of positioning units. The proposed variations to compare and define their advantages / disadvantages, techno-economic comparison, the limit values of individual designs, etc. The work includes a search drive in positioning units, design units with toothed belt, a toothed comb, ball screw linear actuator, a calculated message of individual proposals then 3D design options for the ball screw and linear motor including drawings and assembly drawings.