New procedures for preparation of polyacetylenes with highly luminescent naphthalimide groups that might be potentially utilized in optoelectronics and sensors are developed within the framework of present doctoral thesis. The procedures provide luminescent a) linear polyacetylenes that can be processed from solutions, and b) mesoporous network polyacetylenes with high pore volume. Two paths to soluble polyacetylenes are used: (i) copolymerization of ethynyl- functionalized naphthalimide (monomer PN) and a monoethynyl aromate catalyzed with [Rh(nbd)acac], and (ii) modification of poly(disubstituted acetylene)s carrying -chloroalkyl pendants involving the exchange of chlorine atoms for azido groups and subsequent "click"- reaction of Huisgen type of azido groups with ethynyl groups of PN. The PN does not homopolymerize but copolymerizes with ethynylaromates. The highest possible molar fraction of the PN units in copolymers is of 0.5, which suggests the absence of PN dyads or longer sequences in copolymers and the alternating arrangement of PN units in the copolymers of the composition of 0.5. Surprisingly, ethynylarenes that give insoluble homopolymers gave soluble copolymers with PN. The modification procedure requires knowledge on the effect of the monomer structure symmetry and substituent...

3 ABSTRACT Complexes [Rh(cycloolefin)(acac)] (cycloolefin = norborna-2,5-diene, cycloocta- 1,5-diene and cyclooctatetraene) were investigated as catalysts of polymerization of monosubstituted acetylenes into stereoregular cis-transoid polyacetylenes. All complexes were highly active in arylacetylenes polymerizations in both coordinating and non-coordinating solvents. Selection of solvent and cycloolefin ligand of the catalyst allowed the control over polymer MW. The onset of initiation in the [Rh(cycloolefin)(acac)]/monomer systems proceeded as the proton transfer from the monomer molecule to the acac ligand under the release of acetylacetone and coordination of -C≡CR ligand to Rh(cycloolefin) moiety. Cis-transoid poly(phenylacetylene) and poly[(2,4-difluorophenyl)acetylene]s with required initial MW were prepared with these catalysts and submitted to the long-term ageing in which the polymers were exposed to the atmosphere and diffuse daylight either dissolved in tetrahydrofuran or in the solid state. Tightly connected processes of cis-to-trans isomerization of the polymer main-chains double bonds and oxidative degradation were found to proceed during polymers ageing in the solution. Besides, the formation of corresponding cyclotrimers accompanied the polymers ageing. However, the cyclotrimers amount was...

Poly(1,4-diethynylbenzene) ( -conjugated polymer) was prepared as an insoluble polymer network via chain coordination polymerization of 1,4-diethynylbezene catalyzed with [Rh(NBD)acac] complex. Thermodynamic properties and acid-base characteristics of the prepared poly(1,4-diethynylbenzene) were studied by means of Inverse Gas Chromatography (IGC) in the temperature range 80-100 řC. Retention data of selected testing substances were used to determine the Gibbs energy of sorption, the sorption enthalpy and their acid-base and disperse parts as well as the disperse contribution to the surface energy and parameters of KA, KD, ANHPS and DNHPS quantifying the acid-base character of the studied polymer. The results showed that poly(1,4-diethynylbenzene) interacted more efficiently with Lewis bases than with Lewis acids. The values of experimental sorption enthalpy were used for the determination of the parameters KA and KD. Values of these parameters classify poly(1,4-diethynylbenzene) as the material with a slightly acid character. This conclusion is further supported by the results of H. P. Schreiber method based on the application of ANHPS and DNHPS parameters for the evaluation of the acid-base properties of the material. The infrared spectroscopy proved that poly(1,4-diethynylbenzene) contained...

The following monoethynylated N-benzylidene-2-hydroxyanilines were prepared: N-(4- ethynylbenzylidene)-2-hydroxyaniline, N-(3-ethynylbenzylidene)-2-hydroxyaniline, N-(4- ethynylbenzylidene)-2-hydroxy-5-nitroaniline and N-(3-ethynylbenzylidene)-2-hydroxy-5- nitroaniline, which differed in the position of the ethynyl group on the benzylidene ring and the substitution of the hydroxyaniline ring. Monoethynylated N-benzylidene-2- hydroxyanilines were used as the monomers for the chain-growth coordination homo- and copolymerization. The homopolymerization resulted in linear polyacetylene homopolymers with N-benzylidene-2-hydroxyaniline substituents. The copolymerization with multiethynylarene-type cross-linkers provided densely cross-linked copolymeric polyacetylene networks. The linear units of the networks carried N-benzylidene-2- hydroxyaniline substituents, the interconnection between the chains of the networks being realized by arene links. The texture parameters of the prepared networks significantly depended on the type of comonomers used. The highest specific surface area values (~530 m2 /g) were achieved with networks prepared by copolymerization of N-(4- ethynylbenzylidene)-2-hydroxyaniline or N-(3-ethynylbenzylidene)-2-hydroxyaniline,with 4,4'-diethynylbiphenyl used as a cross-linker. Selected...

