Nowadays, European power production has to meet requirements than ever before. Environmentally oriented efforts end of coal mining and burning of coal, on which economies of a great number of countries depend. The main objective of these efforts is primarily the production of green energy from renewable energy sources and reduction of dependence on fossil fuels. However, the disadvantage of renewable sources (photovoltaics, wind farms) is their dependence on the weather conditions. As a result, there might be delays in supply of electricity, which must be compensated. One of the solutions is the launch of a combi cycle plant, which has the possibility of almost prompt start-up and electricity production. The combustion of gas and liquid fuels also ensures almost emission-free operation. In addition, thanks to the use of waste heat energy from the gas turbine, it is possible to operate the combi cycle unit with the character of a power plant and as a heating plant. The aim of this thesis is to search for combi cycles and balance calculation of the combi cycle heating plant under given conditions. In the last point, the approximate dimensions of the calculated heating plant are given.

This diploma thesis researches coffee authenticity problematice, mainly focusing on the authenticity of geographic origin. In the theoretical part of this work, botanical classification is described as well as production technology and processes. The work also includes chemical composition of coffee, describing the major components and changes during production phases. It describes major production areas of the world, in terms of general description and brief history. Problematics with coffee fraud and its identification are also described. Theoretical part also includes general geological description of 17 studied coffee growing regions. Experimental part is devoted to trace amount analysis of selected elements and volatile compounds. The element analysis was conducted using mass spectrometry or optical emission spectrometry, volatile compounds were determined using gas chromatography combined with mass spectrometry detection. Results were statistically described and analyzed, resulting in several discrimination models based on geographic origin.

This diploma thesis deals with actual issues of the contamination in the environment with synthetic fragrances. Musk compounds are infiltrated to many environmental components (especially an aquatic ecosystem) because of their biological persistence and the ability of accumulation. This diploma thesis is focused on the selection and the optimization of method for the determination of musk compounds in real biotic matrices (fish). The isolation of analytes was realized by PSE method and the purification of extract was realized by the method of the adsorption column chromatography. Identification and quantification of individual musk compounds was carried out by GC-MS. In conclusion were results and the contamination of fish from the river Svratka disscissed and evaluated. These fish were caught at the inflow and at the outflow of the wastewater treatment plant.

This diploma thesis is focused on the issue of nonylphenol, degradation product of surfactants. Nonylphenol however most often arises in wastewater treatment plants predominantly during the microbial degradation of nonylphenol ethoxylates used in industry. It is a substance highly bioaccumulative, toxic predominantly to aquatic organisms. Furthermore, it belongs among hormone disruptors. The detailed research was prepared, on the basis which experimental part of diploma thesis was solved. Nonylphenol was determined in samples of the wastewater. The solid phase extraction (SPE) was used for the isolation of the analyte and purification of the extract. The final determination was performed on the gas chromatography with tandem mass spectrometry with time of flight analyzer (TOF). All steps of the preanalytical and the analytical procedure were optimized.

The thesis focuses on the use of passive sampling during an analysis of hormones in drinkable water. In the theoretical part there are described selected passive samplers and the sample of the type of POCIS is described at fuller length. The next chapter engages with steroid hormones and an input of estrogenic hormone into the environment. The thesis contains chapters dealing with possibilities of the determination of hormones in water. It is specialized on the analysis of drinkable and surface water. In the last chapter of the theoretical part there are introduced water works where samples for an experimental assessment were collected from. The experimental part of the thesis presents the specification of the extraction of analytes and an adjustment of used device. In the thesis there are specific calibrations for individual assessment of hormones. The results of the assessment for each collection point are ordered to a well-arranged table. Increased levels of targeted estrogens were not approved in most of sampling points.

This diploma thesis was focused on the analysis of four compounds from brominated flame retardants group, namely pentabromoethylbenzene, hexabromocyclododecane, hexabromobenzene and tetrabromobisphenol A. Matrices were represented by four soil samples and four seat of fire samples. In addition, bisphenol A was also determined. First of all, process of extraction of analytes from matrices was optimized. Three different extraction techniques were tested (pressurized solvent extraction, microwave-assisted extraction and ultrasound-assisted extraction). Next step was to verify stability of target compounds in strongly acidic conditions and to optimize clean-up of extract by column chromatography. Gas chromatography with electron capture detection (GC-ECD) was chosen as an appropriate analytical method for the determination of brominated flame retardants. Bisphenol A was determined by gas chromatography with mass spectrometric detection (GC-MS). The derivatization of phenolic analytes before their final analytical determination was also essential.

Synthetic musk compounds are artificial organic substances commonly used as fragrant constituents of personal care products as parfums, cosmetics, detergents, in-house cleaning and washing agents. Given their large area of applications and their ability to be persistent, they leaked into all parts of ecosystem, especially aquatic one. There have been a big focus on studiyng these compounds, their properties and fate in the different parts of ecosystems in the last years. The aim of master's thesis was carry out the determination of five representatives (habanolide, exaltolide, ambrettolide, musk MC4 and ethylene brassylate) of macrocyclic musk compounds in waste water samples from influent and effluent of three water treatment plants (WWTP Brno-Modřice, WWTP Lednice and WWTP Mikulov). One of the main tasks was to perform a method optimisation for the determination of selected musk compounds in waste water and evaluation and interpretation of the results. Solid phase microextraction (SPME) technique was used for the extraction of analytes, consequently gas chromatography-mass spectrometry was used for analysis of selected analytes. Following evaluation the removal efficiency of musk compounds in the waste water treatment plant was assessed.

