1 |
Yield surfaces in cyclic plasticityAdkin, P. January 1986 (has links)
No description available.
|
2 |
The mechanical and thermal behaviour of polymers under high strain rate compressionDawson, Patricia Carol January 1993 (has links)
Relatively few studies have been carried out on polymers at high rates of deformation compared to more traditional materials such as metals, and it is therefore important to develop constitutive models to help predict how materials will behave under specified conditions. The stress-strain behaviour of polymers shows a very marked dependence on time (or rate) and temperature. Polymers (including polyethylene, polypropylene, nylon 66, polyetherketone, polyetheretherketone, a liquid crystal polymer, polyethersulphone and polycarbonate) have been compressed at strain rates of -10-3 to 1O-1s-1 (using an "Instron" which measures deformation versus time at constant rates of compression) and _103s-1 (using a novel drop-weight impact machine) to strains of up to -100%. This drop-weight system is different from commercially available machines in that it operates in compression rather than fracturing specimens and provides stress-strain data directly. The initial crystallinity and orientation of specimens were examined using x-ray diffraction, and kinetic decomposition parameters were obtained using differential scanning calorimetry. Also thermocouples were inserted into some specimens compressed at high strain rates in order to measure any rises in temperature. Several important results have emerged so far: I) sufficiently high bulk temperature rises occ;ur during high rate deformation to considerably alter the stress-strain curve from isothermal conditions; 2) localised deformation in the form of cracking or shear banding in tough polymers appears to lead to temperature rises sufficiently high for significant thermal decomposition to occur; 3) data obtained at lower rates could be approximately fitted to the Eyring Theory unlike that obtained at the highest rate; 4) initial investigations suggest that Poisson's ratio varies with strain and strain rate and is not a constant of 0.5 as generally assumed.
|
3 |
Mechanics of mandrel-expanded bushing installation in fastener holes in aluminium alloy lugsHyzer, James B. January 1991 (has links)
No description available.
|
4 |
Experimental and finite-element analyses of deformation of a material model containing an inclusionParsapour, Bahman January 1993 (has links)
No description available.
|
5 |
The Plastic Deformation and Stress Distribution of Stent in the ArteryChen, Yung-yu 11 July 2006 (has links)
The plastic deformation of stent during the implantation process, with considering the effect of artery and plaque, was investigated in this thesis. The stress-stretch relationships of porcine coronary arteries and aortas were obtained by the tensile test. The nonlinear ABAQUS finite element software was used in the analysis. The nonlinear-elastic, plastic and linear elastic material models for artery-plaque, stent and balloon were employed respectively.
In this thesis, the initial folded balloon model was proposed to simulate the whole inflation and deflation process of balloon deformation. To investigate the effect of artery with plaque on the deformation of stent, the FEM model with considering the artery and plaque was proposed to simulate the expansion process of stents. The plaque¡¦s destruction during the expansion of stent was studied. The effects of plaque¡¦s thickness and the artery models on the expansion of stent were investigated.
The effects of geometrical parameters and the influences on the deformation and the stress distribution of Palmaz type stent were discussed. The expansion ability and foreshortening of Chen and Tsai¡¦s stent were also assessed in this work. The results indicate that the limited expansion ability make Chen and Tsai¡¦s stent be not suitable for using as coronary stent. It might be used as the stent of carotid artery if its expansion ability improved by properly designing stent¡¦s diameter and geometry shape. The results reveal the foreshortening of Chen and Tsai¡¦s stent does not approach to zero as mentioned by Chen. A Chen modified and Tsai¡¦s stent was also proposed in this study. The simulation results show that the foreshortening in the Chen modified type is improved.