A new type of organometallic polymer networks with a covalent structure of cross-linked substituted polyacetylenes containing Cu2+ or Pd2+ ions (5 to 17 wt%) has been developed. The metal ions were complexed in the networks predominantly with two N-salicylideneaniline ligands covalently bound to two different network monomeric units. Due to the chosen method of complexation, the metal ions have actively participated (as knots of the network) in the formation of cross-linked architecture of the products. For the preparation of organometallic networks two independent methods were used: (i) the direct polymerization of organometallic monomers and (ii) the two-stage method using postpolymerization introduction of metal ions into polyacetylene polymers containing covalently bound N-salicylideneaniline proligands. The starting low-molecular-weight blocks used for the network synthesis were new substances prepared within the framework of the diploma thesis, namely monomers of the mono- and diethynylated N-salicylideneanilines type and diethynylated organometallic monomers in which two molecules of a monoethynylated N-salicylideneaniline complexed one Mt2+ ion. The ethynylated monomers were polymerized to organometallic networks or precursors of these networks via chain-growth coordination polymerization,...

The preparation of a new group of functionalized conjugated polymer networks has been described based on spontaneous quaternization polymerization of ethynylpyridines with bis(bromomethyl)arenes. The networks consisted of polyacetylene chains with pyridyl and pyridiniumyl pendants cross-linked with -CH2(arylene)CH2- links. The variation of the ratio of monomer and quaternization agent in the feed modified the ratio of pyridyl and pyridiniumyl groups in the networks (pyridyl/pyridiniumyl ratios from 0 to 1.32). The networks did not exhibit a permanent microporosity that could be confirmed by nitrogen adsorption at 77 K. Nevertheless, all networks were active in capture of CO2 at 293 K (up to 0.73 mmol CO2/g, 750 Torr). It has been hypothesized that CO2 capture reflected formation of a temporary porous texture of the networks through conformational changes of the network segments enabled by the segments mobility at room temperature. The preparation of functionalized conjugated polymer networks with permanent micro/mesoporosity (SBET up to 667 m2 /g) has been described that was based on chain coordination copolymerization of acetylenic monomers. The copolymerization of 1,4-diethynylbenzene or 4,4'-diethynylbiphenyl with mono or diethynylbenzenes bearing NO2 or CH2OH groups has been demonstrated as...

(Doctoral Thesis, 2016, Mgr. Tomáš Faukner, IONIC POLYACETYLENE TYPE POLYMERS AND POLYMER NETWORKS BY CATALYST FREE QUATERNIZATION POLYMERIZATION) The composition and structure of a series of ionic π-conjugated poly(monosubstituted acetylene)s prepared via catalyst-free quaternization polymerization (QP) of 2-ethynylpyridine (2EP) activated with equimolar amount of alkyl halide [RX = ethyl bromide, ethyl iodide, nonyl bromide and haxadecyl (cetyl) bromide] as a quaternizing agent (QA) have been studied in detail. The performed QPs gave ionic polymers well soluble in polar solvents, with approximately half of pyridine rings quaternized, which implies that also non-quaternized monomers were involved in the process of QP. The configurational structure of polyacetylene main chains was suggested based on 1 H NMR, IR as well as Raman (SERS) spectral methods. The QPs in bulk gave more expected irregular cis/trans polymers while the QPs in acetonitrile solution gave high-cis polymers. A series of prepared symmetrical bi-pyridylacetylene based monomers has been polymerized via QP approach resulting into a series of new ionic π-conjugated poly(disubstituted acetylene) type materials. It is therefore obvious that the mechanism of quaternization activation frequently applied on monosubstituted...

4 ABSTRACT The synthesis has been described yielding a new type of rigid conjugated polymer networks which possess a high content of permanent micropores and macropores and exhibit high surface areas up to 1469 m2/g. The networks have been prepared via chain-growth coordination polymerization catalysed with insertion catalysts based on Rh complexes. This polymerization has been newly applied to bifunctional acetylenic monomers of diethynylarene type (1,4-diethynylbenzene, 1,3-diethynylbenzene and 4,4'-diethynylbiphenyl). The covalent structure of the networks consists of the polyacetylene main chains densely connected by arylene struts. The W and Mo metathesis catalysts have been revealed as inefficient for the synthesis of these networks. The increase in the polymerization temperature and time has been shown to affect positively the content and the diameter (up to 22 nm) of the mesopores in the networks. A mechanism has been proposed that explains the mesopores formation as a result of mutual knitting of small particles of the microporous polymer. The application of emulsion polymerization technique allowed to prepare texturally hierarchical polyacetylene networks possessing interconnected open macropores (diameter up to 4,8 μm) the walls of which exhibited micro/mesoporous texture. It was demonstrated...