This work was focused on the determination of musk compounds in various components of the environment. Synthetic musk compounds are organic substances commonly used as fragrant constituents of detergents, perfumes, cosmetics and other personal care products (PCPs). These compounds contaminate the aquatic environment through municipal wastewater from sewage treatment plants. The result is accumulation of these analytes in the environment and their occurrence in food chain. Synthetic fragrances are commonly detected also in human body; these substances generally belong among relatively new persistent organic pollutants (POPs) because of their persistence, bioaccumulation, and potential toxicity. The aim of this work was to optimize the methods for the determination of selected synthetic fragrances in wastewater (municipal, industrial) and in fish muscle. These analytes were determined in wastewater [the wastewater treatment plant (WWTP) Brno – Modřice, cosmetic manufacturing plant] and in fish Squalius cephalus that had been caught in the river Svratka. The selected analytes (14 substances) originate from the group of nitromusk, polycyclic musk and linear musk compounds. Solid phase microextraction (SPME) [for wastewater samples] and pressurized solvent extraction (PSE) [for fish samples] were used for isolation of analytes from real samples. The identification and quantification of analytes were carried out by high resolution gas chromatography coupled with mass spectrometry detection (GC-MS). The results show that galaxolide (g.L-1) and tonalide (tenths of g.L-1) were polycyclic musk compounds which were found at the highest concentration level in influent and also in effluent samples from the WWTP Brno – Modřice. The most extended nitromusk compound was musk ketone (hundredths of g.L-1). Linear musk compounds were detected in all influent samples (g.L-1). The overall removal efficiency of synthetic musk compounds from wastewater in the WWTP varies within the following ranges: nitromusk compounds 34.4 % – 85.4 %, polycyclic musk compounds 36.7 % – 53.3 % and linear musk compounds 90.5 % – 99.9 %. On the basis of the results it can be stated that wastewater (effluent from the WWTP) is the primary source of musk compounds, especially of the polycyclic ones in the environment. It has been also shown that ultrafiltration used in a cosmetic plant is a highly efficient technology for removing nitromusk and polycyclic musk compounds from industry wastewater. The results from evaluation of the fish contamination by musk compounds show that galaxolide was the substance which reached the highest concentration levels (tens of g.kg-1 l.w.). The results corroborate ubiquitous occurrence of musk compounds in the environment and reduction of using of nitromusk compounds due to their potential toxic properties. It has been shown that the insufficiency of the purifying procedures used in the WWTP Brno – Modřice has a significant influence on the concentration level of polycyclic musk compounds (tonalide, galaxolide) in fish caught from the river Svratka.

This work is focused on the determination of polar pesticides in surface and waste waters. In this study Mecoprop-P, MCPA, Dichlorprop-P, 2,4-D and MCPBA in differently loaded surface waters and communal waters from sewage treatment plants were analyzed. These herbicides are included in the group identified as environmental quality standards. Some of herbicides (2,4-D and MCPA) were selected because their consumption in the Czech Republic exceeds 30 tons a year. Samples were collected prom three rivers near town of Jaroměř (Elbe, Úpa and Metuje Rivers), from one river near the town of Brno (Svratka River) and from inflow and outflow of two sewage treatment plants (WWTP Jaroměř, WWTP Brno – Modřice). Particular rivers were chosen for monitoring due to the probability of occurrence of herbicides, because they flow through agriculturally cultivated areas. Solid phase extraction (SPE) was used for the isolation of target compounds and their concentration. Gas chromatography with tandem mass spectrometry (GC/MS/MS) was used for the determination of target analytes in surface and waste waters. Selected herbicides were detected in all collected samples.

Poly(1,4-diethynylbenzene) ( -conjugated polymer) was prepared as an insoluble polymer network via chain coordination polymerization of 1,4-diethynylbezene catalyzed with [Rh(NBD)acac] complex. Thermodynamic properties and acid-base characteristics of the prepared poly(1,4-diethynylbenzene) were studied by means of Inverse Gas Chromatography (IGC) in the temperature range 80-100 řC. Retention data of selected testing substances were used to determine the Gibbs energy of sorption, the sorption enthalpy and their acid-base and disperse parts as well as the disperse contribution to the surface energy and parameters of KA, KD, ANHPS and DNHPS quantifying the acid-base character of the studied polymer. The results showed that poly(1,4-diethynylbenzene) interacted more efficiently with Lewis bases than with Lewis acids. The values of experimental sorption enthalpy were used for the determination of the parameters KA and KD. Values of these parameters classify poly(1,4-diethynylbenzene) as the material with a slightly acid character. This conclusion is further supported by the results of H. P. Schreiber method based on the application of ANHPS and DNHPS parameters for the evaluation of the acid-base properties of the material. The infrared spectroscopy proved that poly(1,4-diethynylbenzene) contained...