The term“Digital X-ray Imaging" refers to a variety of technologies that electronically capture x-ray images. Once captured the images may be electronically processed, stored, displayed and communicated. Digital imaging has the potential to overcome weaknesses inherent in traditional screen-film imaging, with high detection efficiency, high dynamic range and the capability for contrast enhancement. Image processing also makes possible innovative techniques such as computer-aided diagnosis, tomosynthesis, dual-energy imaging, and digital subtraction imaging. Several different approaches to digital imaging are being studied, and in some cases, have been developed and are being marketed. Common to all these approaches are a number of technological and medical issues to be resolved. One of the technological issues is the optimal pixel size for any particular image sensor technology. In general, the spatial resolution of the digital image is limited by the pixel size. Unfortunately while reducing pixel size improves spatial resolution this comes at the expense of signal to noise ratio (SNR). In a scintillator-charge-coupled device (CCD) system, the signal can be increased by improving the efficiency of the scintillator or by reducing noise. This study used a very low noise CCD to determine if image quality, as indicated by the modulation transfer function (MTF), the noise power spectrum (NPS) and the detective quantum efficiency (DQE), could be maintained while reducing pixel size. Two scintillators, one a commonly used radiographic screen the other a thallium doped cesium iodide scintillator, were used and the results compared. The results of this study show that image quality can be maintained as pixel size is reduced and that high DQE can be attained and maintained over a wide range of spatial frequencies with a well designed scintillator.

An accurate estimation of biomass burning emissions is in part limited by the lack of knowledge of fire burning phase (smoldering/flaming). In recent years, several fire detection products have been developed to provide information of fire radiative power (FRP), location, size, and temperature of fire pixels, but no information regarding fire burning phase is retrieved. The Day-Night band (DNB) aboard Visible Infrared Imaging Radiometer Suite (VIIRS) is sensitive to visible light from flaming fires in the night. In contrast, VIIRS 4 µm moderate resolution band #13 (M13), though capable to detect fires at all phases, has no direct sensitivity for discerning fire phase. However, the hybrid usage of VIIRS DNB and M-bands data is hampered due to their different scanning technology and spatial resolution. In this study, we present a novel method to rapidly and accurately resample DNB pixel radiances to M-band pixels’ footprint that is based on DNB and M-band’s respective characteristics in their onboard schemes for detector aggregation and bow-tie effect removals. Subsequently, the visible energy fraction (VEF) as an indicator of fire burning phase is introduced and is calculated as the ratio of visible light power (VLP) and FRP for each fire pixel retrieved from VIIRS 750 m active fire product. A global distribution of VEF values, and thereby the fire phase, is quantitatively obtained, showing mostly smoldering wildfires such as peatland fires (with smaller VEF values) in Indonesia, flaming wildfires (with larger VEF values) over grasslands and savannahs in sub-Sahel region, and gas fares with largest VEF values in the Middle East. VEF is highly correlated with modified combustion efficiency (MCE) for different land cover types or regions. These results together with a case study of the 2018 California Campfire show that the VEF has the potential to be an indicator of fire combustion phase for each fire pixel, appropriate for estimating emission factors at the satellite pixel level.

This diploma thesis is focused on the analysis of results accuracy of astronomical positioning. It describes observation methods and the latest surveying systems used in geodetic astronomy. Further in the thesis there is the description of surveying system MAAS-1. Subject of the elaboration is the data obtained by measuring with this system. Testing is focused on digital camera. There is also an analysis of the results of geographical coordinates, depending on the accuracy of determining the angled pixel size and also on the accuracy of the input coordinates.