|
6 |
Thermal stability of submicron grain structure in an Al-Sc alloy.Bommareddy, Aravinda Reddy, Materials Science & Engineering, Faculty of Science, UNSW January 2008 (has links)
Severe plastic deformation (SPD) has been used over the past few decades for producing submicron grain (SMG) structures in range of metals and alloys. Equal channel angular pressing (ECAP) is a useful process for producing these types of structures whereby the material is deformed to very high plastic strains by passing a billet several times through the ECAP die. This process has an added advantage maintaining the initial dimensions of the billet. SMG materials produced by ECAP and related routes are useful as they usually exhibit excellent properties including high strength and hardness, and excellent superplastic formability: these and other properties make SMG materials useful for industrial and aerospace applications. In this thesis, a binary aluminium alloy containing a very low concentration of scandium (0.1 wt. %) Sc alloy was investigated and compared with higher Sc-containing alloys. The material was deformed by ECAP in the solution treated condition to an equivalent von Mises strain of 9.2 then pre-aged at 250 0C to generate a submicron grained material containing a relatively uniform dispersion of nanosized Al3Sc dispersiods. The thermal stability of this pre-aged microstructure was investigated by annealing at temperatures up to 450 0C resulted in continuous grain coarsening by the process of continuous recrystallization whereby the initial microstructure evolves gradually with no marked change in the grain size distribution, texture and grain boundary character. However, extended annealing (> 1h) at 4500 C resulted in discontinuous grain coarsening (often termed recrystallization) whereby a few grains grow rapidly to eventually produce a coarse-grained final microstructure. Throughout annealing, there was a good correlation between the dispersion parameter, (f/d) where f and d is the volume fraction and the mean diameter of Al3Sc particles in the alloy, respectively, and both the mean grain size (D ) and D /D max where max D is the maximum grain diameter observed in the microstructure. The grain structure was found to undergo moderate coarsening at the high f/d-values but converted to a coarsegrained structure for f/d ~<0.5/μm, and this change occurred when the mean grain diameter was ~ 3-4μm. Hence, the critical value of the dispersion parameter for the transition from continuous to discontinuous coarsening falls between the theoretical value for submicron grain size alloys (f/d ~ 1.5/μm) and the value found for conventionally-deformed alloys (f/d ~ 0.1/μm). This behaviour is the result of the alloy no longer being ultra-fine grained at the onset of discontinuous coarsening.
|
7 |
Effect of ausforming via severe plastic deformation on shape memory behavior of NiTiKulkarni, Ajay V. 12 April 2006 (has links)
In this study, Thermomechanical properties of Ti-50.8 and 50.7 at% Ni alloy severely deformed using Equal Channel Angular Extrusion (ECAE) are investigated. The aim of this study is to reveal the effects of severe plastic deformation on shape memory, pseudelasticity, interplay between plastic deformation via dislocation slip and twinning, and forward and reverse martensitic transformation. The samples are processed at room temperature, i.e. slightly above the austenite finish temperature, and at 450 °C, i.e. well-above the austenite finish temperature. Transformation temperatures, microstructural evolution, and thermomechanical properties of ECAE processed samples are studied before and after low temperature annealing heat treatment and compared with conventional cold drawn and precipitation hardened material. The unique findings are: 1) the observation of a mixture of heavily deformed B2 (austenite) and B19 (martensite) phases in the samples processed at room temperature although martensite stabilization was expected, 2) the observation of highly organized, twin-related nanograins in B2 phase of the samples deformed at room temperature which was attributed to B2 to B19' via SIM, and B19' to B2 via SPD (SIM: Stress Induced Martensitic transformation, SPD: Severe Plastic Deformation) transformation sequence, 3) simultaneous observation of B2 austenite and strain induced B19 martensite in the samples deformed at 450 °C, and 4) perfect pseudoelasticity, small pseudoelastic stress hysteresis and excellent cyclic response with no irrecoverable strain up to 1000 cycles for ECAE at 450 °C processed sample. Strain induced martensite in NiTi alloys was reported for the first time. The formation of well-organized twin-related nanograins via severe plastic deformation opens a new opportunity for twinning induced grain boundary engineering in NiTi alloys which significantly improves the matrix strength and the cyclic response against degradation of shape memory and pseudoelasticity.
