Strengthening, resistant and shielding properties, to name a few, can be achieved by implementing a surface material coating onto an engineering component. Various elements of these compounded parts can augment the functionality of the part, such as, increased life time and more interactive surfaces. Tungsten has proven to be a challenge to plate with other metals, but if done correctly, the results can allow for the cold spray of tungsten. Cold spraying tungsten particles alone provides a challenge because the powder is too hard and instead of adhering, it erodes the surface it is attempting to plate. Coating tungsten in a softer metal, like copper, will allow for the particles to adhere to the surface and create a strengthened and radiation shielded component. It also yields a better surface to electroplate onto in the future, as tungsten itself is hard to plate onto, so the copper layer provides the ability to easily plate other metals. The purpose of this thesis project is to encapsulate tungsten powder within copper, then scale up the process to produce bulk amounts of the material in a batch process. The particles will be encased using an electroplating method, that has been vi turned into a semi-autonomous process for the ease of producing bulk powder. While electroless deposition has previously shown positive results for attaining a uniform coating, making it a semi-batch process for bulk material would have an extreme cost in comparison to electrolytic deposition. The tungsten particles have been successfully enclosed in copper by electrolytic deposition in this set of experimentation using an HF electro-etch pretreatment and ultrasonic agitation during electroplating. Further experimentation will include improved methods of stirring and transferring powder, as the transfer takes too long between the etch and the onset of plating and the stirring method is bulky and reduces the area that can be efficiently plated on.

Engineered components can gain desirable properties when coated with surface materials. Wear-resistant coatings can improve the performance of contacting surfaces and allow for an extended life of the parts. Hard chromium has been the plating material of choice for certain wear and corrosion- resistant coatings because of its desirable combination of chemical resistance, adhesion, and mechanical properties. However, hexavalent chromium, a component of the process for applying hard chromium coatings, has been recognized by the EPA as having hazardous health and environmental impacts. Existing and planned environmental regulations restricts the use of process chemicals containing hexavalent chromium ions. This substantiates a need to develop an environmental friendly process for alternative coatings. Praxair has reported that Cr-Ni-C particles have a better corrosion resistance than current chromium carbide and nickel chromium powders. Today, Cr-Ni-C provides great qualities for flame spray and does not contain the toxic compounds used to deposit hard chromium, but is not compatible with application by cold spray. The purpose of this thesis project is to compare two processes for plating metal powder, chromium nickel carbide (Cr-Ni-C, CRC-410-1 from Praxair), with nickel. The particles were encapsulated using three different methods: one electroplating method previously used on particles, and two electroless plating processes using different solutions. The Cr-Ni-C particles were successfully encapsulated with Ni by one of the electroless deposition methods. The electrolytic deposition experiments did not yield the uniformity of coating without agglomeration that is being attained in industrial practice today. Further research on this method is recommended, due to the material operational cost in an industrial setting that is projected to be over 200 times cheaper than electroless deposition method. In the meantime, it should be possible to produce enough coated powder by electroless deposition to validate the utility of this coated powder in depositing wear- and corrosion-resistant coatings of Cr-Ni-C by cold spray.