|
8 |
Room temperature deformation of (001) SrTiO3 single crystalYang, Kai-hsun 14 August 2012 (has links)
Recent interests on the plastic deformation of strontium titanate (SrTiO3) are derived from its unusual ductile-to-brittle-to-ductile transition (DBDT). The transition is divided into three regimes (A, B and C) corresponding to the temperature range of 113 K to 1053 K (-160oC to 780oC), 1053 K to ~ 1503 K (780oC to ~ 1230oC) and ~ 1503 K to 1873 K (~ 1230oC to 1600oC), discovered by Sigle and colleagues in the MPI-Stuttgart. We report the dislocation substructures in (001) single crystal SrTiO3 deformed by Vickers indentation at room temperature, studied by scanning and transmission electron microscopy (SEM and TEM). Dislocation dipoles of screw and edge character are observed and confirmed by inside-outside contrast using g-vector by weak-beam dark field imaging. They are formed by edge trapping, jog dragging and cross slip-pinching off. Similar to dipole breaking off in deformed sapphire (£\-Al2O3) at 1200oC and £^-TiAl intermetallic at room temperature, the dipoles pinch off at one end, and emit a string of loops at trail. Two sets of slip systems {110}<-11 0> and {100}<011> are activated under both 100 g and 1 kg load. The suggestion is that plastic deformation has reached the stage II work hardening, which is characterized by multiplication of dislocations through cross slip, interactions between dislocations, and operating of multiple slip systems.
In nanoindentation experiments, it is generally believed that the shear stress at the onset of plasticity can approach the theoretical shear strength of an ideal. Here we report direct evidence that plasticity in a single crystal SrTiO3 can begin at very small forces, remarkably. However, the shear stresses associated with these very small forces is excess the theoretical shear strength of SrTiO3 (16.1 GPa). Our observations entail correlating quantitative load¡Vdisplacement measurements with individual stage microstructure during nanoindentation experiments in a transmission electron microscope. We also report direct evidence that with the prevalent notion that the first obvious displacement excursion in a nanoindentation test is indicative of the onset of plastic deformation. The SrTiO3 deforms elastically before the pop-in depth, but exhibits a plastic-elastic behavior after that. TEM observations reveal that the slip band is the predominant deformation mechanism in SrTiO3 during indentation. The cracks usually initiate at the intersection of slip bands to produce the sessile dislocations with Burger vectors [1-10] (or [110]) along the (110) (or (1-10)) crack plane. In addition, theoretical analysis confirms that the pop-in event is associated with the onset plasticity of SrTiO3.
The plastic deformation of (001) single crystal SrTiO3 is investigated using compression along [001] at room temperature. A total plastic strain of ~19+2% is consistently obtained. The stress-strain curve exhibiting four work-hardening stages are describable using the stage 0 of axis rotation, the stage I ¡§easy glide¡¨, the stage II multiple slip and the wall-and-cell structure, and the stage III work softening and dynamic recovery before sample fracture takes place. It is revealed by analyzing the microstructure for each work-hardening stage that the plastic deformation of single crystal SrTiO3 closely resembles that of metals. The primary slip systems of [011](0-11) and [01-1](011) predominate in stage I where plastic deformation occurs by the migration of kink pairs in collinear partial dislocations. The activation of multiple slips including [101](-101) and [10-1](101), and [011](0-11) and [0-11](011) in stage II produces the cell-and-wall structure which is also characteristic of plastically deformed metals. In stage III with decreasing work-hardening rate, the bow-out dislocation interaction from opposite walls results in annihilation. The reaction between dislocations from adjacent walls produces the resultant dislocations with b = [-110] parallel to the load axis [001]. These dislocations are sessile, which eventually leads to sample fracture.
We have analyzed the microstructure of <001> SrTiO3 single crystal deformed using compression at room temperature using transmission electron microscopy. A representative stress-strain (£m-£`) curve is established, similar to that for metals it consists of three hardening stages before failure occurs at a strain £` = 19+2%. Dislocation analysis suggests that the primary slip systems in [011](0-11) and [0-11](011) are activated in the £m-£` curve stress plateau region usually addressed as easy glide. Three characteristic features are identified from samples deformed to stage I hardening by easy glide: (a) rectangular glide loops, (b) collinear partials, and (c) kink pairs. Dislocations have predominantly pure edge character. Kink pairs are observed only on the edge segments suggesting that screw dislocations have higher mobility. In easy glide, the migration and annihilation of kink pairs occurring on both the trailing and leading partials lends support to a previous report by Castillo-Rodriguez and Sigle (2011) that dislocation glide is controlled by the long-segment limit of a kink-pair model. Pure edge dislocations are dissociated into collinear partials with b = 1/2[011] (or 1/2[0-11]) by glide in (0-11) (or(011)), and kink pairs are formed on both leading and trailing partials. The suggestion is that in the low-stress regime hardening by dislocation pile-up in stage I is compensated for by kink pair nucleation and migration. The overall hardening rate thus remains unchanged at approximately zero, resembling easy glide in the deformation of metals, over an increasing strain of £` ? 4% before reaching stage II hardening.
Microcrack nucleation and propagation behavior in the crack tip was investigated by using transmission electron microscopy (TEM) through compressive test and Vickers indenter. Observation results showed that fracture process was completed in this <001> SrTiO3 single crystal material by connecting dislocations. The crack were nucleated and developed in the dislocation free zone (DFZ) or super thinned area ahead of crack tip under local high stress concentration. The cracks were linked with each other by mutual dislocation emission which expedites the propagation of crack tips effectively. We suggested a dislocation based the Hirsch et al. model of plastic-zone evolution in which dislocations emitted from the crack tip glide away to form a crack-tip plastic zone. Each emitted dislocation reduces the crack tip stress intensity via elastic interactions (the ¡¥¡¥shielding¡¨ effect).
|
9 |
noneKao, Wen-Pin 20 August 2001 (has links)
none
|
10 |
Effect of ausforming via severe plastic deformation on shape memory behavior of NiTiKulkarni, Ajay V. 12 April 2006 (has links)
In this study, Thermomechanical properties of Ti-50.8 and 50.7 at% Ni alloy severely deformed using Equal Channel Angular Extrusion (ECAE) are investigated. The aim of this study is to reveal the effects of severe plastic deformation on shape memory, pseudelasticity, interplay between plastic deformation via dislocation slip and twinning, and forward and reverse martensitic transformation. The samples are processed at room temperature, i.e. slightly above the austenite finish temperature, and at 450 °C, i.e. well-above the austenite finish temperature. Transformation temperatures, microstructural evolution, and thermomechanical properties of ECAE processed samples are studied before and after low temperature annealing heat treatment and compared with conventional cold drawn and precipitation hardened material. The unique findings are: 1) the observation of a mixture of heavily deformed B2 (austenite) and B19 (martensite) phases in the samples processed at room temperature although martensite stabilization was expected, 2) the observation of highly organized, twin-related nanograins in B2 phase of the samples deformed at room temperature which was attributed to B2 to B19' via SIM, and B19' to B2 via SPD (SIM: Stress Induced Martensitic transformation, SPD: Severe Plastic Deformation) transformation sequence, 3) simultaneous observation of B2 austenite and strain induced B19 martensite in the samples deformed at 450 °C, and 4) perfect pseudoelasticity, small pseudoelastic stress hysteresis and excellent cyclic response with no irrecoverable strain up to 1000 cycles for ECAE at 450 °C processed sample. Strain induced martensite in NiTi alloys was reported for the first time. The formation of well-organized twin-related nanograins via severe plastic deformation opens a new opportunity for twinning induced grain boundary engineering in NiTi alloys which significantly improves the matrix strength and the cyclic response against degradation of shape memory and pseudoelasticity.
|
Page generated in 0.0998 seconds